14m 110v Trailing Lead – 16 Amp – 1.5mm Cable

This Faithfull 110v extension lead gives you a 14-metre reach from your site transformer, which is usually enough to stop you unplugging and moving the transformer every ten minutes. Fitted with a 16 amp 110v plug and socket as standard, the lead works directly with most yellow-bodied site tools and transformers without any adaptor faffing. The 1.5mm cable is suited to standard site power tools drills, jigsaws, grinders where the 16 amp rating covers normal working loads at this cable length.

The plug and socket are moulded in hardened plastic, which matters on site. Connectors take a beating they get dropped, dragged across concrete, and occasionally driven over. The hardened construction resists cracking and holds the connection secure even when the lead is under a bit of tension. It is the kind of detail that separates a lead that lasts a full project from one that fails on the third day.

Where This 110v Trailing Lead Gets Used

The 14m length is the most common choice for general site work. It gives you enough slack to reach most areas of a room or bay without creating an excessive coil at the transformer end. Most electricians and site operatives find 14 metres covers the majority of jobs running into tight spots, up scaffolding, or across a floor slab without the added weight and bulk of a longer lead.

Because the lead runs at 110v, it is compatible with the reduced low voltage (RLV) site power systems required under most principal contractor health and safety rules. The 110v centre-tapped earth system limits the maximum voltage to earth to 55v, which significantly reduces the risk of a fatal shock if the cable is accidentally cut or the plug is pulled under load. This is the reason 110v leads are mandatory on most UK construction sites rather than a matter of personal preference.

Cable Specification and Load Considerations

The 1.5mm cable on this lead handles most handheld site tools comfortably at 14 metres. If you are running a larger load a heavy-duty angle grinder, a site saw, or multiple tools from a splitter a 2.5mm version of this lead would be the better choice. Undersizing cable for high-draw tools causes voltage drop, which makes motors work harder and shortens tool life. Worth knowing before you decide which lead to order.

This Faithfull 110v trailing lead is a straightforward, well-specified option for everyday site use. The 14m length, hardened connectors, and 16 amp rating cover the vast majority of site tool applications without overcomplicating anything. Keep a spare in the van and you will not lose time waiting on a replacement when a connector eventually takes one knock too many.