CT1 Power Grab N Bond Adhesive

CT1 Power Grab N Bond Adhesive is a heavy-duty hybrid polymer adhesive built around the same base chemistry as the original CT1 sealant and adhesive. The formulation is significantly denser than standard construction adhesives, which is what gives it the immediate grab that sets it apart from most products in this category. On site, that means less propping, fewer supplementary fixings, and a noticeably faster workflow.

The product was originally developed for facade bonding, specifically to replace the two-part epoxy systems traditionally used to adhere marble and granite slabs to block walls. Those epoxy methods brought problems: inconsistent mixing leading to bond failure, long cure windows of 24 to 72 hours, and the need to mechanically tie each slab while the adhesive set. CT1 Power Grab N Bond removes all of those complications in one go.

What CT1 Power Grab N Bond Adhesive Bonds

The material compatibility list is genuinely broad. CT1 Power Grab N Bond adheres reliably to stone, granite, marble, concrete, Ytong (aerated blocks), all metals including alloys, polystyrene, and most plastics. It handles mixed-material bonds just as well, so bonding stainless steel to stone, wood to concrete, or metal to polystyrene is not a problem. That combination of material range and high initial grab makes it useful well beyond facade work.

Roofers, glaziers, kitchen fitters, shopfitters and general builders all use CT1 Power Grab N Bond where speed and strength matter and where drilling or additional mechanical fixing is either impractical or simply unnecessary. If you’re fixing heavy cladding, mounting architectural features, bonding worktop upstands, or installing heavy mirrors and panels, this is the kind of adhesive that earns its place on the van.

Labour Time Reduction

CT1 claim that Power Grab N Bond reduces labour time by at least 50% in the majority of applications. That figure is plausible when you consider the alternative: mixing two-part epoxies correctly, waiting for an extended cure, and having someone hold or prop the material in position for hours. With Power Grab N Bond, the fast initial grab holds the substrate in place almost immediately, and the rapid cure means the bond is effective long before most epoxy systems have fully hardened.

CT1 Power Grab N Bond Adhesive is dispensed from a standard cartridge using a skeleton or sausage gun, so there’s no specialist equipment required. Clean hands before the product skins, keep the nozzle capped between uses, and store at room temperature. Like all CT1 hybrid polymer products, it cures by reacting with atmospheric moisture, so it performs well even in damp conditions, which is more than can be said for most two-part alternatives.