Timloc clip fit plastic access panel in white. Used in residential and commercial projects to provide neat, removable access to concealed plumbing, electrical and building services. Simple clip installation, no tools required.
Available options and pricing for Timloc Access Panel - Plastic - Clip Fit - White, with quantity selectors and a running total
Size
SKU
Price
QTY
Total
100mm x 150mm
LOCAP110
£5.51£6.61
—
190mm x 190mm
LOCAP200
£9.55£11.46
—
The Timloc white plastic access panel gives you clean, unobtrusive access to whatever is lurking behind your walls or ceilings. Plumbing isolation valves, electrical junction boxes, soil pipe connectors — all the things that need to exist but nobody wants to look at. This timloc white plastic access panel solves that problem without making the wall look like an afterthought.
Clip fit means exactly what it says. The panel clips into a pre-cut aperture in plasterboard, tile backer board or similar sheet materials. No screws, no fixings, no fiddling around with a drill in a cupboard. The frame locates into the opening and the door clips shut flush against the surface. That said, the opening still needs to be cut cleanly and accurately — a poorly cut hole will show around the edges regardless of how good the panel is.
Where Timloc Plastic Access Panels Get Used
These panels are a standard item on most domestic plumbing and electrical fit-outs. Plumbers will often fit them above bath panels, inside airing cupboards, or wherever a service valve needs future access without ripping out a wall. Electricians use them to keep junction boxes accessible while still meeting the requirement for concealment. First fix joiners and drylining contractors fit them at the build stage, ahead of boarding and decoration, so the services trades can come back and finish without causing damage.
In commercial settings they appear in stud partition walls, ceiling voids and service risers. Anywhere a building inspector or facilities manager might need to get eyes on a joint, meter, or stopcock without commissioning a repair job in the process.
Sizes Available
Available in two sizes: 100mm x 150mm and 190mm x 190mm. The smaller panel suits individual service points like a single valve or an electrical connector. The larger 190mm x 190mm version gives you room to get a hand in — useful if you need to operate something rather than just look at it. Worth measuring what you need to access before ordering, rather than guessing and ending up with something too small to be useful.
White finish suits painted plasterboard walls and ceilings as a standard. The panel is made from plastic, which keeps the weight down and means it will not corrode in damp environments like bathrooms or utility rooms. A sensible, practical item that does its job without drama.
Pro Tip: Cut the aperture slightly undersize first and test the fit before going to final size — the clip fit frame needs a snug opening to hold properly, and you cannot un-cut plasterboard.
Timloc plastic access panels are used wherever building services need to be concealed but remain accessible. Common locations include bath panel voids, stud walls containing isolation valves or junction boxes, airing cupboards, ceiling voids above commercial units, and service risers in multi-occupancy buildings. Plumbers, electricians, drylining contractors and general builders all use these as a standard part of first and second fix work.
Best For
Concealing plumbing isolation valves
Covering electrical junction boxes
Service access in stud partition walls
Bath panel and airing cupboard installations
Commercial service risers and ceiling voids
Compatible Surfaces
Plasterboard
Tile backer board
MDF and sheet timber
Lightweight partition wall materials
Key Features
Clip fit — no screws or fixings required
White finish suits painted surfaces
Plastic construction — will not corrode in damp areas
Available in 100mm x 150mm and 190mm x 190mm
Suitable for residential and commercial use
Flush fitting finish
Not suitable for: Not suitable for use in fire-rated walls or ceiling assemblies where an intumescent or fire-rated access panel is required. Not designed for external or outdoor installation.
Mark out and cut the aperture cleanly using a pad saw or multi-tool. The opening should be sized to accept the frame with minimal gap around the edge. Insert the frame into the opening and press until the clips engage. Fit the door panel by aligning it with the frame and pressing to close.
Mark the aperture position on the wall or ceiling, checking there are no services directly behind the cut line
Cut the opening cleanly using a pad saw or multi-tool — keep the cut slightly undersize and test fit before going to final size
Insert the access panel frame into the aperture and press firmly until the retaining clips locate against the back of the board
Check the frame sits flush with the surface with no visible gaps around the perimeter
Fit the door into the frame and press to close — it should clip shut with even contact around all edges
Redecorate around the frame as required once installed
Does the clip fit panel require any fixings or adhesive to hold it in place?
No. The panel is designed to clip into the cut aperture without screws or adhesive. The frame has integral clips that locate behind the board once pushed through. A correctly sized opening is what holds it securely, so accurate cutting matters.
Which size should I choose for a plumbing isolation valve?
The 100mm x 150mm panel suits a single valve where you only need hand access to operate it. If you need to get a full hand inside to work on a fitting or need more working room, the 190mm x 190mm version is the better choice.
Can these panels be painted to match the wall?
Yes. The white plastic surface will accept emulsion paint, which makes it straightforward to blend in with a decorated wall. Use a light sand first to help the paint key to the smooth plastic surface.
Manufactured from white plastic, these Timloc access panels are lightweight and unaffected by moisture, making them suited to bathrooms, utility rooms and other damp environments. The clip fit design locates into a cut aperture in sheet materials without mechanical fixings. Available in 100mm x 150mm and 190mm x 190mm sizes to suit different service access requirements.
Brand
Timloc
Material
Plastic
Colour
White
Fixing Method
Clip fit
Available Sizes
100mm x 150mm, 190mm x 190mm
Application
Internal walls and ceilings
SKU
DTS-TIMLOC-ACCESS-PANEL-PLASTIC-CLIP-FIT-WHI
Size
100mm x 150mm, 190mm x 190mm
Reviews
There are no reviews yet.
Be the first to review “Timloc Access Panel – Plastic – Clip Fit – White”Cancel Reply
Reviews
There are no reviews yet.