C2 Strongfix Pro Screws – Timco – Tubs

The Timco C2 Strongfix Pro screw tubs are a firm favourite on site for good reason. These are twin-cut, fully-coated woodscrews built around a patented design that genuinely improves on the standard screw in almost every measurable way. If you’re reaching for timco c2 strongfix screw tubs, you already know what you’re getting: fast drive, clean countersink, no cam-out, and a finish that doesn’t leave you grinding the head flush with a belt sander afterwards.

The twin-cut point is the standout feature. It picks up quickly, bites cleanly, and significantly reduces timber splitting compared to a conventional point. That matters when you’re fixing hardwood, working close to an edge, or just trying to get through a hundred fixings without splitting half of them. The ribs under the head do the countersinking work for you and help prevent surface damage as the screw beds in.

What Makes the C2 Strongfix Different

The dual angle thread is worth understanding. It isn’t just marketing. The thread geometry is designed to maximise pull-out resistance, which is exactly what you need in structural timber, decking, or any load-bearing application where screws are working under tension. Sizes up to and including 75mm are fully threaded; 80mm and above carry a 70mm thread length, which maintains grip without over-stressing shorter timber sections.

The high-molecular polymer lubricant coating reduces insertion torque by up to 52% compared to an uncoated screw. That’s less effort per screw, less heat on your bit, and less wear on your driver. The same coating also delivers up to 20 times the rust protection of standard zinc plating, which makes these a sensible choice for external joinery and treated timber where corrosion is a real concern.

Supplied in large tubs across a comprehensive size range, these are built for tradespeople who buy in volume and need screws that perform consistently from the first one to the last.