British Gas approved petrolatum tape for long-term corrosion protection on pipes and fittings. Self-adhesive, flexible and conforms easily to irregular surfaces with minimal preparation. Ideal for underground and exposed metalwork.
Denso Tape is a self-adhesive petrolatum tape used for corrosion protection and sealing on pipes, fittings and metalwork. It has been a trusted solution in the plumbing and utilities trade for decades, conforming to British Gas Standard BG/PS/CW2 and carrying British Gas approval. When you need reliable, long-term protection against moisture ingress and corrosion, this is the tape that gets specified.
The tape consists of a fabric base impregnated with petrolatum compound, which remains permanently plastic. This means it does not harden, crack or become brittle over time, even when buried underground or exposed to temperature fluctuations. The self-adhesive nature allows it to bond directly to prepared surfaces without the need for primers or additional adhesives on most substrates, which keeps application straightforward and reduces time on site.
Why Tradespeople Choose Denso Tape
Corrosion is the enemy of any metal installation exposed to soil, moisture or aggressive environments. Denso Tape creates a waterproof barrier that physically excludes water and oxygen from the substrate, stopping the electrochemical process that causes rust and degradation. Unlike paint coatings that can chip or peel, the petrolatum compound self-heals around minor damage and maintains contact with the surface through ground movement and thermal expansion.
The flexibility of the tape is a genuine advantage when working with irregular shapes. Flanges, valve bodies, repair clamps and awkward fittings can all be wrapped without the tape bridging or leaving voids. It conforms to contours under hand pressure, filling surface irregularities and creating intimate contact with the metal. This is not a tape that fights back when you are trying to work it around a T-piece at the bottom of a trench.
Minimal Preparation, Maximum Protection
Surface preparation requirements are straightforward compared to many coating systems. Remove loose rust, scale and debris, ensure the surface is dry, and apply. There is no mixing, no pot life to worry about, and no waiting for primers to cure before you can wrap. In repair situations where speed matters, this simplicity is worth a lot.
Denso Tape is used extensively by gas and water utilities, but it is equally valuable for general plumbing work, heating installations, and industrial applications. Underground service pipes, exposed pipework in plant rooms, and temporary protection during construction all benefit from the same reliable performance. The tape remains effective across a wide temperature range and resists attack from most soils and groundwater conditions found in the UK.
For anyone who has chased a leak caused by corroded fittings or had to dig up failed pipework, the value of proper protection at installation is obvious. Denso Tape is not glamorous, but it does exactly what it claims to do, year after year.
Pro Tip: Overlap each wrap by at least 55% to ensure there are no gaps or thin spots in the protection layer.
Denso Tape is used for corrosion protection on buried and exposed metalwork including gas pipes, water mains, heating pipework, flanges, valves and repair clamps. It suits both new installations and remedial work where existing pipework needs protection from further degradation. The tape is commonly specified by utilities and contractors working on underground services, but it is equally useful in plant rooms, external pipe runs and industrial settings where metal is exposed to moisture or aggressive conditions.
Best For
Underground pipe protection
Flanges and valve bodies
Gas and water service connections
Corrosion prevention on exposed metalwork
Repair and remedial wrapping
Compatible Materials
Steel pipes and fittings
Cast iron
Ductile iron
Copper
Galvanised metal
Key Features
British Gas approved to BG/PS/CW2
Self-adhesive petrolatum compound
Remains flexible and does not harden
Conforms to irregular shapes
Minimal surface preparation required
Not suitable for: Denso Tape is not intended for use on plastic pipes or as a structural repair. It provides corrosion protection, not pressure containment.
Clean the surface to remove loose rust, scale, dirt and moisture. The tape applies directly by hand without primers on most clean metal surfaces. Wrap with firm pressure, overlapping each turn by at least half the tape width to ensure continuous coverage. Mould the tape into irregular shapes and around fittings using hand pressure to eliminate voids.
Remove loose rust, scale and debris from the surface
Ensure the substrate is dry before application
Start wrapping at one end with firm hand pressure
Overlap each turn by at least 55% of the tape width
Mould the tape into contours around fittings and flanges
Smooth down to eliminate air pockets and ensure full contact
Does Denso Tape need a primer before application?
On clean, prepared metal surfaces, Denso Tape can be applied directly without a primer. For heavily pitted or irregular surfaces, a Denso primer paste can improve adhesion and fill surface voids, but it is not required for most standard applications.
Can Denso Tape be used on live gas or water pipes?
Denso Tape is approved for use on gas installations to British Gas Standard BG/PS/CW2. It can be applied to pipes in service provided the surface is prepared and dry. It is a protection product, not a leak sealant, so the pipework must be sound before wrapping.
How long does Denso Tape protection last?
Properly applied Denso Tape provides long-term protection measured in decades rather than years. The petrolatum compound does not dry out or degrade, and buried installations protected with Denso products have remained effective for over 50 years in documented cases.
Denso Tape consists of a non-woven synthetic fabric impregnated with a neutral petrolatum compound containing corrosion inhibitors. The compound remains permanently plastic across a wide service temperature range, maintaining conformability and self-healing properties throughout its service life. The tape conforms to British Gas Standard BG/PS/CW2 for corrosion protection of buried pipework.
Type
Self-adhesive petrolatum tape
Base material
Non-woven synthetic fabric
Compound
Petrolatum with corrosion inhibitors
Standard
British Gas BG/PS/CW2
Approval
British Gas approved
Reviews
There are no reviews yet.
Be the first to review “Denso Tape Self-Adhesive Petrolatum Tape”Cancel Reply
Reviews
There are no reviews yet.