REISSER PZ2 Torsion Bits (25 pcs)

£7.95£9.54 EX VATINC VAT

Reisser PZ2 Torsion Bits in a 25-piece pack. Available in 25mm and 50mm lengths, these torsion bits are built to absorb impact driver torque without snapping, keeping you driving screws rather than hunting for replacements.

Credit Plans Available

Reisser PZ2 torsion bits are designed for one thing: staying in one piece while an impact driver throws everything it has at them. Standard bits snap. Torsion bits flex. That flex is the whole point — the torsion zone in the shank absorbs the rotational shock from an impact driver before it reaches the tip, which means the tip stays sharp longer and the bit itself lasts considerably longer than a standard chrome-vanadium alternative. If you are using an impact driver for production screwdriving and still buying basic bits, you are spending more than you need to.

These come in a 25-piece pack, available in either 25mm or 50mm length, both in PZ2. The 25mm is the one to reach for on a drill driver or when working in tight spots. The 50mm gives you standoff clearance when you are driving into recessed areas or need a bit more reach without swapping to an extension. Having a stock of both on site is not a bad idea, particularly if the job involves a lot of repetitive screwdriving.

Where Reisser PZ2 Torsion Bits Earn Their Keep

These bits are used wherever Pozidriv screws go in at volume. First fix timber work, second fix boarding, carcassing, decking, fencing — any task where you are putting in screws by the hundred and a snapped bit costs you time rather than just a bit of pocket change. Reisser themselves are known for quality fixings, and the torsion bits follow the same principle: made to work with impact drivers properly, not just survive them occasionally.

The PZ2 drive is the standard size for most construction screws used in the UK, so these will see use across practically every fixing task on a typical build or fit-out. Carpenters, first and second fixers, groundworkers running composite decking, roofers — anyone driving Pozidriv screws through the day will get proper use out of a pack of these.

At 25 bits per pack, there is enough here to keep going through a full day’s work without worrying about running short. They are not a luxury item. They are just the sensible choice when the alternative is snapped bits on the floor every half hour.

Pro Tip: When using torsion bits with a high-torque impact driver, fit the bit firmly into the chuck and check it is fully seated — a bit that is even slightly proud will cam out and chew the tip far faster than normal.

You may also like…

  • POZI - Impact Driver Bits - PZ2 - No.2 x 25 (10 pcs)

    POZI – Impact Driver Bits – PZ2 – No.2 x 25 (10 pcs)

    £5.80£6.96 EX VATINC VAT
  • Trend Snappy 4pc Flip Driver Set

    Trend Snappy 4pc Flip Driver Set

    £17.90£21.48 EX VATINC VAT
  • fischer FixTainer DuoLine (181 parts)

    Fischer DuoPower DUOLINE FixTainer Kit 181 Piece

    £14.93£17.92 EX VATINC VAT
  • POZI - Impact Driver Bits - PZ3 - No.3 x 25 (10 pcs)

    POZI – Impact Driver Bits – PZ3 – No.3 x 25 (10 pcs)

    £6.21£7.45 EX VATINC VAT