Reisser r2 screws csk – full thread – yellow

Reisser R2 full thread screws have been a staple on site for over three decades, and there’s a straightforward reason for that: they work, consistently, across a huge range of timbers and board materials. The full thread runs the entire length of the shank, giving excellent pull-out resistance and a firm, reliable fix — particularly useful in thinner materials where a part-thread screw just won’t get the same grip.

The 25-degree needle point is sharp enough to self-start in most timbers without needing to pilot drill first. That saves time, and on a day where you’re running hundreds of fixings, it adds up. The wide, deep thread profile combined with Reisser’s own lubrication reduces driving resistance by up to 40%, so you’re not wrestling your driver on every screw. Less cam-out, less effort, fewer stripped heads.

Why the R2 Full Thread Stands Out

The steel is specially hardened for maximum tensile and torsional strength, so the screw holds its shape under load and through the drive. The yellow tropicalised coating offers better corrosion resistance than a standard bright zinc plated finish, which matters if the work is going somewhere that sees moisture — inside a garage, near external walls, or anywhere with humidity.

The deep reinforced pozi recess is designed to keep the driver bit seated properly. It’s a small detail, but it makes a noticeable difference when you’re driving at speed. Fewer slips, cleaner finishes, and a stronger connection between the bit and the head where it matters most.

Reisser R2 full thread screws are available in a wide range of sizes from 3.0 x 10mm up to 6.0 x 60mm, and in pack sizes that suit both smaller jobs and high-volume trade use. Whether you’re picking up a consumer pack or buying in bulk by the thousand, the quality is consistent throughout.