Metal Construction Sheet & Stud Screws – PH – Pan – Self-Drilling – Zinc

Metal construction sheet and stud screws are the workhorse of metal framing. These self-drilling screws eliminate the need for pilot holes, cutting installation time considerably on steel stud, metal cladding, and sheet work. The Phillips head (PH) pan design grips the screw head cleanly without cam-out, and the self-drilling tip bites through metal without pre-drilling, which saves you time on every single job.

The zinc plating provides solid corrosion resistance for internal and sheltered external work. These metal construction screws work fast through both thin and medium gauge steel, from light-duty metal framing through to roof and wall sheeting applications. Once the tip pierces the material, the threads pull the fastener home without stripping, and the pan head distributes load evenly across the surface.

A 1000-pack gives you working stock without the constant resupply headache. Whether you’re fixing metal studs to runners, attaching cladding sheets, or securing bracketry, having decent fasteners on hand makes the day move faster. The pan head stays put under the driver bit, reducing dropped screws and wasted effort.

Available in six sizes from 6×5/8 through to 8×1, so you can choose the right length for your gauge and application. The self-drilling feature means no mucking about with centre punches or drill bits for pilot holes. Feed the screw and let the tip do the work.

Stock these in your van or on site. Metal construction sheet and stud screws of this type are standard on every metal framing job, and buying in bulk at DTS means you get serious pricing without sacrificing quality or availability.