Sealey 30″ industrial drum fan with 2-speed motor, 360° tilt function and a maximum airflow of 283.4m³/min. Heavy-duty steel construction built for continuous use in workshops, warehouses, agricultural buildings and commercial sites.
Can’t find it? We’ll source it.
No worries! We can usually get this in for next-day delivery or source an alternative. Drop your email and we’ll get straight back to you with options.
Nice one — request received. Check your email to confirm, and we’ll get pricing and availability over to you.
Out of stock
The Sealey HVF30S is a 30″ industrial drum fan designed to shift serious volumes of air. With a maximum airflow of 283.4m³/min (10,008 CFM), this is the kind of kit you reach for when a pedestal fan simply isn’t going to cut it. Whether you need to cool a large workshop, ventilate a confined space or keep air circulating in a busy warehouse, this industrial drum fan does the job without fuss.
The 2-speed motor gives you a degree of control depending on conditions. Run it at full tilt when you need maximum throughput, or drop to the lower setting when you want steady background circulation without creating a wind tunnel. Both speeds deliver meaningful airflow at this size, so there’s no point pretending the low setting is subtle.
Sealey HVF30S Drum Fan: Build and Handling
The casing, guard and frame are all heavy-duty gauge steel. On a busy site or in a working agricultural shed, that matters. Plastic-bodied fans get knocked, cracked and written off. This one is built to take the odd bump and keep running. The blades are carefully balanced and fully enclosed within the guard, which keeps fingers out and reduces the chance of debris getting pulled through during operation.
The 360° tilt function is one of the more useful features here. You can direct airflow anywhere on a full vertical axis, so whether you need air blowing horizontally across a workshop floor or angled upward to push heat away from a ceiling, the fan positions easily. It locks into place once set, so you’re not constantly readjusting it mid-job.
The unit comes fitted with a standard 3-pin plug and runs on 230V, so no special wiring is needed. Plug it in and it works. There’s something to be said for that on a busy site where nobody has time to faff around with electrical installations just to get some air moving.
Who This Fan Is Built For
Sealey designed the HVF30S for industrial and commercial environments where high airflow over extended periods is needed. That covers automotive workshops and vehicle showrooms where paint fumes and heat need shifting, agricultural buildings where ventilation directly affects animal welfare, large warehouses and distribution centres, and construction sites where enclosed spaces need air pushed through them before trades can work safely. It is equally at home in a factory unit or a large marquee event setup where air circulation matters.
At 30″ with a steel build and genuine industrial airflow figures, the Sealey HVF30S industrial drum fan sits comfortably at the heavier end of the workshop fan market. It is not a unit you move between jobs every day, but on a fixed installation or a longer-term site setup, it earns its place quickly. The kind of fan that gets pointed at something and left to get on with it.
Pro Tip: When positioning the HVF30S for ventilation rather than cooling, angle the fan to push air toward the nearest exit point rather than blowing across the space, which significantly improves air change rate and clears fumes or humidity far more effectively.
The HVF30S is used wherever large volumes of air need to be moved continuously. In automotive workshops it shifts paint fumes and solvent vapours, keeping conditions safe and drying times consistent. Agricultural buildings use fans like this to maintain air quality for livestock and prevent moisture build-up in hay and feed stores. Warehouses and distribution centres rely on drum fans to keep temperatures manageable during summer months without the running costs of full air conditioning.
Construction sites use them to ventilate enclosed areas before and during trades work, particularly in basement conversions, large commercial refurbishments and newly plastered buildings that need drying out. Vehicle showrooms, sports halls, factories and large event spaces are all typical environments for a 30" industrial drum fan of this output.
Best For
Automotive workshops and spray shops
Agricultural and livestock buildings
Warehouses and distribution centres
Construction site ventilation
Vehicle showrooms
Factories and industrial units
Large event and marquee spaces
Key Specifications
Blade diameter: 30"
Maximum airflow: 283.4m³/min (10,008 CFM)
2-speed motor
360° tilt function
Supply voltage: 230V
Fitted 3-pin plug
Heavy-duty gauge steel casing and guard
Key Features
Full 360° tilt for directional airflow control
Fully guarded and balanced blades
Heavy-duty steel frame and casing
Plug and play 230V operation
Suitable for continuous industrial use
Not suitable for: Not suitable for domestic or residential use where noise levels would be an issue. This fan moves air at industrial volumes and is not designed for quiet background use in offices or retail environments.
Position the fan on a flat, stable surface with adequate clearance around the guard. Use the 360° tilt to direct airflow where it is needed, whether that is horizontally across a floor, angled upward toward a ceiling or directed toward a specific ventilation point. Lock the tilt in place before switching on.
Select the appropriate speed for the job. Use the higher speed for maximum ventilation or rapid cooling and the lower speed for sustained background air circulation. For ventilation applications, position the fan to push air toward an exit point rather than simply recirculating it within the space. Keep the guard clear of obstructions and check periodically that nothing has been drawn up against it during operation.
Place the fan on a flat, stable surface in the area requiring ventilation or cooling
Ensure adequate clearance around the guard on all sides
Adjust the 360° tilt to the required airflow direction
Lock the tilt position securely before connecting power
Plug into a 230V supply using the fitted 3-pin plug
Select the appropriate speed using the 2-speed control
For ventilation, position airflow toward the nearest exit or extraction point
Check the guard periodically during use to ensure it remains clear of obstructions
Does the HVF30S need any special electrical supply or wiring?
No. It runs on standard 230V and comes fitted with a 3-pin plug, so you can connect it to any standard UK socket. No specialist wiring or installation is required.
Can the fan be used outdoors or in damp conditions?
The HVF30S is designed for industrial indoor use. It is not rated for outdoor exposure or wet environments. Using it in conditions where it could be exposed to rain or standing water is not recommended and could be dangerous.
How loud is the fan at full speed?
At 30" and maximum airflow, this is a working industrial fan and generates significant noise. It is appropriate for workshops, warehouses and agricultural buildings where background machinery noise is normal. It is not suited to environments where low noise levels are required.
The HVF30S uses a 2-speed electric motor driving 30" balanced steel blades enclosed within a heavy-duty gauge steel guard and frame. Maximum airflow is rated at 283.4m³/min (10,008 CFM). The 360° tilt mechanism allows full vertical axis adjustment of the airflow direction. The unit operates on 230V single-phase supply and is supplied with a fitted 3-pin plug for immediate use.
Brand
Sealey
Model
HVF30S
Blade Diameter
30"
Maximum Airflow
283.4m³/min (10,008 CFM)
Motor Speeds
2
Tilt Function
360°
Supply Voltage
230V
Plug Type
3-pin UK plug fitted
Casing Material
Heavy-duty gauge steel
Guard Material
Steel
Reviews
There are no reviews yet.
Be the first to review “Sealey Industrial High Velocity Orbital Drum Fan 30″ 230V”Cancel Reply
Reviews
There are no reviews yet.