The 3M Aura 9332+ is an FFP3 valved disposable respirator with a three-panel fold-flat design. Low-resistance filtration, Cool Flow Valve, and individual sealed packaging. Certified to EN 149:2001 + A1:2009. Red headstraps for easy identification.
Trade QTY discounts — the more you buy, the more you save
Quantity
Discount
You Save
Price/unit
Buy 10 – 119
£0.10£0.12
14.5% off
£0.59£0.71
Buy 120 – 239
£0.20£0.24
29% off
£0.49£0.59
Buy 240+
£0.30£0.36
43.5% off
£0.39£0.47
Discount applies across all variants of this product.
The 3M Aura FFP3 valved mask is one of the most widely trusted disposable respirators in the trade. The 9332+ sits at the top of the disposable mask hierarchy, offering FFP3-rated protection against harmful dusts, mists, aerosols, and biological agents at concentrations up to 20 times the workplace exposure limit. That covers a lot of ground on site — from silica dust and wood dust through to fine chemical mists and more hazardous biological environments.
What sets the Aura apart from cheaper flat-fold masks is the three-panel design. Most flat-folds collapse against your face when you breathe in, which is uncomfortable and restricts movement. The sculpted three-panel construction creates an internal space that holds its shape, so you can talk, move around, and generally get on with the job without feeling like you’re breathing through a wet cloth. The upper panel follows the contour of your face closely, improving the seal, and the embossed profile at the bridge helps reduce eyewear fogging — which anyone who has ever tried to use safety specs with a badly fitting mask will appreciate.
3M Aura 9332+ Cool Flow Valve and Breathability
The Cool Flow exhalation valve is the other headline feature here. In warm conditions or during physical work, heat and moisture build up inside the mask quickly. The valve lets exhaled air escape efficiently, which reduces that clammy, uncomfortable feeling and helps you keep it on longer. Comfort drives compliance, as they say — a mask in your pocket protects nobody.
Breathing resistance is also noticeably low for an FFP3 mask. The filter technology keeps inhalation effort manageable even during sustained physical work. These masks have also passed the Dolomite clogging test, which means the filter maintains better breathing resistance as it loads up with particulate over a shift. Each mask comes individually sealed in a polybag with user information printed on it, keeping them hygienic until the moment you need them. Red headstraps make the FFP3 rating immediately obvious at a glance — useful where multiple mask grades are in use on the same site.
Rated NR, meaning single shift use only. Not intended for extended or multi-shift reuse.
Pro Tip: When fitting the 9332+, use both hands to mould the nose clip firmly after pulling the straps on, then do a quick positive and negative pressure seal check before entering the hazard area. A poor nose clip fit is the most common cause of protection loss with fold-flat masks.
The 3M Aura 9332+ is used wherever the highest level of disposable respiratory protection is needed. On construction sites that means silica dust from cutting concrete, brick, or stone, as well as wood dust, insulation fibres, and fine plaster particulate. Demolition work, refurbishment in older buildings, and grinding operations are all typical use cases.
Beyond construction, these masks are used in healthcare, laboratory environments, pharmaceutical production, and any setting where biological agents or fine aerosols pose a risk. The FFP3 rating makes them suitable where lower-rated masks such as FFP2 or FFP1 would not meet the required level of protection.
Best For
Silica and stone dust
Fine wood and MDF dust
Insulation fibres
Chemical mists and aerosols
Biological hazard environments
Healthcare and laboratory settings
Demolition and refurbishment work
Key Features
FFP3 rated protection up to 20x WEL
3-panel fold-flat design
3M Cool Flow exhalation valve
Low breathing resistance filter
Dolomite clogging test passed (D rating)
Individually sealed polybag packaging
Red headstraps for FFP3 identification
Sculpted upper panel with chin tab
Key Specifications
Protection class: FFP3 NR D
Standard: EN 149:2001 + A1:2009
Valve: Cool Flow exhalation valve
Use: Single shift, non-reusable
Packaging: Individually sealed polybag
Headstrap colour: Red
Not suitable for: Not suitable for reuse across multiple shifts. Not designed for gas or vapour protection. These masks should not be used as a substitute for supplied-air or powered air-purifying respirators where the exposure concentration exceeds 20 times the WEL.
Fit the mask by opening the fold, cupping it in one hand and placing it over your nose and chin. Pull the lower headstrap over your head first, positioning it at the back of the neck, then the upper strap above the ears. Once on, use both hands to press and mould the nose clip down the bridge of your nose. Do not pinch it from one side.
Perform a fit check before entering the hazard area. Cover the valve and exhale gently — the mask should puff out slightly without air escaping around the edges. Adjust the nose clip or straps if needed. Dispose of the mask after a single shift or sooner if it becomes damaged, soiled, or breathing resistance noticeably increases.
Remove the mask from its individual sealed polybag immediately before use
Open the fold and hold the mask in one hand with the straps hanging free
Position the mask over your nose and chin and pull the lower strap over the back of your neck
Pull the upper strap over your head and position it above your ears
Mould the nose clip firmly using both index fingers, working from the centre outward
Perform a positive pressure seal check by covering the exhalation valve and exhaling gently
Adjust nose clip or strap position if any air escapes around the seal
Dispose of the mask after a single shift or when it is damaged, soiled, or breathing becomes laboured
What is the difference between FFP2 and FFP3, and when do I need FFP3?
FFP2 masks filter at least 94% of airborne particles and protect up to 10 times the workplace exposure limit. FFP3 masks filter at least 99% of particles and protect up to 20 times the WEL. You need FFP3 where the hazard level is higher, such as silica dust from dry cutting, fine wood dust, certain biological agents, or any environment where your risk assessment requires the highest level of disposable respiratory protection.
Can I reuse the 3M Aura 9332+ across multiple days?
No. The 9332+ is rated NR, which stands for non-reusable, and is intended for single shift use only. Once a shift is complete, or if the mask is damaged, wet, soiled, or noticeably harder to breathe through, it should be disposed of. Attempting to reuse it risks compromised filtration and a degraded seal.
The 3M Aura 9332+ is a fold-flat particulate respirator constructed with a multi-layer filter media designed to achieve FFP3 classification under EN 149:2001 + A1:2009. The three-panel construction uses a sculpted upper panel and chin tab to maintain consistent facial conformity across a range of face shapes. The Cool Flow exhalation valve reduces moisture and CO2 build-up inside the facepiece. The filter has passed the Dolomite clogging test, confirming it maintains adequate breathability as particulate load increases during a shift.
Protection Class
FFP3 NR D
Standard
EN 149:2001 + A1:2009
Maximum Protection
Up to 20x WEL
Filter Efficiency
At least 99% of airborne particles
Valve Type
3M Cool Flow exhalation valve
Design
Fold-flat three-panel
Reusability
Non-reusable (NR), single shift
Packaging
Individually sealed polybag
Headstrap Colour
Red
Dolomite Test
Passed (D rated)
Box Quantity
1, 10, 120
Reviews
There are no reviews yet.
Be the first to review “3M Aura 9332+ FFP3 Valved Fold Flat Respirator Mask”Cancel Reply
Reviews
There are no reviews yet.