TIMCO D3 Wood Adhesive – Internal

Name: Everbuild 502 Wood Adhesive D3 Weatherproof | Fast UK Trade Delivery
Brand: timco
SKU: PVAGLUE-1
Availability: InStock

From £3.19£3.83 EX VATINC VAT

Available options and pricing for TIMCO D3 Wood Adhesive - Internal, with quantity selectors and a running total
Size	SKU	Price	Total
500ml	247458	£3.19£3.83	—
1 litre	247258	£4.89£5.87	—
5 litre	247513	£17.85£21.42	—

Size

Clear

Credit Plans Available

Applications

Everbuild 502 is used across joinery, carpentry, cabinet making and furniture assembly. It suits both site work and workshop conditions, handling softwoods and hardwoods with equal reliability. You will find it used on door frames, stair components, worktop joints, fitted furniture carcasses and general timber repair work. External applications such as garden furniture and exterior window boards are well within its capability, provided joints are not permanently exposed to standing water.

Best For

General joinery and carpentry
Cabinet making and furniture assembly
Stair and door frame repairs
Worktop and fitted furniture installation
External timber joinery (non-submerged)

Compatible Surfaces

Softwood timber
Hardwood timber
MDF and engineered wood boards
Plywood and OSB

Key Properties

EN 204 D3 weatherproof rated
Conforms to BS 14256 creep resistance
Initial set in approximately 10 minutes
Dries clear
Impact-resistant bond
Water-based, easy clean-up

Not suitable for: Not suitable for continuous immersion or fully submerged joints. This is a D3 adhesive, not D4, so it is not appropriate for boats or applications where the joint will be permanently wet.

Usage

Apply Everbuild 502 directly from the bottle to both mating surfaces for best adhesion. Bring the pieces together, align carefully, and clamp with sufficient pressure to close the joint fully. Wipe away any squeeze-out with a damp cloth before it dries.

Initial set takes around 10 minutes, but leave joints clamped for at least an hour before handling under load. Full cure takes longer, so avoid stressing the joint until it has had time to develop full strength, especially in cooler temperatures where cure time extends.

Ensure all surfaces are clean, dry and free from dust, grease or old adhesive residue
Apply a thin, even layer of Everbuild 502 to both mating surfaces
Bring the pieces together and align accurately before the glue begins to set
Apply even clamping pressure across the full length of the joint
Wipe away any squeeze-out immediately with a damp cloth
Leave clamped for a minimum of one hour before removing clamps
Allow full cure before loading the joint, particularly in cold or damp conditions

FAQs

What does the D3 rating mean for Everbuild 502?

D3 is the EN 204 classification for load-bearing wood adhesives suitable for high-humidity and external use where joints are not continuously submerged. It is the standard rating for exterior joinery applications and is appropriate for most outdoor timber work. D4 is the rating above it, required for permanently wet or submerged conditions.

How long does Everbuild 502 take to set and cure fully?

Initial set is around 10 minutes, which gives you a short working window to position and clamp your joint. Clamps should stay on for at least an hour. Full cure takes longer, typically several hours, and will extend in cold weather. Do not load the joint heavily until it has cured fully.

Will Everbuild 502 wood adhesive show through a painted or stained finish?

It dries clear, so squeeze-out that is wiped away promptly will not leave a visible residue. If glue dries on the surface before you remove it, it can create a barrier that prevents stain from penetrating evenly, so it is worth cleaning up while it is still wet.

Technical Information

Everbuild 502 is a water-based, resin-modified PVA wood adhesive formulated to meet EN 204 D3 and BS 14256 standards for creep resistance. The D3 classification confirms suitability for structural and semi-structural timber applications in environments subject to short-term water exposure and high humidity. The cured bond has high impact resistance and typically exceeds the tensile strength of the surrounding timber.

Product Type	PVA Wood Adhesive
Classification	EN 204 D3
Standard	BS 14256 (Creep Resistance)
Initial Set Time	Approximately 10 minutes
Finish	Dries clear
Application	Internal and external (non-submerged)
Available Sizes	1 litre, 5 litre
Base	Water-based resin

Additional information

Weight	N/A
Size	1 litre, 5 litre, 500ml
Box Quantity	1
Product Type	PVA Wood Glue

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TIMCO D3 Wood Adhesive – Internal”