Non-adhesive PVC barrier warning tape in high-visibility black/yellow or red/white stripes. 75mm wide, 500m per roll. Used for cordoning off areas on construction sites, in warehouses, factories, and wherever a clear visual warning is needed.
Colour
QTY
Price
QTY
Red / White
1
£3.98£4.78
Red / White
10
£37.90£45.48
Black / Yellow
1
£3.98£4.78
Black / Yellow
10
£37.90£45.48
Barrier warning tape is one of those products that every site should have stacked in the van or the stores room. This non-adhesive PVC tape is 75mm wide and comes on a 500m roll, giving you a serious run of coverage from a single reel. Available in black and yellow or red and white, the strongly contrasting stripe pattern makes the hazard visible from a distance without any ambiguity about what it means: stay back, or proceed with caution.
Unlike adhesive tapes, this barrier warning tape is designed to be tied, stretched, or looped between posts, cones, barriers, or fixed points. There is no sticky residue to deal with, no surface preparation needed, and no risk of it pulling paint off a gate or handrail when you remove it. That simplicity is exactly what you want when you are cordoning off an area quickly and moving on.
Where Barrier Warning Tape Gets Used
The tape is built around a single job: creating a clear, visible boundary between people and a hazard or restricted area. It does that job reliably across a wide range of settings. On construction sites it goes around excavations, plant areas, and live working zones. In warehouses and factories it marks out restricted access areas, walkway edges, or machinery exclusion zones. Emergency services use it to establish perimeters at incidents. Local authorities reach for it during roadworks and public events.
The 75mm width makes the stripe pattern clearly legible even when the tape is fluttering in wind or sagging slightly between two tie points. Anyone approaching from a reasonable distance can see exactly where the boundary is. That visual clarity is the whole point of barrier warning tape, and the high-contrast colouring delivers it without needing any additional signage in most situations.
Choosing Between Black/Yellow and Red/White
Black and yellow is the more widely recognised hazard colour combination in UK industry, broadly in line with safety signage conventions. It reads as a general warning or caution boundary and suits most construction, industrial, and site applications. Red and white carries a stronger association with prohibition or danger and is commonly used by emergency services or where a harder stop boundary is required. Both rolls are the same size and specification; the choice comes down to the site protocol or the signal you want to send.
At 500m per roll, a single reel goes a long way. Ten-roll packs are available if you are ordering for a larger site or keeping stock levels sensible. The PVC construction means the tape holds up well outdoors across normal UK weather conditions: it will not disintegrate in light rain or become brittle in cold temperatures the way some cheaper tapes can.
This is a basic product done properly. It is on the roll when you need it, it goes up fast, and it communicates the hazard clearly. Barrier warning tape is not glamorous, but a site without it when something goes wrong is a site with a problem.
Pro Tip: Tie the tape slightly taut rather than fully slack between posts: a sagging run at ankle height is more of a trip hazard than a warning.
Barrier warning tape is used wherever a clear visual boundary needs to be created quickly without permanent fixings or adhesive. On construction sites it goes around excavations, exposed drops, plant exclusion zones, and live working areas. In warehouses and factories it marks restricted zones around machinery or loading areas. Emergency services use it to establish scene perimeters. Local authority and events teams use it to manage pedestrian access at roadworks, street events, and temporary closures.
Best For
Cordoning off excavations and hazardous areas
Construction site safety boundaries
Warehouse and factory restricted zones
Emergency service scene perimeters
Event and roadwork crowd control
Temporary access restriction in any trade or public setting
Available In
Black and Yellow stripes
Red and White stripes
Single roll (500m)
10-roll pack
Key Properties
Non-adhesive PVC construction
75mm wide for high visibility
500m per roll
High-contrast stripe pattern
No adhesive residue on removal
Suitable for indoor and outdoor use
Not suitable for: This tape is not suitable for use as an adhesive fixing or surface marking tape. It is not a replacement for permanent safety signage where regulations require fixed, durable markings.
Unroll the tape and tie, loop, or wrap it around posts, cones, fencing, or any fixed anchor point to create a visible boundary. No tools are required. Tension the tape enough to keep it at a visible height, typically at waist level for a primary barrier or knee to waist level for a secondary boundary. For longer runs, support the tape at intervals to prevent excessive sag.
When the work is done, simply untie or cut the tape and dispose of it. Because there is no adhesive, removal takes seconds and leaves no residue on posts or barriers.
Identify the boundary line you need to create and locate suitable anchor points such as posts, cones, or fencing.
Tie the free end of the tape to the first anchor point at the appropriate height.
Unroll the tape along the boundary, keeping it reasonably taut to maintain visibility.
Tie or wrap the tape at each intermediate anchor point to prevent excessive sag on longer runs.
Secure the end of the tape at the final anchor point and cut to length.
When the area is clear, untie or cut the tape and dispose of it.
Is this tape adhesive, or does it just tie in place?
It is non-adhesive. The tape is designed to be tied, looped, or wrapped around posts, cones, or barriers to create a cordon. It leaves no sticky residue and does not need to be stuck to any surface.
What is the difference between the black/yellow and red/white versions?
Both rolls are the same size and material. Black and yellow is the standard hazard warning combination used across most UK construction and industrial settings. Red and white is more commonly associated with prohibition or danger boundaries and is widely used by emergency services. Choose based on your site protocol or the level of warning you need to communicate.
Will the tape hold up outdoors in wet or cold weather?
Yes. The PVC construction handles typical UK outdoor conditions, including rain and cold temperatures, without disintegrating or becoming brittle. It is intended for site use, so short to medium-term outdoor exposure is not a problem.
Barrier warning tape is manufactured from PVC film in a non-adhesive format, printed with high-contrast diagonal stripe patterns in either black and yellow or red and white. The 75mm width provides a legible stripe sequence that remains visible at a distance, including in low light or windy conditions. Each roll measures 500m in length, making it suitable for extended site cordons from a single reel without joins.
Width
75mm
Length per roll
500m
Material
PVC
Adhesive
None
Colours available
Black / Yellow, Red / White
Pack options
1 roll, 10 rolls
Weight
N/A
Product Type
Hazard, Barrier & Safety Tapes
Colour
Black / Yellow, Red / White
Size
75mm x 500m
Box Quantity
1, 10
Reviews
There are no reviews yet.
Be the first to review “Barrier Warning Tape 75mm x 500m Non-Adhesive PVC”Cancel Reply
Reviews
There are no reviews yet.