A 240mm high carbon steel reciprocating saw blade designed for straight cuts through logs, firewood and damp wood. Works well on wood and plastic. Sold in packs of 5.
The S1542K HCS reciprocating saw blade is a 240mm high carbon steel blade built for one job: cutting wood. Logs, rough timber, green wood, damp firewood — this is the blade you reach for when you need a clean straight cut without faffing around. High carbon steel runs cooler than bi-metal alternatives, which makes it a natural choice for low-heat materials like wood and plastic where bimetal would be overkill.
The 240mm length gives you good reach into thicker sections of timber, useful when you are working through larger logs or cutting back overgrown landscaping material. The blade profile is designed for straight tracking, so it does not want to wander mid-cut the way some general-purpose blades can when pushed into dense or wet wood.
Where the S1542K HCS Reciprocating Saw Blade Earns Its Keep
This blade is a staple for anyone doing demolition work involving structural timber, site clearance, or log processing. Groundworkers clearing tree roots, landscapers cutting back branches, and builders breaking out old roof joists will all find this blade earns its keep. It also handles plastic sheet and pipe reasonably well, which means it travels in a lot of tool bags as a reliable general-purpose wood blade.
Because HCS steel is tougher at lower temperatures, the blade holds up better in cold conditions than you might expect. Winter site work and outdoor cutting in damp environments are exactly where HCS blades tend to outperform harder but more brittle alternatives. The material stays less prone to snapping under lateral stress, which matters when you are cutting through unpredictable material with knots or embedded debris.
Pack Size and Value
Supplied in a pack of 5, these blades make sense to keep in stock. You will get through blades when cutting rough or dirty timber, and having a few spares on hand avoids the job stopping because one blade met a hidden nail. At this price point, buying a pack rather than singles is just common sense.
Pro Tip: When cutting damp or freshly felled wood, let the saw do the work at a steady pace rather than forcing it through — HCS blades cut cleanly under moderate pressure, but pushing too hard causes heat build-up and reduces blade life.
These blades are used wherever a reciprocating saw meets timber. Site clearance and demolition are the most common applications, particularly when cutting through structural joists, rafters, fence posts, and pallet wood. They are also widely used for log processing and firewood cutting, as well as landscaping work involving branches and root sections. Plastic sheet, conduit, and pipe cutting are secondary uses where the HCS blade handles the job cleanly without the cost of a specialist blade.
Best For
Logs and firewood cutting
Structural timber and joists
Site clearance and demolition
Damp and green wood
Plastic sheet and pipe
Works With
Standard reciprocating saws
Sabre saws with universal shank fitting
Cordless and corded reciprocating saws
Key Specifications
Blade length: 240mm
Material: High carbon steel (HCS)
Cut type: Straight cut
Pack quantity: 5 blades
Suitable for low heat materials
Not suitable for: Not suitable for cutting metal, masonry, or hardboard containing metal fixings. HCS blades are not designed for applications that generate significant heat, so avoid using these on abrasive or ferrous materials where a bi-metal or specialist blade is required.
Fit the blade into your reciprocating saw using the standard tool-free blade clamp or hex key fitting depending on your saw model. Make sure it is fully seated and locked before cutting. For logs and rough timber, let the blade length work for you by using the full stroke rather than short rapid passes, which wear the teeth unevenly.
On damp or green wood, a slower feed rate produces cleaner cuts and extends blade life. If the blade starts to feel like it is dragging rather than cutting, check for pitch build-up on the teeth — a quick wipe with a rag and a drop of blade lubricant can restore performance.
Ensure the reciprocating saw is switched off and unplugged or battery removed before fitting the blade
Insert the S1542K blade into the blade clamp with the teeth facing forward and the shank fully engaged
Lock the blade clamp securely and give the blade a firm tug to confirm it is seated
Mark your cut line on the timber if a straight cut is needed
Start the saw and allow the blade to reach full speed before contacting the material
Feed the blade into the cut using steady, consistent pressure without forcing it
Allow the full blade stroke to work through the cut rather than short choppy movements
After use, allow the blade to cool before handling and store away from moisture
Will the S1542K blade fit my reciprocating saw?
These blades use a standard universal shank fitting that is compatible with the vast majority of reciprocating and sabre saws on the market, including Bosch, Makita, DeWalt, Milwaukee and most other common brands. If your saw accepts standard reciprocating saw blades, these will fit.
Can these blades cut through wood that contains old nails or screws?
No. HCS blades are not designed for cutting through metal. If you are cutting old timber that may contain fixings, you would need a bi-metal blade which is built to handle occasional nail strikes. Using an HCS blade on metal will damage or snap the blade quickly.
The S1542K is a 240mm high carbon steel reciprocating saw blade with a straight cut profile designed specifically for wood and plastic. High carbon steel offers good toughness and flexibility at lower operating temperatures, making it well suited to wood cutting applications where a hard bi-metal blade would be excessive. The blade geometry is optimised for straight tracking through timber rather than curved or plunge cutting.
SKU
S1542K-A3035-240
Blade Reference
S1542K
Blade Length
240mm
Blade Material
High Carbon Steel (HCS)
Cut Type
Straight cut
Application
Wood and plastic
Pack Quantity
5
Box Quantity
5
Size
240mm
Reviews
There are no reviews yet.
Be the first to review “Reciprocating Saw Blades – Wood Cutting – High Carbon Steel – S1542K”Cancel Reply
Reviews
There are no reviews yet.