A textured, waterproof abrasive pad that cleans and preps without splintering or leaving metal fragments behind. A practical alternative to steel wool for plumbing and general prep work. Available in green general purpose and maroon medium coarse grades.
Size
Price
QTY
pack 5 maroon
£4.95£5.94
pack 5 green
£4.95£5.94
Cleantex mini pads are a no-nonsense abrasive that gets the job done without the usual headaches that come with steel wool. No splinters working into your fingers, no metal fragments left behind on pipework, no rust staining everything they touch the moment they get wet. Just a durable, textured pad that cuts through oxidation, light scale and surface grime on copper, brass and similar materials — reliably and without fuss.
They come in two grades. Green is your general purpose option, good for cleaning copper pipe ends and fittings before soldering, light surface prep, and anywhere you need a bit of bite without going too aggressive. Maroon is medium coarse, suited to heavier tarnishing, stubborn residue, or surfaces that need a more assertive approach before you crack on with the next step. Both grades share the same metal-free construction, which matters when you are working around plumbing components that do not appreciate ferrous contamination.
What Makes Cleantex Mini Pads Worth Keeping in the Van
The waterproof, washable design means these pads last considerably longer than steel wool alternatives. Steel wool does what it says, right up until it starts rusting in your toolbag, which — let’s be honest — is usually about twenty minutes after you open the packet. Cleantex pads sidestep that entirely. Rinse them off, leave them to dry, and they are ready to go again. That kind of longevity makes them genuinely good value across a working week, not just a single job.
The textured surface gives decent abrasive action without being so harsh that it damages softer metals. Copper pipe prep is probably the most common use on site, but these pads pull their weight anywhere a controlled abrasive is needed. They are compact enough to reach into tight spots and light enough to use one-handed, which is exactly what you want when the other hand is holding the pipe steady.
Sold in packs of five, they are a straightforward addition to any plumber’s consumables order.
Pro Tip: When prepping copper pipe ends for soldering, work the pad in a circular motion around the full circumference rather than back and forth, so you get even abrasion and do not leave directional scratches that can affect solder flow.
Cleantex mini pads are used primarily in plumbing for cleaning and deburring copper pipe ends and fittings ahead of soldering. They are also used for general surface prep on brass valves, chrome fittings and other non-ferrous metals where steel wool would leave damaging residue. Beyond plumbing, they turn up in general maintenance work anywhere a controlled abrasive is needed on a small area without the risk of metal contamination.
Best For
Copper pipe prep before soldering
Cleaning brass and chrome fittings
Light surface abrasion on non-ferrous metals
General purpose cleaning and prep
Tight or awkward access areas
Available In
Green: General Purpose Grade
Maroon: Medium Coarse Grade
Pack of 5 per colour
Key Features
Metal-free construction
Waterproof and washable
Non-splintering
Reusable
Alternative to steel wool
Not suitable for: Not intended for heavy material removal or use on painted surfaces where abrasion would cause damage. Not a substitute for purpose-made wire brushes on heavily corroded or scaled pipework.
Wrap or fold the pad to a comfortable size for the area you are working on. Apply moderate pressure and work in a circular motion on pipe ends or fitting surfaces until the metal is clean and bright. Rinse the pad after use and allow to dry before storing.
Select the appropriate grade: green for general prep, maroon for heavier tarnishing or stubborn residue
Fold or trim the pad to a workable size if needed for tight access
Apply moderate hand pressure and work in circular motions around the pipe end or fitting surface
Continue until the surface is clean, bright and free from oxidation or residue
Wipe the surface with a clean cloth before applying flux or proceeding with the next stage
Rinse the pad under water after use and leave to dry for reuse
What is the difference between the green and maroon Cleantex mini pads?
Green is a general purpose grade, suitable for routine copper pipe prep and light surface cleaning. Maroon is medium coarse, better suited to heavier tarnishing or more stubborn surface residue where the green grade would take too long to cut through.
Can these pads be reused or are they single use?
They are reusable. The waterproof, washable construction means you can rinse them after use and they will dry ready for the next job. They hold up considerably better than steel wool in that respect.
Why use Cleantex pads instead of steel wool for plumbing prep?
Steel wool leaves metal fragments and rust residue behind, which can contaminate pipe joints and fittings. Cleantex pads are metal-free, so there is no risk of ferrous contamination, and they do not splinter into your fingers mid-job either.
Cleantex mini pads are constructed from a synthetic, metal-free abrasive material that is both waterproof and washable. The textured surface provides consistent abrasive action without the splintering or rust contamination associated with steel wool. The two available grades offer different levels of abrasive cut suited to general prep work and medium coarse applications respectively.
Grade (Green)
General Purpose
Grade (Maroon)
Medium Coarse
Material
Synthetic metal-free abrasive
Waterproof
Yes
Washable
Yes
Pack Size
5 pads
Weight
N/A
Size
pack 5 green, pack 5 maroon
Box Quantity
1
Colour
Green, Maroon
Reviews
There are no reviews yet.
Be the first to review “Cleantex Mini Pads”Cancel Reply
Reviews
There are no reviews yet.