The Spear & Jackson Predator 22 inch hand saw cuts timber, chipboard, hardboard and MDF with a thick, rigid blade that stays straight under pressure. Duralife hardpoint technology, a comfortable Sure-Grip handle, and a 10-year guarantee back it up.
Trade QTY discounts — the more you buy, the more you save
Quantity
Discount
You Save
Price/unit
Buy 10+
£0.50£0.60
6.7% off
£6.99£8.39
Discount applies across all variants of this product.
The Spear & Jackson Predator Universal Saw is one of those tools that earns its place in a tool bag very quickly. At 22 inches with 8 teeth per inch, the spear and jackson 22 inch predator saw is built for general purpose cutting across a wide range of common materials. Timber, chipboard, MDF, hardboard — it handles the lot without complaint.
The blade is 0.91mm thick, which is noticeably more rigid than cheaper saws. That extra thickness isn’t just a spec on paper. On a long cut through a sheet of MDF, a flimsy blade starts to wander and vibrate, and what should be a clean line ends up drifting. The Predator stays put. Less whip means more control, especially when you’re tired and working at an awkward angle on site.
What Makes the Predator Saw Worth Carrying
Spear & Jackson use their Duralife hardpoint technology on this saw, which they claim gives it at least 20% more lifespan than comparable hardpoint saws from competitors. Hardpoint teeth are heat-treated to hold an edge much longer than standard teeth — the trade-off is that they can’t be resharpened, but at this price point that’s hardly a concern. When it’s done, you replace it and get on with the job.
The Sure-Grip handle is genuinely comfortable to use over long periods. It’s shaped to fit the hand properly, with a finger guide that helps keep the saw aligned at the start of a cut — which is where most people lose accuracy. It might seem like a small detail, but starting a cut cleanly makes everything that follows easier.
The 10-Year Guarantee
Spear & Jackson back the Predator with a 10-year manufacturer guarantee. For a hand saw at this price, that’s a statement of confidence in the build. It’s the kind of reassurance that matters when you’re buying tools to use daily rather than once in a blue moon.
At £7.49, this is a serious working tool at a price that makes sense to keep a spare in the van.
Pro Tip: Start every cut with two or three slow back-strokes to score a shallow kerf before applying forward pressure — it stops the blade jumping on chipboard and MDF edges and gives you a clean, accurate start without a guide.
The Predator Universal Saw is used across general construction, carpentry, joinery, and site work wherever a quick, clean cut through sheet material or timber is needed. It's a common choice for cutting stud work, trimming skirting boards, sizing MDF shelving, and cutting chipboard flooring to length. Joiners, first-fix carpenters, and general builders tend to keep one on hand as a reliable day-to-day saw.
It's equally useful in workshop settings for lighter cutting tasks and for tradespeople who need a dependable hand saw without reaching for a power tool every time.
Best For
General timber cutting
MDF and sheet materials
Chipboard and hardboard
Joinery and first-fix carpentry
Site and workshop use
Key Specifications
Blade length: 22 inch
Teeth per inch: 8 TPI
Blade thickness: 0.91mm
Hardpoint teeth (Duralife technology)
10-year manufacturer guarantee
Key Features
Duralife hardpoint technology for extended blade life
Thick rigid blade reduces whip and vibration
Sure-Grip ergonomic comfort handle
Finger guide for accurate cut starts
Universal cross and rip cutting capability
Not suitable for: Not suitable for cutting metals, plastics, or masonry. Hardpoint blades cannot be resharpened, so once the teeth are worn the blade needs replacing.
For best results, mark your cut line clearly and use the finger guide on the handle to position the blade accurately before starting. Begin with light back-strokes to score a starting kerf, then apply steady forward pressure using the full length of the blade. Let the saw do the work — forcing it through will slow you down and wear the teeth faster.
When cutting sheet materials like MDF or chipboard, support the offcut side to prevent it breaking away near the end of the cut and tearing the face.
Mark the cut line clearly using a pencil and square
Position the blade on the waste side of the line with the finger guide resting against your thumb for alignment
Start with two or three slow back-strokes to create a shallow kerf
Apply smooth, consistent forward strokes using the full length of the blade
Support the offcut near the end of the cut to prevent it breaking away
Store the saw with the blade protected to preserve the hardpoint teeth
Can the Predator saw be used to cut both with and across the grain?
Yes. The Predator is a universal saw, meaning it's designed to handle both rip cuts along the grain and cross cuts across it. At 8 TPI it sits in a sensible middle ground — fine enough for a reasonable finish, fast enough for general site work. It won't replace a dedicated fine-tooth tenon saw for joinery finishing, but for most everyday cutting tasks it does the job cleanly.
Can the hardpoint blade be resharpened when it goes blunt?
No. Hardpoint teeth are heat-treated to hold an edge longer than conventional teeth, but that process makes them too hard to sharpen with a file. When the blade is worn, you replace it. Given the price and the Duralife longevity claim, most tradespeople find this a fair trade-off.
The Predator uses hardpoint technology with heat-treated teeth that resist wear significantly longer than standard saw teeth. The 0.91mm blade thickness is above average for a hand saw in this class, providing meaningful stiffness that reduces lateral flex during a cut. The Sure-Grip handle is made from a hard-wearing polymer with an ergonomic profile shaped for extended use. The saw carries a 10-year manufacturer guarantee from Spear & Jackson.
Brand
Spear & Jackson
Model
Predator Universal Saw
Blade Length
22 inch
Teeth Per Inch
8 TPI
Blade Thickness
0.91mm
Tooth Type
Hardpoint (Duralife technology)
Handle Type
Sure-Grip ergonomic with finger guide
Guarantee
10-year manufacturer guarantee
Suitable Materials
Timber, MDF, chipboard, hardboard
Reviews
There are no reviews yet.
Be the first to review “Spear and Jackson Predator Universal Saw – 22 Inch”Cancel Reply
Reviews
There are no reviews yet.