A domed-head M10 carriage bolt with hex nut and washer, coated with a patented multi-layer corrosion resistant plating rated to 500 hours salt spray. Made for external timber fixings and ironmongery. Manufactured to DIN 603, DIN 934 and DIN 125-A. Fully threaded up to 150mm.
Can’t find it? We’ll source it.
No worries! We can usually get this in for next-day delivery or source an alternative. Drop your email and we’ll get straight back to you with options.
Nice one — request received. Check your email to confirm, and we’ll get pricing and availability over to you.
Size
Price
QTY
10.0 x 100mm
£4.25£5.10
10.0 x 150mm
£5.54£6.65
10.0 x 160mm
£5.93£7.12
10.0 x 200mm
£7.86£9.43
Out of stock
10.0 x 220mm
£10.71£12.85
The Index green exterior carriage bolt is a proper workhorse for outdoor timber fixings. That distinctive domed head combined with the square anti-spin shoulder underneath means the bolt stays put as you tighten the nut, no second pair of hands needed. It is the kind of fixing that just makes sense once you’ve used it. Available in M10 with lengths from 100mm to 220mm, each bolt comes complete with a matching hex nut and washer, so you have everything ready to go.
What sets this apart from a standard zinc bolt is the coating. Index use a patented multi-layer corrosion resistant plating that has been tested to withstand 500 hours of salt spray. That is a serious number, and it means this green exterior carriage bolt holds up where ordinary fixings would be showing rust inside a couple of seasons. Garden structures, pergolas, fencing, gates, decking frames, outdoor play equipment. Anywhere timber gets rained on repeatedly and needs to stay together for years.
Where the Index Exterior Carriage Bolt Earns Its Keep
Carriage bolts have been used in structural timber for generations, and for good reason. The domed head sits flush and clean on the face side while the square shoulder bites into the timber to prevent rotation. That means you only ever need a spanner on the nut end, which is exactly what you want when you are working at height or in an awkward spot. Pair that with a washer to spread the load and a hex nut that can be properly torqued down, and you have a fixing that will not work loose over time.
One thing worth knowing before you order: bolts up to and including 150mm are fully threaded, while anything longer is partially threaded. That is standard practice for longer carriage bolts and means the shank gives a tighter, more stable fit through thicker timber sections. Manufactured to DIN 603 for the bolt, DIN 934 for the nut, and DIN 125-A for the washer, so everything meets the tolerances you would expect from a quality exterior fixing.
Pro Tip: When driving the bolt through pre-drilled timber, drill the hole fractionally undersize so the square shoulder has something to bite into rather than spinning freely in a sloppy hole.
These green exterior carriage bolts are used wherever structural timber needs a reliable, weather-resistant through-fixing. Decking subframes, pergola posts, gate hanging hardware, fencing rails, outdoor play equipment and garden structures all come up regularly. They are equally at home on agricultural buildings and outbuildings where pressure-treated timber is the norm. The coating handles the moisture and movement that comes with exposed external joinery, making them a sensible choice any time the fixing is going to live outdoors permanently.
Best For
External structural timber connections
Gate hanging and ironmongery fixing
Decking subframes and pergola posts
Fencing and agricultural structures
Outdoor play equipment
Compatible With
Softwood and hardwood timber
Pressure-treated timber
Standard M10 hex nuts and washers
External ironmongery
Key Specifications
Thread diameter: M10
Lengths: 100mm, 150mm, 160mm, 200mm, 220mm
500 hours salt spray corrosion resistance
Manufactured to DIN 603, DIN 934, DIN 125-A
Fully threaded up to and including 150mm
Partially threaded from 160mm upward
Supplied with hex nut and washer
Box quantity: 10
Not suitable for: Not suitable for use in direct contact with stainless steel fixings or dissimilar metals where galvanic corrosion could occur. Not intended for structural steel connections or high-load engineering applications.
Drill a clean hole through both timber members slightly smaller than the bolt shank so the square shoulder seats firmly and resists rotation. Drive the bolt through from the face side, fit the washer and hex nut on the reverse, then tighten with a spanner. The domed head requires no tool on the bolt side provided the square shoulder has engaged properly with the timber.
For longer bolts in thicker sections, make sure the threaded portion extends sufficiently beyond the second timber face to allow the nut and washer to engage fully. On pressure-treated timber, pre-drilling is especially important as the denser grain can cause the shoulder to shear rather than grip if forced.
Mark bolt positions accurately before drilling to ensure proper alignment between timber members
Drill a pilot hole fractionally smaller than the bolt shank diameter through both pieces of timber
Insert the bolt from the face side, domed head outward
Tap firmly so the square anti-spin shoulder seats into the timber and locks against rotation
Fit the washer over the threaded end on the reverse face
Thread the hex nut on by hand until finger-tight
Tighten with a spanner to a firm, consistent torque without over-driving into the timber face
Why are the longer bolts only partially threaded?
Bolts over 150mm are partially threaded as standard practice for carriage bolts used in thicker timber. The plain shank fits snugly through the timber body and reduces movement, while the thread at the end engages the nut cleanly. Fully threading a long bolt adds cost and actually gives a looser fit in deep sections.
Will these bolts work with pressure-treated timber?
Yes. The multi-layer corrosion resistant coating is designed for outdoor and treated timber environments. The chemicals used in pressure-treated wood can be aggressive on ordinary zinc fixings over time, so the 500-hour salt spray rating on these gives you meaningful long-term protection.
Do I need a tool on the bolt head when tightening?
Not if the square anti-spin shoulder is properly seated in the timber. Drive the bolt through a correctly sized pilot hole and the shoulder grips the wood, allowing you to tighten the nut from the reverse side alone. If the hole is oversized and the shoulder spins, you will need to grip the dome head with an adjustable spanner or mole grips.
These M10 carriage bolts are manufactured to DIN 603 with a characteristic domed head and square neck shoulder. The hex nuts conform to DIN 934 and the flat washers to DIN 125-A. The patented multi-layer corrosion resistant plating achieves a 500-hour salt spray rating, placing these well above standard zinc-plated fixings for exterior durability. Bolts up to 150mm are fully threaded; lengths of 160mm and above are partially threaded.
Thread Diameter
M10
Available Lengths
100mm, 150mm, 160mm, 200mm, 220mm
Head Type
Domed (round) with square anti-spin shoulder
Nut Standard
DIN 934
Bolt Standard
DIN 603
Washer Standard
DIN 125-A
Corrosion Resistance
500 hours salt spray
Coating
Patented multi-layer corrosion resistant plating
Threading
Fully threaded to 150mm, partially threaded from 160mm
Supplied With
Hex nut and washer
Box Quantity
10
Finish
Exterior Green
Box Quantity
10
Size
10.0 x 100mm, 10.0 x 150mm, 10.0 x 160mm, 10.0 x 200mm, 10.0 x 220mm
Reviews
There are no reviews yet.
Be the first to review “Exterior Carriage Bolt, Hex Nut & Washer – Exterior Green – Index – Bag 10”Cancel Reply
Reviews
There are no reviews yet.