Thermal builders grip gloves for cold site work. Sold as a pair in Large (size 9) or X-Large (size 10). A grippy palm helps with handling tools, timber and fixings, and the thermal lining takes the edge off a frosty morning.
Available options and pricing for Thermal Builders Winter Grip Gloves, with quantity selectors and a running total
Size
SKU
Price
QTY
Total
Large Size 9 (QTY: 1 Pair)
THERMAL-L9
£0.99£1.19
—
X-Large Size 10 (QTY: 1 pair)
THERMAL-XL10
£0.99£1.19
—
Anyone who has tried to hold a spirit level at 7am in January knows the problem. Fingers stop working properly long before the job is done. These thermal builders grip gloves are made for exactly that situation: a warm lining to keep your hands usable, and a gripped palm so you are not dropping things when it counts.
They are sold as a single pair and come in two sizes, Large (size 9) and X-Large (size 10). At under a pound a pair, they are the sort of glove you can hand out to a gang without a budget meeting, and replace when they wear out without losing sleep over it.
Where Thermal Builders Grip Gloves Get Used
This style of glove earns its keep on outdoor and unheated work. Think scaffolding, roofing prep, bricklaying and blockwork, fencing, groundworks, and general labouring around a site. It also suits loading and unloading vans in the cold, which is the one job nobody volunteers for but everyone ends up doing.
The grip coating on the palm and fingers gives you a much better hold on cold, damp or slightly dusty materials than a bare glove would. Timber, plastic pipe, galvanised fixings and tool handles all tend to get slippery once the weather turns. A textured palm helps you keep hold without having to squeeze so hard that your hands cramp up.
Choosing the Right Size
Fit matters more than people think. A glove that is too loose slips and bunches up around the fingers, which defeats the point of having a grip. Too tight and it restricts movement and cuts circulation, which makes your hands colder, not warmer. Size 9 (Large) suits most average adult hands. Size 10 (X-Large) is the better choice for bigger hands or if you like a little room to wear a thin liner underneath.
Thermal Gloves for Everyday Site Work
These are a general purpose winter work glove. They are good for handling and carrying, light fixing work and keeping the chill off. The thermal lining is there for comfort in cold conditions, and the pair is flexible enough that you can still pick up a screw or work a tape measure without peeling them off every five minutes.
They are not a specialist cut resistant or chemical glove, so treat them as the everyday option for cold weather and keep a rated glove in the van for jobs that need one. For anything involving sharp edges, sheet metal or glass, use a glove with the appropriate cut rating instead.
Given the price, many trades buy these in quantity and keep a few pairs in the van, the toolbag and the site cabin. Somebody always forgets theirs, and it is rarely the person who owns the cabin.
If your gloves get wet through, swap them for a dry pair rather than carrying on. A damp glove loses its insulating value quickly, and wet and cold together is a bad combination for anyone working outside. Letting them dry out overnight somewhere warm, away from direct heat, will extend their life.
Pro Tip: Buy a few spare pairs and rotate them through the day, because a dry glove at lunchtime is worth far more than a damp one you have been wearing since 7am.
Cold weather site work is where these thermal builders grip gloves belong. They suit labouring, scaffolding, roofing prep, fencing, groundworks, brickwork and general handling of timber, pipe, fixings and tools. Handy for van loading on frosty mornings and for anyone working outdoors who needs warm hands without losing feel for the job.
Best For
Cold weather site work
General labouring and handling
Scaffolding and roofing prep
Fencing and groundworks
Loading and unloading vans
Works With
Timber and sheet materials
Plastic and metal pipe
Hand tools
Fixings and fastenings
Bricks and blocks
Key Features
Thermal lining for cold conditions
Gripped palm and fingers
Sold as a single pair
Available in Large (9) and X-Large (10)
Not suitable for: Not designed as a cut resistant, chemical resistant or heat resistant glove, so do not rely on them for handling sharp sheet metal, glass, solvents or hot work.
Pick the size that fits snugly without pinching, then wear them for general handling and carrying in cold conditions. Take them off if they get soaked through, and let them dry naturally before wearing them again.
Check the size marking and pick Large (9) or X-Large (10) to suit your hand.
Pull the gloves on fully so the fingers sit right to the tips with no slack.
Flex your fingers to confirm you can still grip tools and fixings comfortably.
Swap to a dry pair if the gloves get wet, as damp lining stops insulating.
Dry them naturally at room temperature, away from radiators and direct heat.
How many gloves come in each order?
Each listing is for one pair, which is one left and one right glove. Choose Large (size 9) or X-Large (size 10) from the size options before adding to your basket.
Which size should I choose?
Large (size 9) fits most average adult hands. Go for X-Large (size 10) if you have bigger hands or prefer a looser fit. A glove that is too tight restricts movement and can make your hands colder.
Are these gloves cut resistant?
No. These are thermal grip gloves intended for cold weather handling, not cut protection. For work involving blades, sharp sheet metal or glass, use a glove with a recognised cut resistance rating.
A thermal-lined work glove with a gripped palm and fingers, designed for general handling in cold outdoor conditions. The grip surface improves hold on tools and materials, while the lining adds warmth. It is a general purpose glove and does not carry cut, chemical or heat protection ratings.
Reviews
There are no reviews yet.