Talon masonry nail pipe clips secure plastic or copper pipework directly to brick and blockwork without plugging or drilling. Available in sizes from 7/8mm up to 28mm in white, red, and blue colour options. Sold in boxes of 20 or 100.
Size
QTY
Price
QTY
15mm Red
20
£1.53£1.84
22mm Red
20
£1.64£1.97
7 8mm white
100
£2.96£3.55
10 12mm white
100
£3.29£3.95
15mm white
100
£5.82£6.98
22mm white
100
£6.59£7.91
28mm WHITE
100
£8.02£9.62
15mm Blue
20
£1.53£1.84
22mm Blue
20
£1.64£1.97
15mm Red
100
£5.82£6.98
22mm Red
100
£6.59£7.91
15mm Blue
100
£5.82£6.98
22mm Blue
100
£6.59£7.91
Talon masonry nail pipe clips are a straightforward fixing solution for securing pipework to brick, block, and concrete surfaces. The clip and nail arrive as a single unit, so there is no drilling, no plugging, and no separate fastener to lose down the back of a van. A single strike with a hammer drives the hardened steel nail directly into the masonry and the pipe is held firmly in place. These are the masonry nail pipe clips that most plumbers and heating engineers reach for when speed matters on site.
The clips are made from rigid plastic and are available in white, red, and blue colour options across the range. Red and blue are the standard colour-coding used to distinguish hot and cold water services, which makes them a practical choice for installations where the pipework needs to be identifiable at a glance. White clips are the general-purpose option where colour coding is not required.
Where Talon Masonry Nail Pipe Clips Are Used
These clips are used across domestic and light commercial plumbing and heating installations. They suit first-fix and second-fix situations wherever pipe runs need to be fixed back to solid masonry walls. Because there is no pre-drilling required, they are notably quicker to install than traditional screw-fixed clips, particularly on long pipe runs across brick or blockwork where the time saved adds up quickly.
Talon masonry nail pipe clips are available in sizes covering 7/8mm, 10/12mm, 15mm, 22mm, and 28mm pipe diameters, making them compatible with the full range of common domestic pipework including microbore, standard copper, and plastic push-fit systems. Boxes of 20 suit smaller jobs or top-up stock, while the box of 100 is the sensible choice for any job with a serious length of pipe to fix.
Pro Tip: On harder engineering brick or dense block, give the nail a firm, straight strike rather than a series of light taps — a hesitant approach tends to bend the nail before it gets purchase.
Talon masonry nail pipe clips are used by plumbers and heating engineers to fix pipework to brick, block, and concrete walls in domestic and light commercial buildings. They are suitable for first-fix installations where pipe runs are being secured before plastering or boxing in, as well as second-fix work on exposed pipework. The colour-coded options in red and blue make them a natural fit for installations where hot and cold services run in parallel and need to be clearly distinguishable.
Best For
Securing pipework to brick and blockwork
Domestic plumbing and heating installations
First-fix and second-fix pipe runs
Hot and cold service colour coding
Available In
7/8mm White
10/12mm White
15mm White, Red, Blue
22mm White, Red, Blue
28mm White
Boxes of 20 or 100
Key Features
Hardened steel masonry nail
No drilling or plugging required
Single-piece clip and nail unit
Colour-coded options for hot and cold services
Rigid plastic clip body
Not suitable for: Not suitable for fixing to timber stud walls, plasterboard, or any surface that cannot accept a masonry nail. Not recommended for outdoor exposed applications where long-term UV exposure and weathering is a concern.
Talon masonry nail pipe clips require no preparation beyond positioning. Hold the clip against the masonry at the desired fixing point with the pipe seated in the saddle, then drive the nail home with a hammer. A firm, direct strike is all that is needed on standard brick or block.
Space clips at regular intervals along the pipe run in line with standard support spacing guidance for the pipe material and diameter being used. On longer runs, start from one end and work along to keep the pipe aligned before nailing off each clip.
Select the correct clip size for the pipe diameter being fixed.
Choose the appropriate colour for the service: red for hot, blue for cold, white where colour coding is not required.
Position the clip against the masonry wall with the pipe seated correctly in the saddle.
Hold the clip firmly in place and drive the masonry nail with a hammer using a single confident strike.
Check the clip is flush against the wall and the pipe is secure before moving to the next fixing point.
Continue along the pipe run at appropriate support intervals until the run is fully clipped.
Can these clips be used on lightweight aerated blocks?
Talon masonry nail pipe clips will fix into aerated blocks such as Thermalite or Celcon, but holding strength will be lower than in dense brick or concrete. For critical or load-bearing pipe support on aerated block, a screw-fixed clip with a suitable plug is the more reliable option.
Are the red and blue clips structurally the same as the white ones?
Yes. The colour is purely for identification purposes. Red, blue, and white clips of the same size are identical in terms of their clip body and nail, so there is no difference in fixing performance between them.
Talon masonry nail pipe clips consist of a rigid plastic saddle clip with an integral hardened steel masonry nail. The nail is designed to penetrate standard brick, block, and concrete without requiring a pre-drilled pilot hole. The plastic body supports the pipe without crushing and holds it securely against the wall surface. Available in sizes from 7/8mm to 28mm to cover the range of common domestic pipe diameters.
Brand
Talon
Available Sizes
7/8mm, 10/12mm, 15mm, 22mm, 28mm
Colour Options
White, Red, Blue (colour availability varies by size)
Reviews
There are no reviews yet.