Jagged Plasterboard Nails – Galvanised

Galvanised jagged plasterboard nails have been fixing plasterboard to timber studwork long before the drywall screw arrived on the scene. They are still widely used today, and for good reason. The jagged, serrated shank bites into the timber as it is driven home, resisting pull-out in a way that a smooth shank nail simply cannot. Whether you are boarding out a stud wall, a ceiling frame, or a partition, these nails get the job done with nothing more than a hammer and a steady hand.

Available in 30 x 2.65mm and 40 x 2.65mm, both sizes suit standard plasterboard thicknesses. The 30mm is typically used with 9.5mm board, while the 40mm is the go-to for 12.5mm plasterboard. The galvanised coating provides medium duty rust protection, which is more than adequate for interior drylining applications where the nails will be behind plaster and paint. These nails conform to Eurocode 5 and carry a Fire Classification of A1, so they are suitable for use in fire-rated partition systems where the specification calls for non-combustible fixings.

Why Tradespeople Still Reach for Galvanised Jagged Plasterboard Nails

Speed is a genuine factor. An experienced boarder with a hammer can nail off a sheet faster than a screwdriver allows, particularly on ceiling work where you want both hands free for as little time as possible. There is no pilot hole, no bit changes, no stripping. You either hit it or you miss it, and most tradespeople have stopped missing by the second board. The jagged shank means the nail is not going anywhere once it has been driven flush, which matters on ceilings where vibration is a factor over time.

Bulk options go right up to 25kg cartons, which makes these practical for larger boarding contracts where running out of fixings halfway through a room is not an option. The TIMbag format is handy for smaller jobs or when you want a consistent pour into a nail bag without the mess of a full carton. Simple product, sensible options.