Defender 22m LED site festoon kit for 110v use. Includes 10 x 10W LED ES lamps with protective cages fitted, spaced 2.2m apart. Heat-free, glass-free, 8000 lumens total output. Ideal for construction sites, industrial units and temporary work areas.
The Defender 110v LED site festoon kit covers 22 metres of working area with a single run, making it one of the more practical ways to light a large site without messing around with multiple temporary fittings. Ten modules spaced 2.2m apart, each fitted with a 10W ES LED lamp and a protective cage, give you 8000 lumens of diffused, wide-spread light straight out of the box. If you’ve ever squinted through a halogen festoon at the end of a long shift, the difference is immediately noticeable.
Running at 110v, this is built for the kind of environments where 240v just isn’t the right call. Construction sites, groundworks, industrial units, tunnels, cellars — anywhere with a 110v supply and a need for reliable, consistent lighting overhead. The 180-degree light spread means you’re not just lighting a narrow path; you’re washing light across the whole work area, which makes a real difference when you need to see what you’re actually doing.
Why the Defender LED Festoon Kit Works on Site
The LED ES lamps run cool. No hot glass to worry about, no risk of burns if you catch a fitting while you’re working overhead. The diffused lens takes the edge off glare, which matters on a long shift when you’re looking up repeatedly. Cages are already fitted, so there’s nothing to assemble before you can string it up. Hanging hooks are available separately if you need them, which is worth knowing before your first delivery arrives.
Traditional-style festoons like this have been a site staple for decades, and the reason is straightforward: they’re simple to run out, simple to move, and simple to pack away. Replacing the old incandescent versions with LED means the running cost drops considerably, and the heat output drops to near nothing. At 100W total draw across ten lamps, this kit is drawing less than some single-lamp work lights while illuminating a significantly larger area.
Whether you’re lighting a groundworks trench, a barn conversion, or a factory unit during a refit, the Defender 110v LED site festoon kit handles it without fuss.
Pro Tip: Always hang the festoon with a slight droop between each fixing point rather than pulling it taut — a taut cable run puts stress on the lamp connections over time, especially if the string gets knocked or snagged during work.
Site festoon kits like this are used wherever temporary overhead lighting is needed across a wide area. Common applications include construction sites, groundwork trenches, scaffold deck lighting, basement and cellar conversions, agricultural buildings, factory refits and maintenance shutdowns. They work well in any space where a 110v supply is available and fixed lighting hasn't been installed yet.
This kit is particularly useful on larger projects where a single work light doesn't cover enough ground, and where stringing a festoon across the full work area is quicker than repositioning tripod lights every time the job moves on.
Best For
Construction site general lighting
Groundworks and trench lighting
Scaffold deck illumination
Factory and warehouse maintenance shutdowns
Agricultural buildings
Basement and cellar conversions
Compatible With
110v site supply (CTE transformer)
ES (E27) lamp holders
Standard site distribution boards
Separately available hanging hooks
Key Specifications
Total length: 22 metres
Modules: 10 x spaced 2.2m apart
Lamp type: LED ES 10W per module
Total output: 100W, 8000 lumens
Light spread: 180 degrees
Voltage: 110v
Heat-free and glass-free
Diffused lens for reduced glare
Not suitable for: Not suitable for 240v supplies — this is a 110v product designed for site transformer use only. Not intended for permanent installation or outdoor use in exposed wet conditions beyond typical site environments.
Run the festoon out along the intended route before hanging it, checking there are no kinks or twists in the cable. Hang using the integral loops at each module, using hooks or ties at a height that gives good spread without putting the lamps at head height. Connect to your 110v supply once the string is fully positioned.
The diffused lamps produce no significant heat, so they can be positioned closer to materials and sheeting than older halogen versions. If you need more coverage, Defender festoons can typically be daisy-chained or extended — check your transformer capacity before doing so, as total draw needs to stay within the rated output.
Check your 110v transformer output is sufficient for the kit's 100W total draw before connecting
Lay the festoon string out along the full route to check for any knots or cable damage before hanging
Hang each module loop from a hook, nail, or tie point, keeping a gentle droop between fixing points rather than pulling the cable tight
Position lamps clear of flammable sheeting or materials, though heat output is minimal compared to halogen equivalents
Connect the plug to your 110v supply or site distribution board
Test each lamp before starting work — if a lamp is out, replace with a compatible ES LED or incandescent lamp at the correct voltage
Can I replace individual lamps if one fails?
Yes. The lamps are standard ES (E27) fitting, so replacements are widely available. Make sure any replacement is rated for 110v — standard 240v ES bulbs will not work correctly on a 110v supply.
Are the cages removable, or are they permanently fixed to the lamp holders?
The cages are fitted to the lamp holders as part of the kit design. They're there to protect the lamps from knocks on site. Removing them would leave the glass diffuser exposed, which rather defeats the point.
Can I connect two festoon kits together to cover a longer area?
It's possible to extend coverage by daisy-chaining kits, but you must check your transformer's rated output first. Each 22m kit draws 100W total, so two kits require at least a 200W capacity — and you'll want headroom above that for a safe, stable supply.
The Defender LED site festoon kit uses ES-fitting LED lamps rated at 10W each, producing 800 lumens per lamp across a 180-degree spread. The diffused polycarbonate lens housing is glass-free and runs at a low surface temperature, reducing burn and fire risk on site. Total system draw is 100W at 110v across ten modules. The cable is rated for site use at low voltage, with moulded hanging loops at each module position.
Voltage
110v
Total Cable Length
22 metres
Number of Modules
10
Module Spacing
2.2 metres
Lamp Type
LED ES (E27)
Lamp Wattage
10W per lamp
Total Power Draw
100W
Total Lumen Output
8000 lumens
Light Spread
180 degrees
Lens Type
Diffused
Glass Content
Glass-free
SKU
E89811
Reviews
There are no reviews yet.
Be the first to review “Defender 22m 1000w Led ES Site Festoon Kit C/W Led Lamps & Cages – 110v”Cancel Reply
Reviews
There are no reviews yet.