50mm plastic headed nails for fixing fascia boards, soffits and UPVC trims. Available in Anthracite Grey, Black, Brown and White to match your cladding. Supplied in boxes of 100.
Available options and pricing for 50mm Plastic Headed Nails, with quantity selectors and a running total
Colour
SKU
Price
QTY
Total
White
OBN50W
£4.59£5.51
—
Black
OBN50BL
£5.30£6.36
—
Brown
OBN50BR
£5.12£6.14
—
Anthracite Grey
OBN50AG
£4.59£5.51
—
These 50mm fascia nails are purpose-made for fixing fascia boards, soffits and UPVC trim where a standard nail head would look out of place. The oversized plastic cap sits flush and neat against the surface, covering the fixing point cleanly without the need for cover caps or additional finishing. If you’ve ever tried to use a plain round wire nail on a soffit board and had it pull through or leave a visible metal dot, you’ll appreciate why these exist.
The plastic head does two jobs. It spreads the load across the board face to reduce the risk of the material cracking or splitting on installation, and it gives a colour-matched finish that blends into the surrounding trim. On white fascia, a white-headed nail is almost invisible once driven home. Same story with the anthracite grey, brown and black options, which cover most of the common UPVC and composite board colours used on domestic and commercial properties today.
Where These 50mm Fascia Nails Get Used
These nails are used daily by roofers, fascia and soffit installers, and general builders fitting out eaves details. They work on UPVC fascia boards, cellular PVC soffit panels, and composite trim boards. The 50mm length gives enough penetration into the rafter foot or timber backing board to hold firmly without bottoming out too short. For most standard fascia and soffit work involving 18–25mm board thickness, 50mm hits the right balance between grip and not punching through the back of the timber.
Colour Matching on Site
Getting the colour right matters more than people expect. A brown-headed nail used on a white fascia sticks out like a scaffolding clip on a listed building. Having the right colour on the van avoids that conversation with the customer at sign-off. White, Brown, Black and Anthracite Grey cover the vast majority of jobs you’ll encounter, and with 100 nails per box the price makes it straightforward to keep all four colours stocked.
These 50mm fascia nails are a small but important part of a tidy eaves installation. The right nail, in the right colour, driven cleanly at the right spacing, is one of those things that separates a professional finish from one that looks like it was done on a Friday afternoon.
Pro Tip: Drive the nail at a very slight downward angle into the fascia board so any water that gets past the head runs away from the fixing rather than tracking into the timber behind.
These plastic headed nails are used primarily for fixing UPVC fascia boards and soffit panels to timber backing boards, rafters and noggins during eaves installation. They are suited to domestic re-roofing work, new-build cladding, and maintenance jobs where existing fascia and soffit boards are being replaced. The colour-matched head makes them appropriate for any situation where the nail head will remain visible on the finished surface rather than being concealed behind a trim strip.
Best For
Fixing UPVC fascia boards
Fixing soffit panels
Composite and cellular PVC trim boards
Eaves installation and roofline work
Domestic and commercial re-roofing
Available In
White
Brown
Black
Anthracite Grey
Key Features
50mm nail length
Oversized plastic cap head
Colour-matched finish
Reduces surface cracking and pull-through
100 nails per box
Suitable for UPVC and composite boards
Not suitable for: Not suitable for structural timber fixing or applications where load-bearing strength is required. The plastic head is not designed for use with a power nailer.
Select the correct colour to match your fascia or soffit board before starting. Drive each nail through the face of the board and into the timber backing using a hammer, keeping the head flush with the board surface. Avoid overdriving, as sinking the plastic head below the surface will crack the cap and leave an unsightly recess.
Space fixings in line with the manufacturer's recommendation for your board type, typically every 300–600mm along the length of the board. On cut ends and joints, fix within 25mm of the edge to prevent the board lifting or bowing over time.
Select the nail colour that matches the fascia or soffit board being fixed.
Position the board correctly against the rafter feet or backing timber before nailing.
Drive the nail through the face of the board at a very slight downward angle.
Strike firmly and squarely to seat the plastic head flush with the board surface.
Avoid overdriving — stop once the plastic head sits flat against the board face.
Space fixings at regular intervals along the board length, and fix within 25mm of any cut ends or joints.
Can these nails be used with a nail gun?
No. These are hand-nailed fixings. The plastic head is not compatible with nail gun collation systems and will crack or shatter if struck with a pneumatic driver. They are designed to be driven with a standard claw hammer.
Which colour should I choose for anthracite UPVC fascia boards?
Choose the Anthracite Grey option. It is specifically included to match the increasingly popular dark grey UPVC fascia and soffit boards used on modern properties. Using a white or brown headed nail on an anthracite board will leave a very visible contrast at every fixing point.
These 50mm plastic headed nails consist of a steel shank with an oversized moulded plastic cap. The plastic head is colour-matched in four standard UPVC roofline colours: White, Brown, Black and Anthracite Grey. The 50mm shank length provides adequate penetration into backing timber when used with standard fascia and soffit board thicknesses between 18mm and 25mm. Supplied in boxes of 100.
Nail Length
50mm
Head Type
Oversized plastic cap
Available Colours
White, Brown, Black, Anthracite Grey
Box Quantity
100
Application
Fascia and soffit fixing
Installation Method
Hand nailed
Colour
Black, Brown, White, Anthracite Grey
Box Quantity
100
Reviews
There are no reviews yet.
Be the first to review “50mm Plastic Headed Nails”Cancel Reply
Reviews
There are no reviews yet.