A six-piece synthetic brush set built around Prodec’s X Zero filament technology, rated number one for pick-up and release. Includes 1.5″, 2″, angled 2″ and 3″ sizes. Quality wooden handles throughout. Performance guaranteed or your money back.
The Prodec Premier Advanced Pro 6 Piece Synthetic Paint Brush Set is one of those kits that earns its place in the bag rather than sitting in a drawer after one use. Built around Prodec’s X Zero synthetic filament technology, independently tested and rated number one for pick-up and release, these brushes load well, cut in cleanly and lay paint off without drag or streaking. That is not nothing when you are spending all day on a rollout.
The set covers the most common sizes you reach for daily. Two 1.5″ brushes for cutting in around frames and architraves, two 2″ for general work and window bars, one 2″ angled for beads and fiddly details, and a 3″ for broader flat areas. Prodec have thought about what decorators actually use rather than packing the set with sizes that gather dust.
Why the Prodec Synthetic Brush Set Works Across Different Coatings
The evenflo coating on the filaments is what separates these from cheaper synthetic sets. It controls how paint is held and released during the stroke, giving you more consistent coverage with less effort. Waterbased emulsions, satinwood, eggshell, gloss — these brushes handle the lot without the filaments clumping or going limp mid-job. Anyone who has fought a cheap synthetic brush through a full gloss coat will know exactly what problem the evenflo treatment is solving.
The wooden handles are properly weighted and comfortable in the hand, which matters more than most people admit until hour three of a painting session. They are also the sort of handle that does not feel like it might delaminate the moment it gets damp. These are not decorator’s props — they are working tools.
Guaranteed Performance
Prodec back the X Zero range with a money-back performance guarantee, which is either very confident or very foolish. Given that these brushes are independently rated at the top of their category for pick-up and release, it is almost certainly the former. If the brushes do not perform as claimed, you get your money back. That takes away any risk and, frankly, makes trying this prodec 6 piece synthetic paint brush set a straightforward decision for any decorator who has not yet used them.
At this price point for six brushes of this calibre, the maths are simple enough that even a QS would approve.
Pro Tip: Rinse synthetic filaments thoroughly after waterbased work and reshape the tip before storing flat — this keeps the evenflo coating effective for longer and stops the filaments fanning out over time.
This set is aimed squarely at professional decorators and skilled DIYers working across domestic and light commercial interiors. The range of sizes covers cutting in around doors, windows and skirting, detailed work on architraves and glazing bars, and broader coverage on panelled walls or joinery. The angled brush is particularly useful for bead work and anywhere a straight-edged cut needs to follow a line rather than a flat surface.
The synthetic filaments perform well with modern waterborne satinwoods, eggshells and emulsions, and they hold up equally well with oil-based gloss when cleaned promptly. A solid everyday set for painters who need reliable tools across a variety of interior decorating tasks.
Best For
Cutting in around doors, windows and skirting
Glazing bars and detailed architrave work
Broad joinery and panelled surfaces
Waterbased emulsions and satinwoods
Oil-based gloss and eggshell finishes
Set Contents
2 x 1.5" brushes
2 x 2" brushes
1 x 2" angled brush
1 x 3" brush
Key Features
X Zero synthetic filament technology
Evenflo coating for controlled pick-up and release
Rated number one in independent pick-up and release tests
Quality wooden handles
Money-back performance guarantee
Suitable for waterbased and oil-based coatings
Not suitable for: Not intended for exterior masonry work or heavy-bodied textured coatings, where a natural bristle or masonry brush would be more appropriate. Solvent-heavy industrial coatings may affect the filaments over time if the brushes are not cleaned promptly.
Before first use, flex the filaments gently to remove any loose fibres, then lightly dampen with water for waterbased paints or white spirit for oil-based. This conditions the filaments and helps paint flow from the root of the brush rather than just the tips.
Load the brush to about a third of the filament length and apply with long, even strokes. The evenflo coating does most of the work — resist the temptation to overload or scrub, as these brushes release paint consistently when used with a light, steady hand. Lay off with light strokes in one direction to finish.
Flex the filaments before first use to remove any loose fibres
Dampen with water for waterbased paint or white spirit for oil-based to condition the brush
Load to approximately one third of the filament length — no deeper
Apply with long, even strokes using light, consistent pressure
Cut in tight areas with the angled brush, keeping the edge of the filament against the line
Lay off with light strokes in a single direction to remove brush marks
Clean thoroughly after use, reshape the tip and store flat or hanging
Are these brushes suitable for oil-based gloss as well as waterborne paints?
Yes. The X Zero synthetic filaments work with both waterbased and oil-based coatings including gloss, satinwood and eggshell. Clean them promptly with the appropriate solvent after oil-based use and they will stay in good condition.
What does the money-back performance guarantee actually cover?
Prodec guarantee the brushes will perform as described in terms of pick-up and release. If you find they do not meet that standard in normal use, you can claim a refund. It is a product confidence guarantee rather than a standard returns policy.
The brushes use Prodec's X Zero synthetic filament blend treated with an evenflo coating that regulates paint uptake and release during application. Independently tested and rated number one in pick-up and release performance within their category. Handles are solid wood, secured with a corrosion-resistant ferrule. The filament construction is compatible with waterborne and solvent-based decorating paints in normal interior applications.
Brand
Prodec
Range
Premier Advanced Pro
Filament Type
Synthetic (X Zero)
Filament Coating
Evenflo
Handle Material
Wood
Set Contents
2 x 1.5", 2 x 2", 1 x 2" Angled, 1 x 3"
Number of Brushes
6
Suitable Coatings
Waterbased and oil-based paints
Performance Guarantee
Yes, money-back
Reviews
There are no reviews yet.
Be the first to review “Prodec PREMIER Advanced Pro 6 Piece Synthetic Paint Brush Set”Cancel Reply
Reviews
There are no reviews yet.