A ten-piece multi tool blade set from Faithfull covering cutting, grinding, scraping and grout removal. Includes CRV, bi-metal, carbide grit, diamond and HSS blades. Fits most major oscillating tool brands. Supplied in a carry case.
The Faithfull 10 piece multi tool blade set is the kind of kit that earns its place in the van rather quickly. Instead of hunting down individual blades every time the job changes, you’ve got ten of the most commonly needed blades sitting in one case, ready to go. Wood cutting, metal cutting, tile grinding, grout removal, scraping — it’s a well-thought-out selection that covers the bulk of what multi tool users actually reach for on site.
The set includes two flush-cut CRV wood blades at 34mm and 68mm, a radial wavy-set wood blade at 87mm, two bi-metal flush-cut blades at 10mm and 22mm for wood and metal, an 80mm HSS radial blade suited to laminated boards and partition work, a carbide grit delta rasp at 80mm for shifting mortar and tile adhesive, a 65mm carbide grit sawblade for tiles and porous concrete, a 65mm ultra-thin diamond boot blade for grout lines, and a 52mm flexible CRV scraper for adhesive residues, paint and silicone.
Where the Faithfull Multi Tool Blade Set Comes Into Its Own
That diamond boot blade is worth a mention on its own. Thin enough to get into a grout joint without damaging the tile face, and shaped to grind aggressively without wandering. For bathroom and kitchen refurbs where you need to lift grout without cracking tiles, it does the job properly.
The carbide delta rasp handles the rougher end of things — grinding back old tile adhesive from a screed or taking down a lump of filler that’s set harder than expected. Not glamorous work, but the carbide grit edge holds up well to it.
Universal Fitting
The set is compatible with AEG, Bosch, DeWalt, Fein MultiMaster, Makita, Milwaukee, Einhell, Stanley, Rockwell, Skil and most other oscillating multi tool brands. The universal mount covers the vast majority of tools you’ll find on a job. Supplied in a carry case which, unlike a lot of blade storage solutions, actually keeps things organised rather than just rattling about.
For anyone using a multi tool regularly, buying blades individually adds up fast. This Faithfull 10 piece set offers a practical spread at a sensible price, and having the right blade to hand when you need it is half the job done.
Pro Tip: When using the diamond boot blade for grout removal, run the tool at a lower speed setting to begin with — you get more control and the blade tracks the joint more accurately rather than skipping onto the tile surface.
This set is at home on renovation and refurbishment jobs where the work keeps switching between materials. Cutting back pipework flush with a wall, trimming door linings in situ, removing grout before re-tiling, scraping up old adhesive from a floor — these are exactly the situations where having the right blade already in the case saves time and a trip to the merchant.
The bi-metal blades handle copper and aluminium pipe as well as sheet metal profiles, so plumbers and first-fixers get use out of this set too. The HSS radial blade is well suited to flooring work, particularly when cutting veneered or laminated boards where a standard saw would chip the surface. The carbide grit sawblade cuts tile, plaster and porous concrete, which makes it useful in partition and dry-lining applications as well as tiling work.
Best For
Renovation and refurbishment work
Tiling and grout removal
Flush cutting in timber and metal
Scraping adhesive and silicone
Flooring and partition wall applications
Plasterboard cutting and shaping
Compatible With
AEG multi tools
Bosch multi tools
DeWalt multi tools
Fein MultiMaster
Makita multi tools
Milwaukee multi tools
Einhell, Stanley, Rockwell, Skil and most other oscillating brands
Blades Included
2x Flush-cut CRV wood blades: 34mm and 68mm
1x Radial wavy-set CRV wood blade: 87mm
2x Flush-cut bi-metal wood/metal blades: 10mm and 22mm
1x Radial HSS wood/metal blade: 80mm
1x Carbide grit delta rasp: 80mm
1x Carbide grit sawblade: 65mm
1x Diamond boot ultra-thin grout blade: 65mm
1x Flexible CRV scraper: 52mm
Not suitable for: Not suitable for use with angle grinders or non-oscillating power tools. The universal mount covers most major oscillating tool brands, but always verify your tool's fitting system before use, particularly with older or less common models.
Select the blade appropriate for the material and task. Flush-cut blades are for working close to a surface — trimming a door lining or cutting back a pipe. Radial blades are better for plunge cuts and general sawing. The carbide and diamond blades are for hard materials only and should not be used on timber.
Fit the blade securely to your multi tool following the tool manufacturer's fitting procedure. Most oscillating tools use a clamp or lever mechanism — check it's fully locked before switching on. Start at a lower speed on unfamiliar materials and increase as needed. Let the blade do the work; forcing it into hard material will shorten the blade life significantly.
The flexible scraper works best at a low angle to the surface. Apply steady downward pressure and work in short strokes. For silicone or paint removal, a slightly higher speed helps the blade flex and maintain contact with uneven surfaces.
Identify the correct blade for the material and application before fitting
Fit the blade to your oscillating multi tool using the tool's standard clamping or lever system
Confirm the blade is fully secured before switching the tool on
Set the tool to a lower speed initially, particularly when using the diamond or carbide grit blades on hard materials
Allow the blade to reach full oscillation speed before bringing it into contact with the workpiece
Apply steady, light pressure and let the blade cut at its own pace — forcing it reduces performance and blade life
For grout removal with the diamond boot blade, keep the tool tracking along the joint rather than pressing down hard
For scraping applications, hold the flexible scraper at a shallow angle to the surface and use short, controlled strokes
Store blades in the supplied carry case after use to protect the cutting edges
Will this blade set fit my Makita or DeWalt multi tool?
Yes. The blades in this set use a universal fitting system compatible with most major oscillating multi tool brands including Makita, DeWalt, Bosch, Milwaukee, Fein MultiMaster, AEG, Einhell, Rockwell, Skil and Stanley, among others. If your tool uses a standard oscillating mount, these blades should fit without an adaptor.
Can I use the carbide grit blades on floor tiles?
Yes, the 65mm carbide grit sawblade is designed for cutting tiles, plaster and porous concrete. It handles cutting out damaged tile joints and scoring grooves in similar construction materials. It is not intended for cutting through hard porcelain or dense stone tiles, where the diamond boot blade would be a better choice for grout work.
Is this set worth buying if I already have a few blades?
That depends on which blades you already have. The real value here is the spread of blade types covering wood, metal, tile and scraping in one case. If you're missing the diamond boot blade or the carbide delta rasp in particular, those alone justify looking at the set against buying individual replacements, which tend to cost more per blade when purchased separately.
The set spans four blade materials: chrome vanadium (CRV) for general wood and scraping blades, bi-metal and HSS construction for wood and metal cutting, carbide grit edges for hard construction materials, and a diamond-coated boot blade for grout removal. CRV blades are hardened and ground for clean cutting performance in softer materials. The bi-metal blades combine a hardened HSS tooth edge with a more flexible body, reducing the risk of tooth breakage on mixed-material cuts. Carbide grit and diamond edges are bonded to the blade body and suited to abrasive materials where conventional teeth would wear rapidly.
Reviews
There are no reviews yet.