Isolating Valve – 15mm – WRAS Approved
£0.99£1.19 EX VATINC VAT
A 15mm WRAS approved isolating valve for shutting off water supply to individual appliances and fittings. Quarter-turn operation, suitable for potable water systems throughout domestic and light commercial plumbing.
A WRAS isolation valve rated for 15mm pipework is one of those fittings that earns its keep long after it’s been forgotten behind a kitchen unit. Fit it once, and the next time a tap seat fails or a washing machine starts misbehaving, you can isolate the supply in seconds without hunting for the main stopcock. This 15mm WRAS isolation valve meets Water Regulations Advisory Scheme approval, which means it’s tested and certified for use on potable water supplies in the UK. That matters if you’re working on properties that require compliance sign-off, or simply if you want fittings you can stand behind.
Quarter-turn operation is standard on valves like this. One flat-blade screwdriver twist takes it from fully open to fully closed, with the slot indicating direction at a glance. No ambiguity, no partial closures left by accident. The 15mm size makes it the go-to for the majority of domestic supply pipework, fitting neatly inline on copper, and compatible with most compression fittings in standard use.
Where WRAS Isolation Valves Get Used
These valves show up almost everywhere in domestic plumbing. Under sinks and basins, they give you a convenient local isolation point without turning off the whole house. Behind toilets, they’re practically mandatory on any installation worth doing properly. On washing machine and dishwasher feeds, they let the appliance be swapped out without drama. Plumbers often fit them as a matter of course on every appliance connection, and it’s hard to argue with that approach.
WRAS Approval and Why It Matters
WRAS approval isn’t just a badge. It confirms the valve materials won’t contaminate the drinking water passing through them, and that the fitting performs reliably under normal mains pressure conditions. Many local water authorities and building inspectors will expect to see WRAS-approved fittings on potable supplies, particularly on new installations and remedial work requiring sign-off. Fitting a non-approved valve to save a few pence is rarely worth the conversation it starts later.
At under a pound each, these are the kind of fitting you stock up on rather than order per job. Keep a handful in the van and you’ll never be caught short on a straightforward service call.
Pro Tip: When fitting these inline, orient the valve so the slot head faces outward and is accessible without removing pipework covers, otherwise you'll have the next plumber dismantling a cabinet just to turn off a tap feed.
You may also like…

Lever Ball Valves – Blue, Red, Yellow or Black Handle
From £2.98£3.58 EX VATINC VAT Select options This product has multiple variants. The options may be chosen on the product page






Reviews
There are no reviews yet.