A mixed kit of ForgeFast Pozi Elite woodscrews covering nine popular sizes. Ideal for general joinery, first fix, and second fix work. Cuts down on trips to the van and keeps your work moving without hunting for the right size.
The ForgeFast Pozi Elite Performance Woodscrews Kit is a practical selection of nine frequently used sizes, all in one box. If you regularly reach for pozi woodscrews across different jobs, this kit takes the guesswork out of what to stock. The forgefast pozi woodscrew kit covers everything from small 3.5 x 16mm screws for trim and cabinet work right up to 5.0 x 80mm for structural timber fixing. It is the sort of thing you buy once and wonder why you did not do it sooner.
Each size in the kit uses the ForgeFast Elite point design, which cuts into timber cleanly without the need for pre-drilling in most applications. The sharp gimlet point reduces splitting on softwood and sheet materials, and the twin-cut thread pulls the screw home quickly. You get a consistent, flush finish without having to force the driver or over-torque at the end.
What the ForgeFast Pozi Elite Kit Covers
The kit brings together sizes that cover the bulk of everyday woodwork. The smaller diameter 3.5mm screws handle carcassing, cabinet fitting, and light timber connections. The 4.0mm range is the workhorse, covering stud work, battening, and general joinery. The 5.0 x 50mm and 5.0 x 80mm screws are there for heavier timber connections where you need proper holding power. Between the nine sizes, most first and second fix jobs are covered without opening a second box.
The pozi drive head is a practical choice for site work. It is more tolerant of slight misalignment than torx, works with every pozi bit you already carry, and resists cam-out well under normal driving conditions. That said, keep a decent quality bit in the driver and replace it when it starts slipping — a worn bit will chew these heads just like any other screw.
This kit suits carpenters, joiners, general builders, and anyone who needs a reliable spread of woodscrew sizes ready to go. At this price, it makes sense as a van stock item or a site-start kit.
Pro Tip: The 5.0 x 80mm screws in this kit will drive cleanly into most construction timber without pre-drilling, but in hardwood or near the end grain of dense timber, a quick pilot hole prevents splitting and saves you pulling broken fixings.
These screws are used across a wide range of joinery and carpentry tasks. The smaller sizes suit cabinet fitting, skirting, architrave, and light stud work. The mid-range 4.0mm sizes are the day-to-day choice for studwork framing, battening out walls, and general timber-to-timber connections. The larger 5.0mm screws handle heavier structural fixing where a smaller diameter would not provide sufficient pull-out resistance.
The kit is well suited to site carpenters who work across first and second fix on a single project, or for tradespeople who carry a general selection rather than specialist bulk packs. It also works well in workshop and shopfitting environments where a mix of sizes is needed without committing to full boxes of each.
Best For
First and second fix carpentry
Cabinet and furniture fitting
Stud work and battening
Skirting and architrave fixing
General timber-to-timber connections
Site and van stock top-up
Works With
Softwood and construction timber
Sheet materials including MDF and plywood
Hardwood with pilot hole
Standard pozi driver bits
Cordless and mains-powered screwdrivers
Key Features
Nine popular sizes in one kit
Elite gimlet point for clean entry
Twin-cut thread for fast driving
Pozi drive head
Countersunk head for flush finish
1000 screws total across all sizes
Not suitable for: Not suitable for outdoor or exposed applications unless used with appropriate treatment or coating protection. Not designed for fixing into masonry, concrete, or metal without suitable plugs or pre-drilled clearance holes.
Select the appropriate size for the timber thickness and load required. As a general rule, the screw should penetrate the receiving timber by at least twice the thickness of the piece being fixed. For most softwood and sheet materials, drive directly without pre-drilling using a cordless driver set to a controlled torque clutch setting.
In hardwood or when fixing close to an edge or end grain, drill a pilot hole slightly smaller than the screw shank to avoid splitting. Keep your pozi bit clean and replace it at the first sign of rounding off — a fresh bit costs pennies compared to the time spent extracting a chewed screw from finished timber.
Select the correct screw size for your timber thickness and fixing depth required
Set your driver clutch to a mid-torque setting to avoid over-driving
For softwood and sheet materials, drive directly without pre-drilling
For hardwood or end-grain fixing, drill a pilot hole first to prevent splitting
Position the screw and apply firm, steady pressure as you drive
Drive until the countersunk head sits flush with the timber surface
How many screws are included in the ForgeFast Pozi Elite kit?
The kit contains 1000 screws in total across nine sizes: 3.5 x 16mm (150), 3.5 x 25mm (100), 3.5 x 30mm (180), 4.0 x 25mm (130), 4.0 x 30mm (140), 4.0 x 40mm (100), 4.0 x 50mm (80), 5.0 x 50mm (55), and 5.0 x 80mm (65).
Do the ForgeFast Pozi Elite screws need pre-drilling in softwood?
No, the Elite gimlet point is designed to cut into softwood and most sheet materials without pre-drilling. For hardwood, dense timber, or fixing close to edges and end grain, a pilot hole is recommended to prevent splitting and give a cleaner result.
ForgeFast Pozi Elite woodscrews feature a hardened steel construction with a countersunk head and twin-cut thread designed to reduce driving resistance. The gimlet point geometry initiates in timber without the need for pilot drilling in most softwood applications. The pozi drive recess is machined to close tolerances for consistent bit engagement and reduced cam-out under load.
Reviews
There are no reviews yet.