The P305 FFP3 valved respirator offers a generous cup shape, internal foam gasket seal, and a high-performance exhalation valve. Dolomite tested for breathability. CE-CAT III certified to EN 149:2001+A1:2009 FFP3 NR D.
Trade QTY discounts — the more you buy, the more you save
Quantity
Discount
You Save
Price/unit
Buy 10+
£0.20£0.24
12.6% off
£1.39£1.67
Discount applies across all variants of this product.
The P305 FFP3 valved respirator mask is built for trades where airborne dust and particulates are part of the daily grind. Cutting stone, grinding concrete, sanding hardwoods, working near asbestos-containing materials during controlled removal — wherever FFP3 protection is required, this mask is rated to handle it. The P305 FFP3 valved respirator mask meets EN 149:2001+A1:2009 FFP3 NR D, CE certified to Category III, which is the standard for the most serious respiratory hazards.
What sets this mask apart from the usual pack of disposables is the design. The cup is noticeably bigger than most FFP3 masks on the market — better for people with larger faces, and generally more comfortable all round because it sits further away from your mouth. The internal EVA foam gasket creates a reliable seal against the face, which matters a great deal when you are dealing with fine silica dust or other hazardous particulates that make a mockery of a poorly fitting mask.
P305 FFP3 Valved Respirator: Built for Long Shifts
The exhalation valve is the detail most people notice first in practice. Working in hot conditions wearing a non-valved FFP3 mask can feel like breathing through a damp sock, and the heat build-up inside is genuinely unpleasant. The valve on the P305 releases exhaled air efficiently, reducing heat and moisture inside the cup. It makes a real difference on long tasks or in confined spaces where the temperature rises quickly.
The wide adjustable elastic head straps give you a proper secure fit without cutting into the back of your head after an hour. Get them set right once and the mask stays put, which is more than can be said for cheaper alternatives that slip the moment you look down.
Dolomite Clogging Test
The dolomite test — the D in FFP3 NR D — is worth understanding. It simulates dusty environments to verify the mask does not clog and restrict airflow over an extended period. Passing this test means the filtration stays effective and breathability holds up in heavy dust conditions, not just at the start of the shift. For most construction and demolition environments, that distinction matters.
Supplied in a retail box, making this suitable for on-site stock or counter display.
Pro Tip: Before each use, cup both hands over the mask and exhale sharply to check for air leakage around the gasket seal — if you feel air escaping at the edges, readjust the head straps and retest before entering any hazardous dust environment.
The P305 is used across construction, demolition, roofing, groundworks and any trade involving high concentrations of fine dust. It is well suited to tasks like cutting or grinding concrete, brick and stone, working with fibrous insulation materials, and environments where silica dust exposure is a risk. It is also appropriate for controlled asbestos removal work where FFP3 is specified as the minimum respiratory protection. Spray painting and chemical vapour applications are outside its scope, but for particulate hazards it covers a wide range of site conditions.
Best For
Concrete and stone cutting or grinding
Silica dust environments
Demolition and heavy construction
Fibrous insulation installation
High dust concentration tasks
Hot or confined working conditions
Available In
Single unit
Retail boxed presentation
Key Features
EN 149:2001+A1:2009 FFP3 NR D certified
CE Category III
Internal EVA foam gasket seal
Larger cup shape for improved comfort
High-performance exhalation valve
Wide adjustable elastic head straps
Dolomite clogging test passed
PP and EVA foam construction
Not suitable for: Not suitable for protection against gases, vapours or chemical fumes. Not intended for use in oxygen-deficient environments.
Fit the mask over the nose and mouth, pulling the head straps over the crown and back of the head. Press the nose clip firmly down across the bridge of the nose to form a close fit. Adjust the straps until the mask sits securely without gaps at the sides or chin.
Perform a fit check before entering the work area. Cup your hands over the mask and exhale: there should be no air escaping at the face seal. If there is, readjust and recheck. The mask is disposable and non-reusable once the filtration performance is compromised or the mask becomes damaged or excessively soiled.
Inspect the mask before use for any visible damage to the cup, valve or straps
Hold the mask with the nose clip facing upwards and position it over your nose, mouth and chin
Pull the upper strap over the crown of your head and the lower strap around the back of the neck
Press the nose clip down with both hands, moulding it to the shape of your nose bridge
Adjust both straps for a firm, even fit with no slack
Perform a positive pressure fit check by covering the valve and exhaling gently — the mask should bulge slightly with no air escaping at the edges
Perform a negative pressure check by covering the front of the mask and inhaling — the mask should collapse slightly with no air drawn in around the seal
Discard and replace if the mask becomes damaged, heavily soiled, breathing resistance increases significantly, or the seal cannot be maintained
What does the D rating mean on the P305 FFP3 NR D certification?
The D stands for dolomite tested. This is an optional test under EN 149 that exposes the mask to a calcium carbonate dust challenge to confirm the filter does not clog and breathability is maintained over time. It is particularly relevant in heavy or prolonged dust environments where filter loading is a concern. Not all FFP3 masks carry this rating, so it is a meaningful indicator of performance in demanding conditions.
Can the P305 be used for asbestos work?
FFP3 is the minimum specified respiratory protection for most licensed asbestos removal work under UK Control of Asbestos Regulations. The P305 meets the FFP3 standard and carries CE Category III certification, which covers high-risk applications. Always confirm with your site supervisor or COSHH assessment that a disposable FFP3 mask is appropriate for the specific scope of work — some higher-risk asbestos tasks require a full-face respirator or powered air-purifying equipment.
The P305 is constructed from polypropylene with an EVA foam internal gasket. It is certified to EN 149:2001+A1:2009 as FFP3 NR D, meaning it offers the highest class of disposable particulate filtration, is non-reusable, and has passed the dolomite clogging test. CE Category III classification applies to personal protective equipment designed for protection against serious or irreversible health risks.
Standard
EN 149:2001+A1:2009 FFP3 NR D
Certification
CE Category III
Protection Class
FFP3
Valve
Yes, exhalation valve
Materials
PP, EVA Foam
Reusability
Non-reusable (NR)
Head Straps
Wide adjustable elastic
Face Seal
Internal EVA foam gasket
SKU
P305WHR
Reviews
There are no reviews yet.
Be the first to review “FFP3 Valved Premium Dolomite Respirator Mask – P305”Cancel Reply
Reviews
There are no reviews yet.