ForgeFast Impact Bit Set BP 31 piece Pozi/Torx 25mm

The ForgeFast Impact Bit Set gives you a practical selection of 31 Pozi and Torx bits built specifically for impact driver use. This is not a repackaged hand tool set with a new label. These bits are engineered from the ground up to handle the repeated hammering action that impact drivers dish out, making them a sensible investment for anyone running screws daily.

Impact drivers work differently to standard drills. The rotational hammering puts enormous stress on bit tips, and ordinary bits simply crack or round off under that load. ForgeFast addresses this with a torsion zone built into each bit. This shock-absorbing section flexes slightly under peak torque, reducing the chance of tip failure and extending bit life considerably. You will notice the difference when you are halfway through a deck and still on the same bit.

What You Get in the Set

The set covers the sizes you actually reach for on site. Pozi heads include two PZ1, five PZ2 and two PZ3 bits. The Torx selection runs from T10 through to T40, with sensible quantities weighted toward the sizes that see the most use. T20 and T25 get five each, T30 gets five, while the less common T10, T27 and T40 are represented with one or two apiece. There is no filler here. Every bit earns its place.

A 60mm magnetic bit holder completes the set, letting you run the 25mm bits at a usable length for most fixings. The 1/4 inch hex shank fits any standard impact driver chuck.

Built for the Long Haul

ForgeFast uses hardened steel with a black phosphate finish. The hardening process gives each bit the toughness to resist wear, while the phosphate coating adds corrosion resistance. More importantly, the tips are machined to tight tolerances. A well-fitted tip stays centred in the screw head, reducing cam-out and the damaged screw heads that follow. Your wrists will thank you by the end of the day.

For tradespeople who have written off impact bits as disposable, this set changes the maths. Better steel and proper torsion design means fewer replacements, less time stopped mid-fix, and cleaner results. The case keeps everything organised and visible, which matters when you are balancing on a ladder with one hand free.

Whether you are fitting cladding, running decking screws, or assembling frames, having the right bit to hand makes the job quicker. This set covers Pozi for general construction fixings and Torx for the growing number of screws that demand it. One box, sorted.