Galvanised Z clips for attaching trellis or timber fence panels to posts. Supplied in a box of 100. Dimensions 60 x 56 x 15mm. A straightforward fixing that does the job without fuss.
Z clips are the standard fixing for attaching trellis panels and timber fence panels to posts without using screws or nails through the face of the panel. Each clip hooks over the top of the panel and fastens to the post, holding the panel securely while still allowing it to be lifted free for access or maintenance. That last point matters more than people realise when a panel needs replacing after a storm.
This box of 100 galvanised Z clips covers a solid run of fencing in one purchase. At 60 x 56 x 15mm, the clips suit standard timber fence panel framing and trellis sections. The galvanised finish resists corrosion in outdoor conditions, which is exactly what you need from a fixing that will spend its working life exposed to rain and temperature changes.
Where Galvanised Z Clips Fit In Typical Fencing Work
Z clips are used across residential and commercial fencing installations wherever panels need to be fitted cleanly to posts without surface fixings showing on the front face. Landscapers, fencing contractors and ground workers use them as a matter of course. They also appear regularly in garden renovation work where trellis sections are being hung against existing structures.
Buying in a box of 100 means you have enough clips to cover a full fencing run on a typical garden or light commercial job. Most installers keep a box in the van rather than buying clips panel by panel. At this quantity, the price works out sensibly per clip, and you are not running to the merchant halfway through a job because you counted too close.
The galvanised coating gives these Z clips the corrosion resistance needed for permanent outdoor use, making them suitable for installation in all standard UK weather conditions without early deterioration.
Pro Tip: Fix the lower clip to the post first at the correct height, then hook the panel in before securing the upper clip so you can adjust the panel position before everything is locked off.
Galvanised Z clips are used to fix timber fence panels and trellis sections to timber or concrete fence posts in residential gardens, commercial landscaping projects and boundary fencing installations. They suit any job where panels need to be held securely without visible face fixings, and where the ability to remove a panel without major dismantling is useful. Fencing contractors, landscapers and builders' merchants recommend them as a standard fitting for panel fencing of most common types.
Best For
Attaching timber fence panels to posts
Fixing trellis sections to posts or structures
Residential garden fencing
Commercial landscaping and boundary fencing
Works With
Standard timber fence panels
Trellis panels
Timber fence posts
Concrete fence posts
Key Features
Galvanised for corrosion resistance
60 x 56 x 15mm clip size
Box of 100 clips
Allows panel removal without dismantling post fixings
No visible face fixings required
Not suitable for: Not suitable for metal fence panels or mesh systems where a different clip profile is required. Not intended for structural load-bearing applications.
Mark the clip positions on the post before fitting so panels sit level across the run. Fix the lower clip first, then hook the panel into place and secure the upper clip. Check the panel is plumb before fully tightening. Two clips per panel side is standard practice for most timber fence panel sizes.
Mark fixing heights on each post before starting, using a string line to keep panels level across the run.
Fix the lower Z clip to the post at the marked height using appropriate screws for the post material.
Hook the bottom edge of the fence panel or trellis section into the lower clips along the run.
Check the panel sits plumb and square before fitting the upper clips.
Fix the upper Z clips over the top edge of the panel and secure to the post.
Check the panel can be lifted free cleanly, confirming the clips are correctly positioned before moving to the next bay.
How many Z clips do I need per fence panel?
Most standard timber fence panels need two clips per side, so four clips per panel in total. On wider or heavier panels, adding a third clip per side gives extra stability. A box of 100 clips will typically cover around 25 panels using four clips each.
Will these Z clips rust over time in outdoor conditions?
The galvanised coating provides good corrosion resistance for outdoor use in standard UK conditions. Galvanised fixings are the normal choice for fence panel installations and will give reliable service life without significant rust under normal exposure.
These Z clips are manufactured from steel with a galvanised coating applied to protect against corrosion in outdoor environments. Each clip measures 60 x 56 x 15mm and is sized to suit standard timber fence panel framing profiles and trellis sections. The Z profile allows the clip to hook over a panel edge and fix flat against a post face, holding the panel without face-fixing through the panel itself.
Finish
Galvanised
Dimensions
60 x 56 x 15mm
Pack Quantity
100
Material
Steel
Application
Fence panels and trellis to posts
SKU
FCA102
Reviews
There are no reviews yet.
Be the first to review “Z Clips – Galvanised – Box 100”Cancel Reply
Reviews
There are no reviews yet.