Woven polypropylene rubble sacks with drawstring tops, available in two sizes. Tough, tear-resistant, and reusable. Pack of 10, suited to building waste, landscaping clearance, and general site use.
Size
Price
QTY
60 x 90cm
£3.67£4.40
80 x 120cm
£5.64£6.77
These heavy duty rubble sacks are made from woven polypropylene with an 11 x 10 weave construction, giving them the tear resistance needed for sharp, heavy material like broken brick, concrete, and hardcore. If you have ever watched a cheap bag split halfway across a skip run, you will appreciate why the weave density matters. Available in two sizes, 60 x 90cm and 80 x 120cm, they come in packs of 10 and are suited to anyone clearing a site, garden, or renovation job without wanting to make three trips for every one bag.
The drawstring tops mean you can tie each sack off once it is full, which keeps dust and debris contained during handling and makes stacking and disposal tidier. No loose rubbish spilling back out when you lift them. On a busy site that is a small detail that makes a real difference at the end of a shift.
Woven polypropylene is the right material for this job. It does not degrade the way paper or standard plastic bags do when they get wet, and it holds its shape under load. These rubble sacks are also reusable, so if the job involves moving material in stages or the bags are not filled to capacity, you can shake them out and use them again rather than tearing through a whole pack in a day.
Where These Rubble Sacks Get Used
The 60 x 90cm size suits tighter jobs where you need manageable loads, particularly when sacks are being carried by hand up stairs or through narrow doorways during a strip-out. The 80 x 120cm sacks are better suited to outdoor work, landscaping, and situations where a barrow or machine is doing the shifting, so you can load more in one go without worrying about the bag letting you down.
Builders, groundworkers, landscapers, and general labourers all reach for rubble sacks regularly. They work for bagging up plasterboard offcuts, tiles, soil, gravel, sand, and mixed demolition rubble. They are equally useful for garden clearance, skip-loading, and general tidying of a work area at the end of the day. Having ten in a pack means there is always a sack to hand rather than hunting around the van.
The woven construction also means these sacks are a step up from the thin, glossy polythene alternatives that puncture on contact with a sharp edge. When the contents are broken tiles, flint, or fractured render, that difference in material quality is the difference between the job going cleanly and the contents ending up on the floor.
At this price point, keeping a couple of packs on the van or in the site store makes sense. Rubble sacks are one of those consumables that run out at the worst possible moment, and having a reliable stock of heavy duty ones means the job does not stop for a trip to the merchant.
Pro Tip: When filling these sacks with heavy material like concrete or stone, keep loads to around a third of the bag's volume so the sack stays manageable to lift and the drawstring closure is not under excessive strain.
Heavy duty rubble sacks like these are used wherever building and landscaping waste needs to be contained and moved. Common applications include strip-out work on renovation sites, demolition debris collection, soil and turf removal, garden clearance, and general tidying of construction areas. The two size options make them practical for both confined indoor jobs and larger outdoor clearance work. They are regularly used by builders, roofers, groundworkers, landscapers, and general labourers on both domestic and commercial sites.
Best For
Building and demolition waste
Landscaping and garden clearance
Soil, gravel, and hardcore
Skip-loading and site tidying
Strip-out work and renovation debris
Available In
60 x 90cm
80 x 120cm
Pack of 10
Key Features
11 x 10 woven polypropylene construction
Tear-resistant material
Drawstring top closure
Reusable
Suitable for heavy and sharp debris
Not suitable for: Not suitable for liquid waste or hazardous materials. Not intended for storage of foodstuffs or domestic refuse where specific waste regulations apply.
Open the sack fully before filling to keep the weave under even tension. Fill to a manageable weight rather than to the top, particularly with dense materials like concrete or hardcore. Once full, pull the drawstring tight and knot it securely before lifting or transporting. If reusing, shake out any residual dust and check the weave for any damage before refilling.
Select the appropriate size for the job, 60 x 90cm for lighter or more confined work, 80 x 120cm for larger outdoor loads
Open the sack fully and stand it upright before filling
Load material steadily, keeping heavy or sharp items away from the sides where possible
Fill to a manageable weight, not necessarily to full capacity, especially with dense rubble
Pull the drawstring tight and tie it off securely before moving the sack
If reusing, inspect the weave for any tears or weak spots before refilling
Can these rubble sacks be reused?
Yes, they are designed to be reusable. The woven polypropylene construction holds up well to repeated use provided the sacks are not overloaded and are checked for any damage between uses.
What is the difference between the two sizes?
The 60 x 90cm sacks are better suited to indoor strip-out work or jobs where loads need to be carried by hand through tight spaces. The 80 x 120cm sacks are larger and work well for outdoor landscaping, ground clearance, and situations where a barrow is available for moving full sacks.
Are these sacks suitable for sharp materials like broken tiles or brick?
Yes, the 11 x 10 woven polypropylene construction is tear-resistant and handles sharp edges better than thin polythene alternatives. That said, overfilling with very heavy or jagged material will put extra stress on the seams, so keeping loads to a sensible weight helps extend the life of each sack.
These rubble sacks are manufactured from woven polypropylene with an 11 x 10 weave density, which provides tear resistance when handling sharp or abrasive construction materials. The woven structure also resists degradation from moisture, making the sacks suitable for outdoor use in wet conditions. Each sack is fitted with a drawstring closure for secure tying once filled.
Material
Woven polypropylene
Weave density
11 x 10
Available sizes
60 x 90cm, 80 x 120cm
Pack quantity
10
Closure type
Drawstring
Reusable
Yes
Size
60 x 90cm, 80 x 120cm
Reviews
There are no reviews yet.
Be the first to review “Heavy Duty Rubble Sacks 60x90cm / 80x120cm Pack of 10”Cancel Reply
Reviews
There are no reviews yet.