TiMCO C2 TORX Clamp-Fix Screws – Boxes

TiMCO C2 Torx screws are a serious step up from your standard woodscrew. Designed specifically for timber-to-timber connections, the C2 Clamp-Fix addresses one of the most common problems in structural timber work: jacking. That’s where the screw pulls the top piece of timber upward instead of clamping it down tight. The C2’s dual angle thread stops that from happening, drawing the timbers together and holding them firm.

The patented twin-cut point picks up quickly, drives cleanly, and significantly reduces the risk of timber splitting, even near edges or end grain where most screws cause trouble. If you’re fixing deck frames, floor joists, stud work, or any structural timber application, this is the kind of screw that earns its place in the bag.

What Makes the TiMCO C2 Torx Screw Different

A high-molecular polymer lubricant coating does two things well. First, it reduces insertion torque by up to 52% compared to an uncoated screw, which matters when you’re driving hundreds in a day. Second, it provides rust protection up to 20 times greater than standard zinc plating, making these suitable for applications where moisture exposure is a concern.

The TX Torx drive recess is precision-formed to prevent cam-out. Anyone who has slipped off a Pozidriv head and gouged a joist will appreciate that. The ribs under the head improve countersinking and leave a smooth, flush finish without splitting the surface material. From 40mm upwards, the screws are partially threaded, which improves clamping performance further by ensuring the shank in the upper timber doesn’t bite and resist pull-down.

Available in sizes from 3.0 x 12mm right through to 8.0 x 420mm, and in box quantities to suit smaller jobs or full-site use, the TiMCO C2 Torx Clamp-Fix is a screw you can rely on to do exactly what it’s supposed to do. Every time.