Hammer-in square anchors designed specifically for AAC (aircrete) blocks. No special tools needed, just push or hammer them in and drive your screw. Takes screw gauges 6 to 10. Made from reinforced nylon with patented legs for solid pull-out resistance.
Fixing into aircrete is one of those jobs that catches people out. Standard wall plugs just spin or pull straight through — the material is too soft and porous to grip them properly. These Aercrete Square Anchors are designed specifically for AAC blocks, giving you a clean, reliable fixing without needing any specialist kit. They are square anchors in the truest sense: the shape and the patented expanding legs do the work, biting into the block as the screw is driven home.
Each anchor is manufactured from 100% reinforced nylon, which handles the slight give in aircrete without cracking or collapsing. The stand-alone fixing method is straightforward — push or hammer the anchor into a pre-drilled hole, drive your screw, done. No chemical resin, no two-part system, no waiting around.
Where Aercrete Square Anchors Get Used
These are genuinely useful for anyone working on extensions, loft conversions, or new builds where aircrete blockwork is common. Timber frames, service noggins, cabinet fixings, socket back boxes, pipe clips — anything that needs a secure point in a block that would otherwise chew up a standard plug. Lightweight loads to moderate fixings, they cover a broad range of everyday site tasks.
The square anchor design means it resists rotation during screw insertion, which is something round plugs in soft material simply cannot manage. That patented leg system creates the pull-out tolerance you actually need when the fixing is going to be under load. Screw sizes 6 to 10 gauge are all compatible, so you are not restricted to one specific driver setup.
Sold in bags of 10, these square anchors are priced to keep in your bag as a matter of course. If you work regularly with aircrete, you will reach for these more than you expect.
Pro Tip: Always drill to the correct depth before inserting these anchors — too shallow and the legs cannot expand fully, which significantly reduces pull-out strength in the block.
These square anchors are used wherever fixings are needed into AAC (aircrete) blockwork, a material common in modern construction and extensions. Typical applications include fixing battens, pipe brackets, back boxes, shelving supports, and cabinet mounts directly into the block face. They are used by groundworkers, general builders, electricians, and plumbers working on new builds and refurbishments where aircrete is specified. A straightforward option when you need a reliable fixing and do not want the faff of chemical anchors for everyday loads.
Best For
AAC (aircrete) blockwork fixings
Back box and bracket installation
Pipe clip and cable fixing
Batten and timber frame attachment
Lightweight to moderate load applications
Compatible With
Screw gauge sizes 6 to 10
Standard AAC and aerated concrete blocks
Pre-drilled fixing holes
Key Features
100% reinforced nylon construction
Patented expanding legs for pull-out resistance
Hammer-in installation, no specialist tools
Square profile resists rotation on screw drive
Stand-alone fixing, no resin or chemical required
Not suitable for: Not suitable for use in dense aggregate blocks, brick, or masonry — these anchors are engineered specifically for the softer, porous structure of AAC. Not recommended for heavy structural fixings or overhead load applications.
Mark and drill your fixing point to the correct depth for the anchor length. Push or gently hammer the square anchor flush into the hole. Drive your screw of gauge 6 to 10 directly into the anchor — the patented legs expand against the block as the screw advances, locking the fixing in place.
Mark your fixing position on the aircrete block
Drill a clean hole to the correct diameter and depth for the anchor
Push or hammer the square anchor into the hole until it sits flush
Drive a gauge 6 to 10 screw into the anchor centre
The legs expand as the screw is tightened, gripping the block internally
Can these square anchors be used in standard brick or dense blockwork?
No. These anchors are engineered for AAC (aircrete) blocks specifically. The softer, porous structure of aircrete is what allows the expanding legs to grip. In harder materials like brick or dense aggregate block, a standard nylon wall plug or frame fixing is the better choice.
What screw sizes work with these anchors?
They are compatible with screw gauges 6 through to 10, which covers most general-purpose fixings you would use on site. No specialist screws needed — standard wood screws or coarse thread screws at the appropriate gauge will work fine.
Do I need any special tools to install them?
No. A standard drill to prepare the hole and a screwdriver or drill driver to insert the screw is all that is required. The anchor itself is hammered or pushed in by hand. It is deliberately designed to be quick and tool-free beyond the basics.
Manufactured from 100% reinforced nylon, these square anchors use a patented expanding leg design to achieve pull-out resistance in AAC and aerated concrete blocks. The square profile prevents rotation during screw insertion, a common failure point with round plugs in soft masonry. Compatible with screw gauges 6 to 10. Supplied in bags of 10.
Material
100% reinforced nylon
Compatible Screw Gauge
6 to 10
Installation Method
Hammer-in, no specialist tools required
Fixing Type
Stand-alone expanding anchor
Suitable Substrate
AAC / aircrete blocks
Pack Quantity
10
Reviews
There are no reviews yet.
Be the first to review “Aercrete Square Anchors – Bag 10”Cancel Reply
Reviews
There are no reviews yet.