Starrett 3X Power Demolition Reciprocating Saw Blades 150mm 6-10tpi Pk5
SKU: SA2719826
Categories: Demolition Reciprocating Saw Blades, Metal Cutting - Bi-Metal Reciprocating Saw Blades, Power Tool Blades, Wood & Metal Cutting Bi-Metal Reciprocating Saw Blades
Tag: reciprocating
Brand: Starrett
£10.96£13.15 EX VATINC VAT
Starrett 3X Power bi-metal reciprocating blades, 152 x 27 x 1.60mm, 6-10tpi. Built for heavy-duty demolition and emergency extrication. Up to three times the blade life of previous Starrett lines. Pack of 5.
The Starrett 150mm 6-10tpi demolition saw blade is part of the 3X Power King Cut range, and these are not blades you buy because they look good on a shelf. They are built for the kind of work that chews through ordinary bi-metal blades in an afternoon. Think embedded nails, mixed timber, plasterboard with hidden fixings, or structural work where you genuinely do not know what the blade is going to hit next.
Starrett’s 3X Power technology is a meaningful step up from their previous generation. Up to three times the blade life and noticeably faster cutting rates are the headline claims, and the design backs that up. The body is thicker than a standard reciprocating blade, which reduces flex and gives you much better control when you are working at an angle or pushing hard into dense material. At 152 x 27 x 1.60mm, there is real mass behind each cut.
What Makes the Starrett 3X Power Demolition Blade Different
The 6-10tpi variable tooth pitch is the key detail here. A fixed pitch blade will resonate at a specific frequency and that vibration travels straight up your arms. Variable pitch disrupts that pattern, which means less fatigue over a long shift and a cleaner cut profile. On demolition work that might not sound important, but after a few hours it absolutely is.
The teeth themselves are set aggressively. These blades are designed to rip, not to finish. If you need a clean edge for a joinery fit, this is not your blade. If you need to get through a stud wall, a cut-out around a pipe, or a door frame that needs to come out yesterday, these will do it faster and last longer than cheaper alternatives.
Emergency Extrication Use
The King Cut range is also specified for emergency extrication, which tells you something about the structural integrity of the blade under stress. They are built to keep cutting when the material fights back, without the blade folding or snapping at an inconvenient moment.
Pack of 5 means you have spares on the job without paying over the odds. At this price point, it is worth keeping a pack in the van.
Pro Tip: Variable pitch blades like this 6-10tpi cut more efficiently when you let the tool do the work rather than forcing it, steady forward pressure without leaning into it will keep the teeth cutting cleanly and extend blade life significantly.
These blades are at home on demolition sites, strip-outs, and refurbishment projects where mixed materials are the norm rather than the exception. They handle timber, hardwood, soft metals, plasterboard, and nailed or screwed assemblies without needing a blade change mid-job. Roofers cutting through battens, builders removing stud walls, and groundworkers dealing with old framework will all find these a practical choice. Emergency services also use the King Cut range for extrication work, which should give a good indication of how these perform under real pressure.
Best For
- Heavy-duty demolition
- Strip-out and refurbishment
- Mixed material cutting
- Emergency extrication
- Embedded nail cutting
- Structural timber removal
Compatible With
- Standard reciprocating saws
- Bosch, DeWalt, Milwaukee, Makita reciprocating saws
- Universal shank fitting
- Cordless and corded recip saws
Key Specifications
- Blade length: 150mm (152mm nominal)
- Width: 27mm
- Thickness: 1.60mm
- Tooth pitch: 6-10tpi variable
- Bi-metal construction
- 3X Power extended life technology
- Pack of 5
Not suitable for: Not suitable for fine finish cuts or precision joinery work where a clean edge is required. Not designed for cutting hard ceramics, masonry or glass.
Fit the blade to your reciprocating saw using the standard shank and ensure it is fully seated before switching on. Let the blade reach full speed before contacting the material. Apply steady, consistent forward pressure rather than forcing the blade, particularly in mixed or unknown materials where resistance can change suddenly.
On demolition work, score the cut line lightly first if accuracy matters. For ripping through bulk material, simply guide the saw and let the variable pitch teeth do the work. When cutting near fixings or embedded metal, slow the stroke rate slightly to reduce the chance of tooth stripping. Change the blade before it becomes fully blunt, as a worn blade generates more heat and puts unnecessary strain on the saw motor.
- Ensure the reciprocating saw is switched off and unplugged or battery removed before fitting the blade
- Insert the blade shank fully into the saw's blade clamp and confirm it is locked securely
- Select your cut line and where possible mark it clearly on the material
- Bring the blade to full speed before making contact with the material
- Apply firm, steady forward pressure and let the variable pitch teeth cut at their own rate
- Reduce feed pressure when cutting through areas where hidden fixings or mixed materials may be present
- Allow the blade to cool briefly between extended cuts to maintain tooth life
- Replace the blade when cutting speed noticeably drops or teeth appear rounded
Will these blades fit my reciprocating saw?
Yes. Starrett 3X Power blades use a standard universal shank that is compatible with all major reciprocating saw brands including Bosch, DeWalt, Milwaukee, Makita and most others. If your saw accepts standard recip blades, these will fit.
What materials can the 6-10tpi variable pitch blade cut through?
The 6-10tpi pitch is well suited to timber including nailed and screwed assemblies, sheet materials, thin to medium section steel, aluminium, and mixed demolition materials. It is not the right choice for masonry, ceramics, or situations where a clean finish cut is needed.
Constructed from bi-metal, these blades combine a high-speed steel tooth edge with a flexible alloy steel body. The 3X Power designation reflects Starrett's updated tooth geometry and body thickness specification, engineered to extend working life and cutting speed compared to their standard range. At 1.60mm body thickness with a 27mm width, the blade resists lateral flex under heavy load. The variable 6-10tpi pitch reduces harmonic vibration during the cut.
| Blade Length | 150mm (152mm nominal) |
|---|---|
| Blade Width | 27mm |
| Blade Thickness | 1.60mm |
| Tooth Pitch | 6-10tpi variable |
| Construction | Bi-metal |
| Shank Type | Universal |
| Application | Demolition, heavy-duty cutting |
| Pack Quantity | 5 |
| Brand | Starrett |
| Range | 3X Power King Cut |
Be the first to review “Starrett 3X Power Demolition Reciprocating Saw Blades 150mm 6-10tpi Pk5”Cancel Reply
You may also like…

TIMCO Zero Degree Mitre Saw Blades
From £14.12£16.94 EX VATINC VAT
PCD Fibre Cement Saw Blades – DART
From £28.95£34.74 EX VATINC VAT
PCD Fibre Cement Saw Blades – TIMCO
From £32.67£39.20 EX VATINC VAT
Related products

Demolition Cobalt Metal Reciprocating Saw Blade – 150mm 9 TPI – Pack of 3
£13.75£16.50 EX VATINC VAT
Mixed Jigsaw Blade Set 20pc – Wood & Metal Cutting – High Carbon Steel & HSS Blades – Large
£8.74£10.49 EX VATINC VAT
Jigsaw Blades – Metal Cutting – HSS Blades – T118G
£2.58£3.10 EX VATINC VAT
Demolition Cobalt Metal Reciprocating Saw Blade – 225mm 9 TPI – Pack of 3
£17.95£21.54 EX VATINC VAT

Reviews
There are no reviews yet.