Galvanised Gravel Board Clip for Timber Fence Posts Box of 25

A galvanised gravel board clip is the straightforward way to fix a timber gravel board to a timber fence post without complicated joinery or through-bolting. These clips hold the gravel board firmly in position at the base of the fence panel, keeping it clear of the ground and making it simple to replace the board later without disturbing the rest of the fence. Each box contains 25 clips, giving you enough to work across a good run of fencing in one go.

Gravel board clips are used wherever a timber gravel board sits between fence posts at ground level. The clip bridges the gap between the board face and the post face, holding the board securely in position. Because the board is not permanently fixed into the post, it can be swapped out quickly when it starts to rot at the base. That is one of the main reasons gravel boards exist in the first place. Anyone who has replaced a full fence panel when only the bottom 150mm had gone soft will appreciate the logic.

Sizes Available for Gravel Board Clips

These galvanised gravel board clips are available in three sizes to suit the most common combinations of gravel board and post dimension:

150 x 25mm suits a standard 25mm thick gravel board fixed to a post face.
150 x 50mm suits a 150mm wide board against a 50mm post face, or a board recessed into a slotted post.
170 x 50mm provides a slightly taller clip face for deeper boards or where a little extra coverage is needed at the base.

Checking your board width and post face dimension before ordering takes seconds and avoids the inconvenience of clips that do not sit flush. Most domestic timber fencing uses the 150 x 50mm size, but it is worth measuring rather than assuming.

Why Galvanised Clips Hold Up Outdoors

Galvanising provides a zinc coating that resists corrosion in outdoor and ground-level conditions. For fencing hardware that sits close to soil, grass, and standing water, this matters. Uncoated steel fixings will rust and stain timber within a season or two in typical UK weather. Galvanised gravel board clips maintain their grip and appearance over the long term without any maintenance, which is exactly what you want from a fixing that is partly buried behind a board at the base of a fence.

The clips are nailed or screwed directly to the post face, with the board sliding or pressing into the clip channel. Installation is quick, does not require drilling, and can be completed with standard fencing tools. For a fencing contractor working through a run of panels, the time saving over alternative fixing methods adds up noticeably across a full day.

Sold in boxes of 25, these gravel board clips are priced for trade use and suit anyone working on residential garden fencing, boundary fencing, or estate maintenance.