Reisser Cutter Screws – Tubs

Name: Reisser Cutter Screw Tubs | Insane Bulk Discounts
Brand: Reisser
SKU: CUT-TUB
Availability: InStock

From £19.39£23.27 EX VATINC VAT

Reisser Cutter Screws in trade tubs. High-performance woodscrews with self-countersinking tip, yellow tropicalised coating for rust resistance, and waxed thread for fast, accurate driving into softwood, chipboard and most hardwood. Multiple sizes available.

Size	QTY	Price
3.5 x 16mm	2500	£19.39£23.27
3.5 x 20mm	2200	£19.39£23.27
3.5 x 25mm	2000	£19.39£23.27
3.5 x 30mm	1600	£19.39£23.27
3.5 x 35mm	1400	£19.39£23.27
3.5 x 40mm	1250	£19.39£23.27
3.5 x 50mm	950	£19.39£23.27
4.0 x 25mm	1600	£19.39£23.27
4.0 x 30mm	1500	£19.39£23.27
4.0 x 40mm	1200	£19.39£23.27
4.0 x 50mm	900	£19.39£23.27
4.0 x 60mm	700	£19.39£23.27
4.0 x 70mm	650	£19.39£23.27
4.0 x 80mm	500	£19.39£23.27
4.5 x 40mm	800	£19.39£23.27
4.5 x 50mm	700	£19.39£23.27
4.5 x 60mm	600	£19.39£23.27
4.5 x 70mm	500	£19.39£23.27
4.5 x 80mm	450	£19.39£23.27
5.0 x 30mm	800	£19.39£23.27
5.0 x 40mm	725	£19.39£23.27
5.0 x 50mm	600	£19.39£23.27
5.0 x 60mm	500	£19.39£23.27
5.0 x 70mm	450	£19.39£23.27
5.0 x 80mm	400	£19.39£23.27
5.0 x 90mm	300	£19.39£23.27
5.0 x 100mm	250	£19.39£23.27
6.0 x 100mm	220	£19.39£23.27

Size

Box Quantity

Clear

Credit Plans Available

Description

Reisser Cutter Screw tubs are the go-to choice for tradespeople who get through screws at volume. Whether you’re fitting timber frames, fixing sheet materials, or working through a full first fix, having these in a tub rather than a box of strips makes life considerably easier. The focus keyword here is obvious to anyone who’s used them: reisser cutter screw tubs are what most joiners and carpenters reach for when they want a screw that just works, every time.

The 25-degree needle point lets the screw start immediately without wandering, which matters when you’re driving hundreds a day. No pre-drilling needed in most timber applications, and the self-countersinking head pulls flush cleanly without surface damage. The reinforced collar reduces cam-out by giving the Pozi bit more to grip, which saves both screws and your patience.

Two patented anti-split slots reduce the risk of timber cracking close to the edge, and the ribs and tucks on the shank help the screw seat flush without tearing the surface. The waxed thread cuts through timber and chipboard smoothly, reducing the load on your driver and helping you keep a consistent pace through long runs.

Why Reisser Cutter Screw Tubs Work for Trade Use

The yellow tropicalised coating gives up to 20 times more rust resistance than standard zinc-plated woodscrews. That’s not just useful on outdoor or exposed applications. It means screws left in an open tub on a damp site aren’t going to corrode in the thread and cause problems on the gun.

Tubs are available across a wide range of sizes from 3.5mm up to 6.0mm diameter, and in lengths to suit most common fixing depths. Selected sizes come complete with two 25mm Torsion bits, which is a handy touch when you’re mid-job and need a spare.

Pro Tip: When driving Reisser Cutters into the end grain of timber, reduce your clutch setting slightly to avoid over-driving, the self-countersinking head can pull deeper than expected in softer end grain where there is less resistance.

Applications

Reisser Cutter Screws are used across timber framing, first and second fix joinery, stud work, flooring, decking, and general carcassing. They perform well in softwood, MDF, chipboard, and most hardwood without the need for pre-drilling. Fitters, carpenters, joiners, and site labourers all use them because they drive cleanly and seat flush without fuss. The range of available sizes means there is a Cutter screw suited to almost any standard timber or board fixing task on a typical construction or fit-out project.

Best For

Timber frame construction
First and second fix joinery
Stud partitioning
Flooring and decking
Carcassing and shopfitting
General wood-to-wood fixing

Compatible Materials

Softwood
Chipboard and MDF
Most hardwoods
Plywood
Sheet boarding materials

Key Features

Yellow tropicalised coating, up to 20x rust resistance
25-degree needle point for immediate start
Self-countersinking, no counter-boring needed
Anti-split slots reduce edge splitting
Waxed thread for smooth, fast driving
Reinforced collar reduces cam-out
Selected sizes include 2 x Torsion bits

Not suitable for: Not suitable for structural metal connections or masonry applications. Not recommended for permanent external use in fully exposed conditions where A4 stainless fixings would be the appropriate choice.

