Multi-Purpose Block Brush
£3.79£4.55 EX VATINC VAT
A tough block brush with 100% synthetic bristles, a built-in bucket hook, and no bristle loss. Handles interior and exterior paints, pastes, and wood treatments with ease. Available in a full range of sizes from 0.5 inch up to 5 inch.
The multi-purpose block brush is one of those tools that earns its place on the site because it just does the job without fuss. Whether you are cutting in with emulsion, slapping on a wood treatment, or working paste into a rough masonry surface, this brush handles all of it without falling apart halfway through. The 100% synthetic bristles are designed to hold a solid load of paint or paste, which means fewer trips back to the bucket and more ground covered per stroke.
The bristles are stiff enough to work across uneven and rough surfaces without folding or splaying uselessly. Anyone who has tried to paste a textured wall with a cheap brush that just bends over and gives up will appreciate that immediately. These bristles push the product in rather than skimming over the top, which makes a real difference on blockwork, rough render, or any timber with a bit of texture to it.
What Makes This Multi-Purpose Block Brush Worth Having on Site
One feature that sounds minor until you are actually using it is the built-in bracket on the handle. It hooks onto the side of a bucket or paint scuttle, which keeps the brush accessible without it rolling off a board or ending up handle-deep in the tin. Small thing. Genuinely useful.
There is no bristle loss with this brush, which matters more than it sounds. Picking bristles out of a freshly painted surface or a wood treatment that is halfway to cured is not how anyone wants to spend their afternoon. The bristles are set firmly and stay that way.
Available in a Full Range of Sizes
Sizes run from 0.5 inch all the way up to 5 inch, so whether you need something small for detail work or a wider brush to move through a large area quickly, there is an option here. The 4 inch and 5 inch sizes are particularly good for exterior work where coverage speed matters. Smaller sizes suit joinery, fence paling ends, and anywhere you need a bit more control.
At £3.79 this is trade-priced for what it does. Keep a few different sizes in the van and you have most painting and treatment jobs covered without reaching for anything specialist.
Pro Tip: Synthetic bristles clean up faster than natural ones with water-based products, so rinse this brush out before the paint skins over and it will be ready to use again the same day.
This block brush covers a wide spread of everyday site and maintenance tasks. It is well suited to applying emulsion and masonry paint on interior and exterior walls, brushing wood treatments and preservatives onto fencing, decking, and structural timbers, and working paste onto surfaces prior to tiling or wallpapering. The stiff synthetic bristles make it a solid choice on rough or textured surfaces where a softer brush would struggle to get product into the surface properly.
Decorators, groundworkers, joiners, and general maintenance operatives will all find a use for it. It works with most standard water-based and solvent-based paints, pastes, and woodcare products, making it a genuinely useful brush to have in several sizes on the job.
Best For
- Interior and exterior painting
- Wood treatments and preservatives
- Masonry and render surfaces
- Paste application
- Rough and uneven surfaces
Works With
- Water-based emulsions
- Masonry paints
- Wood stains and treatments
- Wallpaper and tile pastes
- Solvent-based coatings
Key Features
- 100% synthetic bristles
- No bristle loss
- High paint load capacity
- Built-in bucket hook bracket
- Available in 0.5 inch to 5 inch sizes
Not suitable for: Not designed for fine finishing work where a softer bristle brush would give better results. Not recommended as a substitute for specialist brushes used with highly viscous epoxy or resin products.
Dip the bristles no more than halfway into the paint or paste to avoid overloading and drips. Work the brush in firm strokes across the surface, pressing slightly harder on rough or textured areas to ensure full coverage. Hook the bracket over the bucket edge when not actively brushing so the brush stays clean and accessible.
For wood treatments, work along the grain where possible and apply a second coat once the first has been absorbed. Rinse the brush thoroughly in clean water immediately after use with water-based products. For solvent-based products, use the appropriate solvent cleaner before the bristles stiffen up.
- Select the appropriate brush size for the job, wider for open surfaces, smaller for detail or edges
- Stir or mix the paint, paste, or treatment thoroughly before starting
- Dip the bristles to no more than half their length to control the load
- Apply with firm strokes, working product into the surface rather than just coating it
- Hook the bracket over the bucket or scuttle edge between strokes to keep the brush ready
- Clean immediately after use with water for water-based products or appropriate solvent for solvent-based products
Are the bristles suitable for use with solvent-based products?
Yes, the synthetic bristles are compatible with both water-based and solvent-based paints and treatments. Just clean the brush with the correct solvent cleaner after use rather than water, and do it promptly before the product has a chance to harden in the bristles.
Will the bucket hook fit a standard paint bucket or scuttle?
The bracket is designed to hook onto the rim of a standard paint bucket or scuttle and works with most common sizes used on site. It keeps the brush from sitting in the paint or resting on a dusty surface while you work.
The brush body features a solid synthetic bristle fill rated for high paint load capacity, set firmly to prevent bristle loss during application. Suitable for use across most standard paint and treatment types including water-based emulsions, masonry coatings, wood preservatives, and paste products. The integrated bucket hook is moulded into the handle for convenience during use.
| Bristle Material | 100% synthetic |
|---|---|
| Available Sizes | 0.5 inch, 1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch, 4 inch, 5 inch |
| Bristle Loss | None |
| Bucket Hook | Included |
| Suitable For | Interior and exterior paints, pastes, woodcare products and treatments |
Be the first to review “Multi-Purpose Block Brush”Cancel Reply
You may also like…

ProDec TROJAN Pro Synthetic Brush Set – 6 Piece
£9.90£11.88 EX VATINC VAT
TIMCO Mixed Paint Brush Set (5 pieces)
£9.81£11.77 EX VATINC VAT
Professional Synthetic Paint Brush Mixed Set (5 pieces)
£11.18£13.42 EX VATINC VAT
TIMCO Mixed Paint Brush Set (10 pieces)
£15.33£18.40 EX VATINC VAT
Related products

Contractors Disposable Mixed Paint Brush Set (5 pieces)
£1.79£2.15 EX VATINC VAT
Stanley Chalk Line & Blue Builders Chalk 30m
£6.74£8.09 EX VATINC VAT
ProDec 9 Inch Tiger Twin Medium Pile 4pc Roller Set
£4.49£5.39 EX VATINC VAT
Contractors Roller Frame & Tray Set 9″
£7.89£9.47 EX VATINC VAT

Reviews
There are no reviews yet.