PHILLIPS Impact Driver Bits – PH – Double Ended – No.2 x 65 (2 pcs)

£2.45£2.94 EX VATINC VAT

Double ended PH2 impact driver bits built to handle the torque peaks of high-powered impact tools. Advanced heat treatment and black phosphate finish for durability and corrosion resistance. Useful when one end wears out and you still have a job to finish.

Credit Plans Available

If you use an impact driver regularly, you already know what cheap bits do. They cam out, they round off, they snap at the worst possible moment. This 65mm PH2 double ended impact driver bit is built specifically to handle the kind of repeated high-torque punishment that would destroy a standard bit in short order. Two working ends mean you get double the life from a single bit, which is a straightforward win on a busy site.

The metallurgy here is the important part. The bit hardness is deliberately reduced at the body rather than being hard throughout. That might sound counterintuitive, but a bit that flexes slightly under peak torque loads is far less likely to snap than one that resists until it doesn’t. The body absorbs the shock. The tip stays sharp and seated. This is the approach that separates impact-rated bits from the generic screwdriver bits that occasionally get used in a pinch.

Why the Heat Treatment on This 65mm PH2 Impact Bit Makes a Difference

The newly developed heat treatment process affects how the bit performs over time, not just when it’s new. Standard bits are often hard but brittle. Impact tools don’t drive screws smoothly — they deliver rapid rotational impacts, sometimes hundreds per minute. Without the right treatment, fatigue sets in fast and the bit fails at the point of maximum stress. The process used here targets longevity under exactly those conditions.

Black Phosphate Finish

The black phosphate coating does two things. It provides a degree of corrosion resistance, which matters when bits live in a van drawer or a belt pouch through all seasons. It also reduces surface friction slightly, which helps seating in the screw head. Not dramatic, but noticeable over a long day of driving.

The double ended design makes practical sense for a 65mm PH2 impact driver bit. When one tip shows wear, flip it and carry on. No rummaging through a bit wallet mid-job. The 65mm length gives you useful reach in tight spots without being so long that it becomes awkward in open areas.

These come as a pair, so you have a backup ready when you need it. Simple, sensible, and priced at a level where buying a few packs at once actually makes sense.

Pro Tip: When one tip starts to cam out under load, flip to the second end straight away rather than pushing through. Continuing to drive on a worn tip damages both the bit and the screw head, costing you more time than a quick flip ever would.

You may also like…

  • Flip Driver Set

    Flip Driver Set

    £2.95£3.54 EX VATINC VAT Add to basket
  • TORX Impact Rated Screwdriver Bits - Pk 10

    TORX Impact Rated Screwdriver Bits – Pk 10

    From £3.68£4.42 EX VATINC VAT Select options This product has multiple variants. The options may be chosen on the product page
  • Trend Snappy 4pc Flip Driver Set

    Trend Snappy 4pc Flip Driver Set

    £17.90£21.48 EX VATINC VAT Add to basket
  • Senco SENEA0330B DS7525 Square SQ2 Screwdriver Bit - Pack Of 2

    Senco SENEA0127B DS300 DuraSpin® Screwdriver Bit – Square SQ2 Pack 2

    £8.90£10.68 EX VATINC VAT Add to basket
PHILLIPS Impact Driver Bits - PH - Double Ended - No.3 x 65 (2 pcs)
PHILLIPS Impact Driver Bits – PH – Double Ended – No.2 x 65 (2 pcs)

£2.45£2.94 EX VATINC VAT

Add to basket