Classic Multi-Purpose Screws – Mixed Tray – PZ – Double Countersunk – Yellow (895pcs)

If you’re the kind of person who roots through a toolbox for the right screw on every job, this yellow multi purpose screw tray is a much better idea. Classic’s 895-piece mixed tray gives you a proper spread of sizes in one go, ready to grab and go on any fixing task that comes up throughout the day.

Each screw in the tray shares the same spec: a 25° sharp point for clean entry without pre-drilling, a 40° deep single thread for high pull-out resistance, and a patented lubrication that reduces drive torque and protects against corrosion. The yellow corrosion-resistant plating does the same job as a wax coat on a good boot — keeps things working even in damp or humid conditions.

The double countersunk head is worth mentioning. It reduces the chance of head shear and helps the screw sit flush without you having to fight it. Surface hardness runs up to 750 HV, so the head won’t strip out under load. Core hardness is up to 450 HV, which keeps the shank from snapping when you’re driving into dense materials.

Where Classic Multi-Purpose Screws Earn Their Keep

These are genuinely all-surface screws. They’ll go into hardwood, softwood, chipboard, MDF, plastic and thin sheet metal without needing you to switch between boxes. That’s the whole point of a tray like this on a busy site or in a van. All sizes up to and including 75mm are fully threaded. Lengths 80mm and above carry a 70mm thread length. On screws 25mm and longer, a single slash reduces torque and the risk of splitting timber when fixing close to an edge — a detail that matters when you’re working in tight spots.

The yellow multi purpose screw tray is a solid choice for joiners, shopfitters, kitchen installers, and anyone who needs a dependable general-purpose screw across a range of lengths and materials without carrying six different boxes.