Contractors Roller Frame & Tray Set 9″
SKU: 720129
Categories: Building Products, Decorating, Roller Tray Sets
Tags: 9", content-updated, frame, Roller, set, tray
£7.89£9.47 EX VATINC VAT
A complete 9 inch contractors roller set including five roller sleeves, a frame with push fit handle and a paint tray. Suitable for emulsion, water-based and undercoat paints on smooth and semi-rough surfaces.
If you need to get a room painted quickly without hunting around for individual parts, this 9 inch contractors roller set does the job straight out of the packet. You get five roller sleeves, a roller frame with a push fit handle, and a tray — everything you need to crack on. It’s aimed squarely at trade use, where having spare sleeves on hand means you keep moving without stopping to wash out a clogged roller mid-job.
The 9 inch width is the standard trade size for a reason. It covers walls efficiently without being unwieldy, and it works well whether you’re rolling out a full emulsion finish or putting down an undercoat coat before the day gets away from you. The sleeves are designed for good paint pick-up, which matters more than people give it credit for — a sleeve that holds its load well means fewer passes and a more consistent finish.
Where This 9 Inch Roller Set Gets Used
This set is built for smooth and semi-rough surfaces, so it handles standard plaster, plasterboard, previously painted walls and light textured surfaces without trouble. It’s well suited to emulsion, water-based paints and undercoat, which covers the bulk of what most decorators and site painters are doing day to day. The push fit handle makes it quick to assemble, and with five sleeves in the pack you’ve got enough to rotate through a full day’s work or tackle several rooms without the faff of constant washing out.
Having a set like this on-site means you’re not borrowing a tray off someone else or making do with a single roller that’s past its best. Five sleeves is a sensible quantity — enough to hand one to a labourer, keep a couple clean for topcoats, and not worry too much about the ones that end up forgotten in a bucket. Trade convenience, basically.
At this price point, the 9 inch contractors roller set makes sense to buy in multiples at the start of a project rather than running out mid-paint. Bulk pricing is available — worth a look if you’re kitting out a larger team or a run of properties.
Pro Tip: When switching between paint colours on site, swap the sleeve rather than cleaning it out — a fresh sleeve takes seconds to fit and gives you a cleaner result with no colour bleed.
This roller set is used by decorators, painters and general builders across a wide range of interior paint jobs. It handles living rooms, bedrooms, hallways, stairwells and commercial spaces equally well. It covers emulsion on new plaster, water-based paints on previously decorated walls and undercoat on bare or stripped surfaces. Semi-rough surfaces such as pebble-dashed render or lightly textured ceilings are within its range, though very coarse textures will wear through the sleeves faster.
Best For
- Interior wall and ceiling painting
- Emulsion and water-based paints
- Undercoat application
- Smooth and semi-rough surfaces
- Trade and site decorating
Works With
- Emulsion paints
- Water-based paints
- Undercoat paints
- Standard plaster and plasterboard
- Previously painted surfaces
- Lightly textured surfaces
Key Features
- 9 inch roller width
- 5 contractor roller sleeves included
- Push fit handle assembly
- Paint tray included
- Good paint pick-up on sleeves
Not suitable for: Not recommended for solvent-based paints or gloss finishes, as the sleeves are designed for water-based products. Heavy textured or masonry surfaces will wear through the sleeves faster and are better served by a dedicated masonry roller.
Clip the roller frame together and push the handle into place — it should seat firmly without tools. Fit one of the sleeves onto the frame cage. Pour paint into the tray, load the roller evenly by rolling it through the paint and back up the ribbed ramp a couple of times, then apply to the wall in overlapping passes. When a sleeve is spent or you're switching colour, pull it off and fit a fresh one.
- Assemble the roller frame and push the handle firmly into the fitting until it locks
- Slide a roller sleeve onto the cage, making sure it sits evenly with no overhang
- Pour paint into the tray to about a third full — no need to fill it to the brim
- Load the roller by running it through the paint and back up the ribbed ramp several times until it holds an even coat
- Apply paint to the wall in overlapping W or M shaped passes to build up consistent coverage
- Reload the roller before it starts dragging or leaving dry patches
- When the sleeve is done, pull it off the frame and fit a clean replacement to continue
Can I use these roller sleeves with gloss or oil-based paint?
No. The sleeves in this set are designed for water-based products: emulsion, undercoat and similar finishes. Solvent-based paints and traditional oil gloss are not suitable and will break down the sleeve material quickly.
Are the roller sleeves in this set washable and reusable?
Yes, they can be rinsed out with water after use in water-based paints. That said, having five sleeves in the set means most tradespeople swap them out rather than washing mid-job, which keeps things moving on site.
Is the handle compatible with extension poles?
The push fit handle on this frame is standard trade sizing, which means it will accept most threaded extension poles. Check the thread type on your pole if you are unsure, as fittings are not always universal across all brands.
The roller frame is constructed from wire cage with a push fit plastic handle, typical of contractor-grade equipment used for high-turnover site painting. The sleeves are medium pile, suited to smooth and semi-rough surfaces and formulated for use with water-based coatings. The tray is moulded plastic with a ribbed loading ramp to allow controlled paint uptake.
| Roller Width | 9 inch (approximately 225mm) |
|---|---|
| Sleeves Included | 5 |
| Handle Type | Push fit |
| Tray Included | Yes |
| Paint Compatibility | Emulsion, water-based, undercoat |
| Surface Types | Smooth and semi-rough |
Be the first to review “Contractors Roller Frame & Tray Set 9″”Cancel Reply











Reviews
There are no reviews yet.