ForgeFast Pozi Elite Performance Woodscrews – Boxes

ForgeFast Pozi Elite woodscrews are engineered for tradespeople who put a lot of screws in every day and need them to go in fast, sit flush, and stay put. The Pozi Elite range comes from the same team behind Torxfast, so the pedigree is there. These are forgefast pozi elite woodscrews built around a handful of specific design choices that genuinely make a difference on site.

The double cutting point does two jobs at once: it reduces the chance of the timber splitting as the screw enters, and it cuts drive time because the thread engages cleanly from the off. No pre-drilling needed on most softwood and sheet material. The serrated cutting thread reduces torque as it bites, which means less effort and a firmer, more consistent fix. Pull-out resistance is improved over a standard parallel thread, which matters when you are fixing into end grain or thinner sections.

The countersunk head has six angled lobes rather than a plain cone, which improves the countersinking action and gives you a cleaner, flatter finish without needing to run a countersink bit first. The reinforced neck adds holding power at the head, which is often where screws fail under load.

ForgeFast Pozi Elite Woodscrew Coating and Corrosion Resistance

The Elementech 400 surface coating is a non-chromium, Cr3+ yellow and zinc plated finish, which means it is RoHS-compliant and environmentally friendlier than older zinc processes. More practically, it lasts up to six times longer than standard zinc plating and has been salt spray tested to 400 hours. For interior timber fixing that is a solid level of protection against moisture and handling.

The anti-friction coating on the thread also helps prevent jacking during drive, which stops the workpiece lifting off the substrate as the screw tightens down. Useful on anything from stud work to cabinet fitting.

Available in an extensive range of sizes from 3.0 x 12mm right up to 6.0 x 240mm, in boxes of 100 or 200 depending on size.