Sealey 24 inch industrial drum fan with 2-speed motor, 360° tilt, and a maximum airflow of 155.3m³/min. Built for serious air movement in workshops, warehouses, agricultural buildings and commercial spaces. Fitted with a 3-pin plug and ready to work.
Can’t find it? We’ll source it.
No worries! We can usually get this in for next-day delivery or source an alternative. Drop your email and we’ll get straight back to you with options.
Nice one — request received. Check your email to confirm, and we’ll get pricing and availability over to you.
Out of stock
When you need to shift serious volumes of air, a domestic pedestal fan is not going to cut it. The Sealey HVF24S is a 24 inch high velocity fan built for exactly these situations — large industrial spaces, busy workshops, drying out buildings, or anywhere that needs proper airflow rather than a light breeze. With a maximum output of 155.3m³/min (5,484 CFM), it moves air fast and in quantity.
The fan runs on standard 230V supply and comes fitted with a 3-pin plug, so there is no wiring required. Plug it in and it is working within seconds. Two speed settings give you control depending on whether you need background circulation or full-bore air movement. Most sites and workshops will find the high setting more than sufficient for cooling large open areas or clearing airborne dust and fumes from the workspace.
360° Tilt and the Practical Advantage of the Drum Design
The 360° tilt function is one of the more useful features on this fan. Most drum fans offer a limited tilt range — useful to a point, but restrictive if you need airflow directed at floor level, overhead, or at a specific angle across a large space. The HVF24S tilts on a full 360° axis, meaning you can point it precisely where the air needs to go, whether that is straight across a drying floor, up towards a ceiling to drive warm air back down in winter, or directed along a paint bay to assist curing.
The drum format also makes it straightforward to move around site. The frame and handle design means one person can carry it between areas, and it sits stably on the floor without needing to be secured. Worth noting: the heavy-duty gauge steel casing and fully guarded blades are not just about longevity. On a busy workshop floor or agricultural site, you want equipment that can take a knock or two without being written off. The steel construction handles knocks that would buckle a plastic-bodied fan.
Where the Sealey HVF24S Gets Used
This fan earns its keep in a wide range of settings. Industrial and manufacturing units use drum fans like this for general temperature management and ventilation across large open floors. Automotive workshops and spray booths use them to keep air moving during painting and bodywork. Agricultural buildings — particularly livestock housing and storage facilities — benefit from the high-volume airflow during warmer months. Warehouses and distribution centres use them to keep staff comfortable and prevent heat buildup in poorly ventilated areas.
It is equally at home on a construction site drying out a building after plastering or screeding, where moving damp air out quickly is the difference between getting back on programme and waiting around. A 24 inch high velocity fan of this output can make a noticeable difference to drying times when used alongside heating.
The HVF24S is a workhorse. It is not complicated, it does not require setting up for twenty minutes, and it handles the kind of continuous use that lighter fans cannot cope with.
Pro Tip: When using the HVF24S for post-plaster or post-screed drying, position the fan to draw air across the surface rather than blowing directly onto it — this pulls moisture-laden air away from the surface more effectively and reduces the risk of surface cracking from uneven drying.
The Sealey HVF24S is used wherever large volumes of air need to be moved efficiently. On construction sites it is commonly used for building drying after wet trades — plaster, screed and concrete all benefit from consistent airflow to manage moisture levels and speed up the drying process. In automotive workshops and spray booths it keeps air circulating during painting and bodywork, helping to clear fumes and assist curing.
Agricultural buildings, particularly poultry housing, livestock barns and storage facilities, use high velocity drum fans to manage heat and humidity during the warmer months. Warehouses, factories and large commercial spaces use them for general ventilation and temperature management across open floor areas where fixed HVAC systems are absent or insufficient.
Best For
Industrial workshops and manufacturing units
Automotive workshops and spray booths
Agricultural buildings and livestock housing
Warehouses and distribution centres
Construction site building drying
Commercial spaces with poor ventilation
Key Specifications
Blade diameter: 24 inches
Maximum airflow: 155.3m³/min (5,484 CFM)
Speed settings: 2
Tilt range: 360°
Power supply: 230V
Plug: 3-pin fitted
Casing: heavy-duty gauge steel
Key Features
360° tilt function for full directional control
Fully guarded, carefully balanced blades
Heavy-duty steel casing, guard and frame
Portable floor-standing design
Ready to use — plug fitted as standard
Not suitable for: Not suitable for use in wet or outdoor environments unless adequately protected from the elements. This fan is designed for indoor industrial use and is not rated for explosive or hazardous atmospheres.
Position the fan on a stable, level floor surface. Use the 360° tilt adjustment to direct airflow where it is needed before switching on. For large open spaces, pointing the fan along the length of the room rather than across it will generally give better overall air circulation.
Select the appropriate speed setting for the job. Low speed works well for background ventilation and general air circulation; high speed is better suited to active cooling, post-wet-trade drying, or clearing fumes and dust from a workspace. Make sure the area is reasonably clear of loose materials before running on high speed.
Place the fan on a flat, stable surface with adequate clearance around the guard
Adjust the tilt angle to direct airflow towards the target area
Plug the 3-pin cable into a suitable 230V supply
Select the required speed using the 2-speed control
For building drying, position to draw air across wet surfaces rather than blowing directly onto them
Check periodically that the fan remains stable and the guard is clear of obstructions
Can this fan be used outdoors?
The HVF24S is designed for indoor industrial use. It can be used in covered outdoor areas such as open-sided agricultural buildings or large canopies, but it should not be exposed to rain or used in unprotected outdoor conditions. It is not IP-rated for wet environments.
Does the fan oscillate or just tilt?
The fan tilts on a 360° axis, meaning you can lock the airflow direction at any angle you choose. It does not oscillate automatically from side to side. For wide area coverage, it is best positioned centrally and aimed to draw air along the length of the space.
Is this fan suitable for use in a spray booth or paint environment?
The HVF24S is commonly used in automotive workshops and is suitable for general air movement in these environments. However, it is not ATEX-rated and should not be used in areas with flammable vapour concentrations that meet explosive atmosphere classifications. Check your spray booth requirements and relevant safety regulations before use.
The Sealey HVF24S uses a 24 inch fan blade assembly mounted in a heavy-duty gauge steel drum casing with a fully enclosed safety guard. The motor operates on a 230V single-phase supply with two speed settings to vary airflow output up to a maximum of 155.3m³/min (5,484 CFM). The steel frame and casing are built to withstand the physical demands of industrial and agricultural environments, and the blades are carefully balanced to minimise vibration during operation.
Brand
Sealey
Model
HVF24S
Blade Diameter
24 inches
Maximum Airflow
155.3m³/min (5,484 CFM)
Speed Settings
2
Tilt Range
360°
Power Supply
230V
Plug
3-pin fitted
Casing Material
Heavy-duty gauge steel
Guard
Fully enclosed steel
Reviews
There are no reviews yet.
Be the first to review “Sealey Industrial High Velocity Orbital Drum Fan 24″ 230V”Cancel Reply
Reviews
There are no reviews yet.