A 200m² static-charged polythene dust sheet roll that clings to surfaces without tape or adhesive. Attracts dust and overspray during decorating and renovation work. Includes a free sheet cutter.
The Timco Protective Cling Sheet is a 50m x 4m roll of static-charged polythene sheeting designed to protect floors, furniture and surfaces during decorating, plastering and general building works. Unlike a standard dust sheet, it clings to surfaces using static charge alone — no tape, no adhesive, no residue left behind when you peel it off. At 200m² per roll, there is plenty of material to cover a significant area before you need to reach for another.
The static charge does more than just hold the sheet in place. It actively attracts airborne dust particles and paint overspray, pulling them onto the sheet rather than letting them settle elsewhere. If you have ever come back after a day’s spraying to find a fine mist of paint on everything you thought you had covered, you will appreciate why that matters. Regular poly sheets let particles travel underneath; this one works against that.
Where the Protective Cling Sheet Earns Its Keep
This kind of sheet comes into its own on decorating and renovation sites where multiple trades are working in sequence. Plasterers, painters, floor layers — anyone moving through a space that has just been prepped — benefits from a surface covering that stays put without needing to be taped down every morning and re-taped every time someone walks across it. It is water resistant too, so splashes from emulsion, plaster water and general site mess wipe off rather than soak through.
The roll format means you can cut the sheet to the length you need on the job, and a free sheet cutter is included in the box so you are not hunting round for a Stanley knife. Cut what you need, lay it, cling it down, and get on with the work.
Practical Protection Without the Faff
There is a certain type of dust sheet that spends more time being repositioned than actually protecting anything. This is not that. The cling action keeps it in contact with the surface even in busier environments, and because there is no adhesive involved, delicate surfaces such as freshly finished floors or polished furniture come away clean. Peel it back at the end of the job and there is nothing left behind except the surface in the same condition you found it.
Supplied as a single box containing one 50m x 4m roll with a sheet cutter included. Suitable for use across decorating, refurbishment and general building works.
Pro Tip: Roll the sheet out slightly ahead of where you are working and press down firmly with your boot as you go — this activates the static cling faster than smoothing by hand and reduces lifting on high-traffic areas.
The protective cling sheet is used wherever surfaces need temporary protection during decorating, renovation or building works. It suits floor protection in rooms being painted or plastered, covering furniture and fixtures left in situ during refurbishment, and protecting finished surfaces in areas where other trades are still working. Painters, decorators, plasterers and general builders all reach for this type of product when they need reliable coverage without the time cost of taping down traditional dust sheets on every job.
Best For
Floor protection during decorating
Covering furniture and fixtures in situ
Dust and overspray control
Multi-trade renovation sites
Plastering and painting works
Compatible Surfaces
Hardwood and laminate floors
Carpet
Tiles
Polished and delicate surfaces
Furniture and worktops
Key Features
Static cling — no tape or adhesive required
Attracts airborne dust and overspray
Water resistant polythene construction
200m² coverage per roll
Free sheet cutter included
No adhesive residue on removal
Not suitable for: Not suitable as a long-term weatherproof covering or for use outdoors where wind will break the static cling. Not intended for use on very rough or heavily textured surfaces where cling contact may be inconsistent.
Unroll the sheet across the surface to be protected, pressing down firmly as you go to activate the static charge and encourage cling. Work progressively along the surface rather than rolling out a large section and trying to smooth it back. On floors, a firm pass underfoot is enough to bed it in. On furniture or vertical surfaces, smooth by hand with even pressure.
Cut to your required length using the included sheet cutter. At the end of the job, peel back carefully and dispose of or fold for reuse if the sheet is still in reasonable condition. No adhesive means no surface damage on removal.
Clear the surface of loose debris before laying the sheet
Begin unrolling at one end of the area to be covered
Press the sheet down firmly as you unroll — foot pressure on floors, firm hand pressure on other surfaces
Cut to length using the included sheet cutter
Overlap sheets by at least 100mm where full coverage is needed across wider areas
Peel back carefully from one edge when the work is complete
Does the cling sheet leave any residue when removed?
No. The cling action is purely static charge with no adhesive involved, so there is nothing left on the surface when you peel it back. It is safe to use on finished floors, polished surfaces and furniture without risk of marking.
How much area does one roll cover?
Each roll is 50m long by 4m wide, giving 200m² of coverage per roll. That is enough to cover the floors of several average-sized rooms, or a much larger area if you are using it to cover furniture and fixtures rather than floor-to-floor.
Can the sheet be repositioned once laid?
Yes, within reason. The static cling is strong enough to hold the sheet in place during normal site activity, but you can lift and reposition it without tearing. Once repositioned, press it back down firmly to reactivate the cling.
Constructed from polythene film with a built-in static charge that provides cling without adhesive. Water resistant across its surface, making it suitable for environments where paint splashes, plaster water and general wet mess are present. The 50m x 4m format gives 200m² of coverage per roll at a manageable weight and roll diameter for site use.
Roll Length
50m
Roll Width
4m
Coverage
200m²
Material
Static-charged polythene
Water Resistant
Yes
Adhesive
None — static cling only
Included Accessories
Free sheet cutter
SKU
PCS504
Reviews
There are no reviews yet.
Be the first to review “Protective Cling Sheet”Cancel Reply
Reviews
There are no reviews yet.