Turbo-rim diamond blade for angle grinders with M14 thread. Cuts porcelain, marble, granite, ceramic and natural stone with a clean, chip-free finish. Hardened and tempered body for consistent performance.
Size
Price
QTY
115mm x m14
£16.97£20.36
230mm x m14
£42.91£51.49
The Dart Red 10 PRO X is a diamond blade for angle grinders designed for anyone cutting hard tiles without the luxury of a dedicated tile saw. It screws directly onto a standard M14 spindle, so there is no adapter faff, no hunting for converters — just fit it and get on with the job. If you regularly cut porcelain on site, you will know how quickly a lesser blade starts chipping edges or losing pace. This one is built to avoid exactly that.
The continuous turbo-x rim is where the performance comes from. That segmented wave profile around the perimeter keeps the cut moving cleanly through hard materials while pulling dust and debris away from the cut line. The body is hardened and tempered, which matters when you are pushing through dense porcelain or polished granite where blade flex causes edge breakout. A stiff, well-made body keeps the cut true.
What the Dart Red 10 PRO X Diamond Blade Cuts
Porcelain is the obvious application — it is increasingly the default choice on bathroom and kitchen installs, and it is notoriously unforgiving on blades. The Red 10 PRO X handles it well, along with ceramic, marble, granite and natural stone tiles. Available in 115mm and 230mm, so it covers both a small grinder for detail cuts and a larger disc for longer straight runs.
The M14 thread fits the vast majority of angle grinders used on UK sites. No adapters needed. Whether you are a tiler working through a full bathroom refit or a builder cutting around a single hearth tile, this diamond blade for angle grinders keeps the cut clean and the edge intact. At this price point, it is worth keeping a spare on the van.
Pro Tip: When cutting porcelain, score a shallow starter cut first rather than going straight to full depth — this dramatically reduces the chance of edge chipping on the entry point.
This blade is used by tilers, bathroom fitters and general builders cutting hard tiles on site or in a workshop setting. It suits situations where a bench tile saw is not available or practical, giving a clean cut straight from an angle grinder. Common jobs include cutting around sockets, outlets, pipework and awkward corners where a fixed saw cannot reach. It is also used for shaping natural stone worktops and granite tile surrounds.
Best For
Porcelain tiles
Ceramic tiles
Marble
Granite
Natural stone tiles
On-site angle grinder cutting
Compatible With
Angle grinders with M14 thread
115mm grinders (115mm blade)
230mm grinders (230mm blade)
Key Specifications
Continuous turbo-x rim
Hardened and tempered body
M14 thread fitting
Available in 115mm and 230mm
Chip-free cutting profile
Not suitable for: Not suitable for wet cutting systems or bench saws. Not intended for cutting materials such as timber, metal, or plastics.
Fit the blade onto your angle grinder's M14 spindle and tighten the locking nut securely before use. Mark your cut line clearly on the tile and make a shallow scoring pass first, then increase depth on subsequent passes. Let the blade do the work — excessive downward pressure slows the cut and generates heat that shortens blade life.
Keep the grinder moving steadily. Dwelling in one spot builds up heat quickly, which is particularly damaging when cutting dense porcelain. For straight cuts, a guide edge clamped to the tile gives a much cleaner result than freehand.
Check the blade size matches your angle grinder — 115mm or 230mm as appropriate
Fit the blade onto the M14 spindle and tighten the locking nut firmly
Mark the cut line clearly on the tile surface using a pencil or marker
Make a shallow scoring pass along the full cut line before going to depth
Follow up with steady, progressive passes increasing depth gradually
Keep the grinder moving at a consistent pace — avoid dwelling in one spot
Allow the blade to cool between cuts if working through a large batch of tiles
Will this blade fit my angle grinder?
Yes, provided your angle grinder has a standard M14 thread spindle, which covers the vast majority of 115mm and 230mm grinders sold in the UK. Check your grinder's spindle thread before ordering if you are unsure.
Can I use this blade for wet cutting?
No. The Dart Red 10 PRO X is designed for dry cutting with an angle grinder. It is not suitable for use in wet bench saw systems. Dry cutting does generate dust, so use appropriate respiratory protection and work in a ventilated area.
Which size should I choose, 115mm or 230mm?
The 115mm blade suits a compact angle grinder and is ideal for detail cuts, awkward angles and working in tight spaces. The 230mm blade covers longer straight cuts more quickly and suits larger grinders used for bigger tile formats or slab work.
The Dart Red 10 PRO X uses a continuous turbo-x rim profile with diamond segments embedded into a hardened and tempered steel body. The turbo profile maintains cutting speed through dense materials while reducing chip-out at the cut edge. The M14 threaded bore provides a direct fit to standard angle grinder spindles without additional adapters.
Blade Sizes Available
115mm, 230mm
Thread
M14
Rim Type
Continuous turbo-x
Body Treatment
Hardened and tempered
Compatible Machine
Angle grinder
Suitable Materials
Porcelain, ceramic, marble, granite, natural stone
Size
115mm x m14, 230mm x m14
Reviews
There are no reviews yet.
Be the first to review “Dart Red 10 PRO X Turbo Cut & Grind Diamond Blades – For Angle Grinders”Cancel Reply
Reviews
There are no reviews yet.