TIMCO permanent marker pens with chisel tips for bold, clear marks on almost any surface. Water and UV resistant ink, quick drying, and 30% longer life than standard felt tip markers. Comes in a twin pack.
A decent permanent marker is one of those things you only notice when you haven’t got one. These TIMCO permanent marker pens are the chisel tip version, so you get a broad mark for labelling and lining out, or you can angle the tip for something a bit finer. The ink is water and UV resistant, which matters when you’re marking materials that are going outside or into dusty, wet conditions before they get used.
The free flow cartridge system is what sets these apart from a standard felt tip. The ink flow is more consistent, the colour stays vivid longer, and TIMCO’s own testing puts the lifespan at 30% above a typical reservoir-style marker. That might not sound dramatic, but when you’re going through markers regularly on site it adds up.
Where TIMCO Permanent Marker Pens Get Used on Site
These are genuine all-surface markers. They’ll write on cardboard, paper, plastic, glass, tile, metal, masonry and timber without skipping or fading. For a builder or fixer that covers just about every material you’ll handle in a day. Mark up cut lengths of pipe or timber, label boxes of fixings, write reference numbers on masonry, or mark up sheet material before cutting.
Quick Drying Ink
The ink dries fast enough that you’re not smearing it across your work or your glove two seconds after you’ve written something. On smooth surfaces like plastic or glass, give it a moment, but on absorbent surfaces like timber or cardboard it’s near-instant. Simple enough, and it’s exactly what you need when you’re moving quickly on site.
Sold as a twin pack at a price that makes it easy to keep one in the van and one in the toolbox. Black chisel tip, built for trade use.
Pro Tip: Chisel tip markers last longer if you store them horizontally rather than tip-down, as it prevents the ink pooling at the nib and drying it out prematurely.
These permanent marker pens are used across building, joinery, plumbing, electrical, and general site work wherever clear, lasting marks are needed. Common jobs include marking cut lengths on timber and pipe, labelling fixings, writing references on masonry or sheet material, and marking up glass or tile before cutting. They work equally well in a warehouse or workshop for stock labelling and box marking.
Best For
Marking cut lengths on timber, pipe and sheet material
Labelling fixings, boxes and site materials
Writing on masonry, tile and glass
General site and workshop marking
Compatible Surfaces
Timber and sheet material
Cardboard and paper
Plastic
Glass and tile
Metal
Masonry
Key Features
Chisel tip for broad or angled marks
Free flow cartridge technology
Water and UV resistant ink
Quick drying
30% longer life than standard felt tip markers
Twin pack
Not suitable for: Not suitable for use on surfaces that will be painted over where ink bleed-through could be an issue, such as bare plasterboard that is going straight to emulsion. The permanent ink will resist most water-based coats.
Remove the cap and mark directly onto the surface. Use the broad face of the chisel tip for clear, bold lines and the edge for finer detail. Replace the cap securely after use to prevent the tip drying out.
Remove the cap from the marker
Use the broad face of the chisel tip for wide, visible marks or angle the tip for a narrower line
Mark clearly onto the surface, applying light, consistent pressure
Allow a few seconds to dry on smooth surfaces such as plastic or glass before touching
Replace the cap firmly after use to preserve the tip and ink
Will these permanent marker pens write on wet or damp surfaces?
They perform best on dry surfaces. The ink is water resistant once dry, but writing onto a wet surface will reduce adhesion and the mark may not take properly. Wipe down damp materials before marking where possible.
Can the chisel tip be used for finer lines as well as broad marks?
Yes. Angling the tip onto its edge gives a noticeably finer line than using the flat face. It won't give you the precision of a fine liner, but it's useful when you need something slightly more controlled than a full broad stroke.
These markers use a free flow cartridge system rather than a traditional felt reservoir, which delivers more consistent ink output and extends usable life. The ink is formulated to be both water and UV resistant once dry, making marks suitable for outdoor or exposed conditions. Chisel tip nib allows variable line width depending on angle of use.
Brand
TIMCO
Tip Type
Chisel
Colour
Black
Ink Type
Permanent
Water Resistant
Yes
UV Resistant
Yes
Ink Delivery
Free flow cartridge
Pack Quantity
2
SKU
736222
Reviews
There are no reviews yet.
Be the first to review “Builders Permanent Markers – Chisel Tip – Black – 2 pack”Cancel Reply
Reviews
There are no reviews yet.