Styrene free chemical anchor resin in 300ml cartridge. Rapid curing, low odour, and applies with a standard sealant gun. Works in dry, wet or flooded conditions. Good for heavy load fixings into masonry, concrete and brick.
Available options and pricing for Everbuild anchorset green 300 - chemical anchor resin styrene free (anchgreen), with quantity selectors and a running total
Size
SKU
Price
QTY
Total
300ml (qty:1)
ANCHGREEN
£5.95£7.14
—
300ml (qty:12)
ANCHGREEN-12
£68.28£81.94
—
Everbuild Anchorset Green 300 is a styrene free chemical anchoring resin built for high strength fixings where standard mechanical anchors won’t cut it. Whether you’re setting threaded rods into concrete, fixing railings into brickwork, or securing machinery to a warehouse floor, this is the kind of product that takes the worry out of the job. The styrene free formula keeps odour low, which matters when you’re working in enclosed spaces or anywhere with limited ventilation.
The 300ml cartridge uses Everbuild’s Easy-Flow twin bag system, where the two components are kept separate inside the cartridge and mix through the nozzle as you apply. No measuring, no manually combining resins. Fit the nozzle, prime a small amount, then it’s ready to go. The mixing happens automatically, so you get a consistent ratio every time without any fuss on site.
One thing worth noting is the application flexibility. Anchorset Green 300 can be applied into dry, damp, wet or even flooded holes. That’s useful on groundworks, basement fixings, or any situation where you can’t fully dry out the substrate before you need to get on with things. It saves the delay of waiting for conditions to be perfect, which in the UK is usually never.
Where Everbuild Anchorset Green 300 Gets Used
This resin is used across a wide range of structural and fixing applications. Setting studs and starter bars into concrete is one of the most common jobs. It’s also well suited to anchoring handrails, security barriers, signage brackets, and satellite dish mounts into masonry. Contractors fixing wall ties on remediation work will find it performs well here too.
Working in Wet Conditions
The ability to cure in flooded holes is not a marketing claim to take lightly. Resin systems that fail in wet conditions are a genuine site problem. Anchorset Green 300 is formulated to handle this, which puts it in a different bracket from basic polyester resins when conditions aren’t ideal.
Applies with any standard cartridge gun. No special equipment needed, no unfamiliar system to learn. Just load, mix nozzle on, prime, and go.
Pro Tip: Always expel the first 10-15ml of mixed resin from the nozzle before you start filling holes, this purges any unmixed material at the tip and ensures you're getting a properly combined product into every fixing.
Anchorset Green 300 is used wherever a high strength chemical fixing is needed into concrete, brick, blockwork or stone. It's a go-to on structural steelwork connections, floor-mounted machinery bases, handrail and balustrade posts, wall ties, and threaded rod installations. Civil engineers, groundworkers and building contractors all reach for this kind of resin when the loads involved make mechanical anchors unsuitable or impractical.
It handles wet substrates without issue, making it particularly useful in below-ground construction, drainage structures, retaining walls and anywhere water ingress is a factor. It can also be used for fixing into perforated materials such as hollow block using a mesh sleeve.
Best For
Threaded rod and stud installation
Handrail and railing posts
Wall tie fixings
Machinery and equipment anchoring
Signage and bracket fixings
Starter bars into concrete
Compatible Surfaces
Concrete
Brick
Blockwork
Natural stone
Hollow masonry (with mesh sleeve)
Wet or flooded substrates
Key Properties
Styrene free, low odour formula
Rapid curing system
Twin bag Easy-Flow cartridge
Applies with standard sealant gun
Suitable for dry, wet and flooded conditions
High load bearing strength
Not suitable for: Not suitable for use in cracked concrete without confirming the product's specific approval for that application. Not recommended for overhead fixing into hollow sections without a mesh sleeve to support the resin.
Drill the hole to the correct diameter and depth for your anchor rod or bolt. Remove all dust and debris from the hole using a blow-out pump and stiff brush. This step is critical because dust contamination between the resin and the substrate wall is one of the most common causes of anchor failure, so don't skip it.
Fit the mixing nozzle to the Anchorset Green 300 cartridge and load into a standard sealant gun. Expel a small amount of resin to waste until the colour is uniform, confirming the two components are mixing correctly. Fill the hole from the bottom up to avoid air pockets, then insert the rod or bolt with a slow turning motion. Leave undisturbed for the full cure time before loading.
Drill the hole to the specified diameter and depth for your chosen fixing rod or bolt
Clean the hole thoroughly using a blow-out pump and brush to remove all dust and debris
Attach the mixing nozzle to the cartridge and load the cartridge into a standard sealant gun
Expel a small amount of resin to waste until the extruded mix shows a uniform colour
Fill the hole from the bottom up, withdrawing the nozzle gradually as you go to avoid voids
Insert the anchor rod or bolt immediately with a slow rotational motion to aid distribution
Hold or prop the rod in position and leave undisturbed for the full cure period before applying any load
Do I need a special gun to use Everbuild Anchorset Green 300?
No, it works with a standard sealant cartridge gun. The Easy-Flow twin bag system is designed to work with the same gun you'd use for silicone or frame sealant. Just fit the mixing nozzle provided and you're set.
Can Anchorset Green 300 be used in wet or damp holes?
Yes. One of the key advantages of this resin is that it can be applied into dry, wet or even flooded holes. This makes it well suited to groundworks, basement fixings, and any application where you can't guarantee the substrate will be completely dry before installation.
Why does the product say styrene free and why does that matter on site?
Many older chemical anchor resins contain styrene, which has a strong, unpleasant smell and can cause irritation in enclosed or poorly ventilated spaces. Styrene free formulas like Anchorset Green 300 significantly reduce odour, making them a much better choice for indoor work, basements, or anywhere air circulation is limited.
Anchorset Green 300 is a two-component polyester-based resin system formulated without styrene. The components are housed in a twin bag cartridge that ensures correct mixing ratio through the static mix nozzle. The rapid cure system allows quicker load application compared to slower epoxy alternatives, and the formula is designed to maintain performance in wet and flooded bore conditions, which standard polyester resins typically cannot achieve.
Product Name
Everbuild Anchorset Green 300
Volume
300ml
Formula Type
Styrene free two-component resin
Application Method
Standard sealant cartridge gun with mixing nozzle
Cure Type
Rapid curing
Substrate Conditions
Dry, wet or flooded
Suitable Substrates
Concrete, brick, blockwork, natural stone
SKU
DTS-EVERBUILD-ANCHORSET-GREEN-300-CHEMICAL-A
Size
300ml (qty:1), 300ml (qty:12)
Reviews
There are no reviews yet.
Be the first to review “Everbuild anchorset green 300 – chemical anchor resin styrene free (anchgreen)”Cancel Reply
Reviews
There are no reviews yet.