Usage

Load the correct Pozi bit into your driver, or use the included Torsion bit where supplied. Set the clutch to suit the timber density and the depth you need. The needle point self-starts cleanly, so no pilot hole is needed in most softwood and sheet material applications. Drive at a steady speed and let the clutch do the work to avoid over-driving.

For close-to-edge fixing, position carefully and use the anti-split feature to your advantage by keeping the screw square to the grain. In denser hardwoods, a pilot hole will help reduce splitting and keep the driving torque manageable, particularly in longer lengths.

Select the correct screw length for your fixing, as a guide the screw should penetrate the receiving material by at least two thirds of the total screw length
Fit a Pozi 2 bit to your driver, or use the included 25mm Torsion bit if supplied with the tub
Set your driver clutch to match the timber density, lower settings for sheet materials, higher for dense hardwood
Position the screw point on the mark and start the driver at low speed to locate the needle point cleanly
Drive at a controlled speed and allow the clutch to disengage when the head seats flush
In hardwoods or close-to-edge positions, drill a pilot hole first to prevent splitting and reduce cam-out risk

FAQs

Do I need to pre-drill when using Reisser Cutter Screws in softwood or chipboard?

No. The 25-degree needle point is designed to start and drive without a pilot hole in softwood, chipboard, MDF, and most sheet materials. In dense hardwoods or close to timber edges, a pilot hole is still advisable to prevent splitting and reduce driving resistance.

What does the yellow tropicalised coating actually mean in practice?

It means the screws have significantly better rust resistance than standard zinc-plated woodscrews, up to 20 times more according to Reisser. They are suitable for use in general internal and sheltered external applications, though for fully exposed outdoor use you would want stainless steel fixings instead.

Technical Information

Reisser Cutter Screws are manufactured from carbon steel with a yellow tropicalised surface treatment that provides substantially higher corrosion resistance than conventional zinc plating. The countersunk head is designed for use with a Pozi 2 driver bit. The shank incorporates patented anti-split slots, ribs and tucks for flush seating, and a waxed thread to minimise driving torque. The reinforced collar provides positive bit engagement and reduces the cam-out common with standard woodscrews.

Material	Carbon steel
Coating	Yellow tropicalised
Head Type	Countersunk
Drive Type	Pozi 2
Diameter Range	3.5mm to 6.0mm
Length Range	16mm to 100mm
Thread Type	Waxed, self-countersinking
Point	25-degree needle point
Anti-Split	2 patented anti-split slots
Included (selected sizes)	2 x 25mm Torsion bits

Additional information

Weight	N/A
Size	3.5 x 16mm, 3.5 x 20mm, 3.5 x 25mm, 3.5 x 30mm, 3.5 x 40mm, 3.5 x 50mm, 4.0 x 25mm, 4.0 x 30mm, 4.0 x 40mm, 4.0 x 50mm, 4.0 x 60mm, 4.0 x 70mm, 4.5 x 40mm, 4.5 x 50mm, 4.5 x 60mm, 4.5 x 70mm, 4.5 x 80mm, 5.0 x 100mm, 5.0 x 30mm, 5.0 x 40mm, 5.0 x 50mm, 5.0 x 60mm, 5.0 x 70mm, 5.0 x 80mm, 5.0 x 90mm, 6.0 x 100mm, 3.5 x 16 C/W 2 x 25 TORSION BITS, 3.5 x 20 C/W 2 x 25 TORSION BITS, 3.5 x 25 C/W 2 x 25 TORSION BITS, 3.5 x 30 C/W 2 x 25 TORSION BITS, 3.5 x 35 C/W 2 x 25 TORSION BITS, 3.5 x 35mm, 3.5 x 40 C/W 2 x 25 TORSION BITS, 3.5 x 50 C/W 2 x 25 TORSION BITS, 4.0 x 80mm, REISSER CUTTER TUBS 4.0 x 25 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.0 x 30 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.0 x 60 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.0 x 70 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.0 x 80 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.5 x 40 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.5 x 50 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.5 x 60 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.5 x 70 C/W 2 x 25 TORSION BITS, REISSER CUTTER TUBS 4.5 x 80 C/W 2 x 25 TORSION BITS
Box Quantity	1250, 1500, 2000, 250, 300, 400, 500, 1200, 1400, 1600, 220, 2200, 2500, 450, 600, 650, 700, 725, 800, 900, 950

Reviews (0)