A 6 piece professional paint and varnish brush set made with 100% SRT synthetic filament. Includes two 1.5 inch, two 2 inch, one 3 inch and one 2 inch angled cutting-in brush. Natural wood beaver tail handles with stainless steel ferrules.
The ProDec Trojan Pro Synthetic Brush Set gives you six well-chosen brushes in one go, covering the sizes that actually get used on a typical decorating job. Whether you’re cutting in around skirting, working across larger wall sections, or finishing woodwork and varnish, there’s a brush here for it. The full ProDec 6 piece Trojan synthetic brush set is built around 100% SRT filament, which is the kind of synthetic bristle that holds a good load of paint and releases it evenly without dragging or streaking.
SRT, or super-refined tapered filament, behaves differently to cheaper synthetic brushes. The taper on each filament gives the tips a softness that mimics natural bristle, which matters when you’re applying gloss or varnish and don’t want visible brush marks left in the finish. It also means these brushes work well across water-based and solvent-based products, so you’re not restricted to one paint type.
What’s in the ProDec Trojan 6 Piece Brush Set
You get two 1.5 inch brushes, which are ideal for door frames, window beads and narrow sections. Two 2 inch brushes cover most general cutting-in and detailed work. The 3 inch brush is your workhorse for larger panels, walls and ceilings when you want a brush rather than a roller. The 2 inch angled cutting-in brush is the one you’ll reach for first around coving and along ceiling lines, the angled cut giving you a clean, straight edge without masking tape.
Handle and Ferrule Construction
The natural wood beaver tail handle sits comfortably in the hand over long periods, balanced and not too light. The stainless steel ferrule keeps bristles locked in place and resists rust when the brushes are washed out and stored, which is something cheaper sets tend to fail at fairly quickly.
At this price point for six brushes, the Trojan set is a practical choice for decorators who need reliable tools without spending serious money on each individual brush. Keep them clean after every use and they’ll last well beyond what the price suggests.
Pro Tip: After washing SRT brushes, reshape the bristles with your fingers and store them flat or hang them bristle-down to keep the filament tips in good condition for longer.
This brush set suits interior and exterior decorating work across residential and commercial sites. The mixed sizes make it practical for painting doors, windows, skirting boards, architrave, walls and ceilings in a single kit. The angled brush handles cutting in along ceiling lines and into corners where a straight brush becomes awkward. The 3 inch brush covers larger flat areas without switching to a roller. Decorators, site painters and general builders all find a set like this useful to keep on the van.
Best For
Interior and exterior decorating
Cutting in on ceilings and walls
Painting doors, windows and skirting
Applying varnish and wood finishes
General trade painting work
Works With
Water-based emulsions and primers
Solvent-based gloss and eggshell
Varnishes and wood stains
Satinwood and undercoats
Key Features
100% SRT synthetic filament
Natural wood beaver tail handle
Stainless steel ferrule
6 brushes in one set
Angled cutting-in brush included
Suitable for water and solvent-based paints
Not suitable for: Not ideal for masonry paints or thick textured coatings, where a stiffer brush or block brush would give better coverage. The 1.5 inch brushes are not intended for fence treatments or other rough outdoor surfaces.
Before first use, flick the bristles firmly to remove any loose filaments. Load the brush to about a third of the bristle length, tap off excess on the side of the tin rather than wiping, and apply with long, even strokes. The angled brush works best for cutting in when held at a shallow angle to the surface, using the tip rather than the full width of the bristle.
After use, wash water-based paints out with warm soapy water and rinse thoroughly. For solvent-based products, use the appropriate thinners followed by a wash in warm water. Reshape the bristles before leaving to dry.
Flick the bristles before use to remove any loose filaments
Select the appropriate brush size for the area being painted
Load the brush to no more than a third of the bristle depth
Tap off excess paint on the inside of the tin rather than wiping across the rim
Apply with long, even strokes following the grain or surface direction
Use the angled brush for cutting in at ceiling lines, corners and beads
Wash out thoroughly after use and reshape bristles before storing
Are these brushes suitable for oil-based gloss and varnish?
Yes. The 100% SRT synthetic filament works well with both water-based and solvent-based products, including oil-based gloss, eggshell and varnish. Clean with appropriate thinners after use with solvent-based paints, then follow up with a warm soapy water wash.
What sizes are included in the ProDec Trojan 6 piece brush set?
The set contains two 1.5 inch brushes, two 2 inch brushes, one 3 inch brush and one 2 inch angled cutting-in brush. That covers most painting tasks without needing to buy additional sizes separately.
The Trojan brush set uses 100% SRT, super-refined tapered synthetic filament, designed to mimic the performance of natural bristle in both water and solvent-based media. The stainless steel ferrule resists corrosion and maintains a firm bristle set over repeated use and washing. Handles are shaped natural wood in a beaver tail profile for grip and balance during extended use.
Reviews
There are no reviews yet.