Six-piece Bahco pro wood chisel set covering 6mm to 32mm, with split-proof acetate handles and best-in-category steel blades. Supplied in a wooden storage case. Fully resharpenable and built to last a working lifetime.
A decent wood chisels set is one of those things you only want to buy once. Bahco’s six-piece pro set is built with that in mind — the blades are made from best-in-category steel, ground to a proper edge from the factory, and can be resharpened as many times as you need. These are not disposable chisels. They are the kind you hand down when you retire, assuming you don’t lose one first.
The handles are acetate with a guaranteed split-proof construction. That matters if you’re driving them with a mallet, which is most of the time. Plastic handles that crack or chip are a genuine irritant on site, and Bahco have clearly designed these with that frustration in mind. The balance between handle and blade feels right, and the handles are comfortable across long sessions of paring or chopping.
What’s in the Bahco 6 Piece Wood Chisels Set
The set covers the six sizes you’ll actually reach for: 6mm (1/4in), 10mm (3/8in), 12mm (1/2in), 18mm (3/4in), 25mm (1in), and 32mm (1-1/4in). That range handles almost everything from fine joinery work and mortise cleaning to general woodworking and fitting tasks. The 12mm and 18mm will probably see the most action, but having the full spread means you’re not improvising with the wrong chisel, which never ends well.
Supplied in a Wooden Case
The set comes in a wooden storage case, which keeps the blades protected and the set together. It’s a proper case worth keeping rather than a flimsy plastic tray that cracks in the van. Whether you store it in your toolbox or on the bench, the chisels sit securely and don’t rattle about. A wood chisels set presented this way also makes it a sensible gift for anyone starting out in carpentry or joinery.
Available at Discount Trade Supplies with free next day delivery on qualifying orders.
Pro Tip: Hone the bevel on a leather strop after every session rather than waiting until the edge is visibly dull — it takes 30 seconds and keeps the steel in far better condition over the long term.
These chisels are used across carpentry, joinery, shopfitting, and general construction work. They handle mortise and tenon preparation, hinge recessing, dovetail cleaning, and timber paring with equal confidence. Joiners fitting door frames and cabinet makers finishing joints will both find the full size range useful. They work across hardwoods and softwoods alike, and the 32mm chisel is particularly handy for cleaning out wider housings or rebates.
Best For
Mortise and tenon joinery
Hinge recessing
Dovetail cleaning
Timber paring and fitting
General carpentry and shopfitting
Works With
Softwoods
Hardwoods
Engineered timber
Wooden mallet or hammer
Key Features
Best-in-category steel blades
Fully resharpenable
Split-proof acetate handles
Sizes: 6mm, 10mm, 12mm, 18mm, 25mm, 32mm
Supplied in wooden storage case
Not suitable for: Not intended for use on masonry, metal, or other non-timber materials. Using these as pry bars or screwdrivers will not end well for the blade, the handle, or your mood.
Before first use, check the bevel edge and touch it up on a sharpening stone if needed — factory edges are decent but a quick hone makes a real difference. When chopping mortises or recesses, work with a mallet rather than hammering directly on the handle. The acetate handles are impact-rated, but controlled mallet work gives better results and protects the chisel.
For paring, use hand pressure only. Keep the bevel down for chopping and bevel up for fine paring. Clean the blade between tasks and store in the case to protect the edges.
Select the correct chisel size for the joint or recess you are cutting
Mark out the area clearly with a marking knife or pencil before cutting
For chopping work, secure the timber and use a wooden mallet with controlled strikes
Work in stages rather than trying to remove all material in one pass
For paring, apply hand pressure only and keep cuts shallow and controlled
Check fit regularly against the workpiece to avoid overcutting
Clean the blade after use and return to the wooden case for storage
Resharpen on a whetstone when the edge begins to drag rather than cut cleanly
Are the blades resharpenable at home or do they need specialist equipment?
They can be resharpened at home on a standard sharpening stone or whetstone. A basic honing guide helps maintain the correct bevel angle, but experienced joiners will freehand it without any trouble. The steel responds well to sharpening and holds an edge reliably.
Can these be used with a wooden mallet?
Yes, the split-proof acetate handles are designed to take mallet blows. A wooden or rubber mallet is the right tool for chopping work. Avoid using a metal hammer directly on the handle as it may damage the top over time, even with impact-rated handles.
Is the wooden case sturdy enough for site use?
It is a proper wooden case rather than a lightweight plastic tray, so it offers reasonable protection in a toolbox or on a workbench. It is not designed to be thrown around a van, but for storage and transport when looked after it holds up well and keeps the blades from contact with other tools.
The blades are manufactured from high-grade steel, heat-treated for edge retention and ground to a consistent bevel angle. Handles are acetate construction, chosen for its impact resistance and resistance to splitting under mallet use. The six-size range spans 6mm to 32mm, covering the most common requirements in carpentry and joinery applications. Bahco is a Snap-on brand with a long-standing reputation in professional hand tools.
Brand
Bahco
Set Size
6 piece
Chisel Sizes
6mm, 10mm, 12mm, 18mm, 25mm, 32mm
Blade Material
High-grade steel
Handle Material
Split-proof acetate
Resharpenable
Yes
Storage
Wooden case
SKU
chisel6-bahco
Reviews
There are no reviews yet.
Be the first to review “Bahco pro wood chisel set – 6 piece”Cancel Reply
Reviews
There are no reviews yet.