Professional Synthetic Paint Brush (Single)
SKU: DTS-PROFESSIONAL-SYNTHETIC-PAINT-BRUSH-SINGL
Categories: Building Products, Decorating, Paint Brushes
Tag: Paint
Brand: Discount Trade Supplies
From £1.25£1.50 EX VATINC VAT
A professional-grade synthetic paint brush with extra-thick flagged bristles for smooth, clean results. No bristle loss, sharp cutting in, and compatible with all paints and varnishes. Traditional wooden handle with stainless steel ferrule. Available in sizes from 0.5 inch to 4 inch.
| Size | Price | QTY |
|---|---|---|
| 4" | £7.87£9.44 | |
| 3" | £4.95£5.94 | |
| 0.5" | £1.25£1.50 | |
| 1 | £1.43£1.72 | |
| 1.5" | £2.12£2.54 | |
| 2" | £2.73£3.28 | |
| 2.5" | £4.56£5.47 |
Total:
£0.00
A synthetic paint brush that actually performs — that is not something you can say about every brush on the market. This one comes with extra-thick flagged bristle tips that pick up paint cleanly and release it evenly, giving you a smooth, consistent finish whether you are rolling through a ceiling or cutting in skirting. The synthetic fibres are soft enough to avoid drag marks while still giving you the control you need for precise work. Available in sizes from 0.5 inch right up to 4 inch, so you are covered from detail work to broad flat surfaces.
The flagged tips are the bit worth paying attention to. They are what separates a brush that lays paint on cleanly from one that leaves streaks and pulls. On a synthetic brush especially, flagging helps compensate for the slightly stiffer nature of synthetic fibres compared to natural bristle — the result is paint flow that feels closer to a good natural brush, with the added benefit of durability. These brushes hold their shape through repeated use and washing, which matters when you are working through a full repaint job and do not want to bin a brush halfway through the day.
What Makes This Synthetic Paint Brush Worth Keeping on the Van
No bristle loss is a bigger deal than it sounds. There is something deeply annoying about picking bristles out of a freshly painted door. The stainless steel ferrule keeps everything locked in place and will not rust when the brush gets washed out — a detail that extends the working life of the brush considerably. The traditional wooden handle gives a comfortable, balanced grip across longer stints.
These brushes are compatible with the vapour box, which makes them suitable for anti-corrosion and bitumen-based coatings used in more specialist applications. Beyond that, they work with all standard water-based and solvent-based paints, primers, varnishes, and stains — so there is no guessing about compatibility. Whether you are a decorator working through a domestic repaint, a site painter knocking through new builds, or a maintenance operative keeping a commercial property looking presentable, this brush covers the ground without fuss.
At £1.25, it is the kind of brush you can buy in a handful of sizes and not lose sleep over the cost. Good enough to keep, cheap enough to replace.
Pro Tip: When switching between water-based and solvent-based coatings on the same job, keep separate brushes for each rather than cleaning back and forth — synthetic bristles can retain enough solvent residue to affect water-based paint adhesion on the next coat.
This synthetic paint brush is suited to most standard decorating tasks: painting walls, ceilings, doors, window frames, skirting boards, and architraves in both domestic and commercial settings. It works equally well with emulsions, satins, gloss paints, primers, varnishes, and stains. The range of available sizes makes it practical across a full decorating setup, from tight cutting-in on coving or glazing bars with the 0.5 inch, through to broader application on flat surfaces with the 3 inch or 4 inch. The vapour box compatibility also makes it a reasonable choice for bitumen coatings and anti-corrosion primers in maintenance and light industrial applications.
Best For
- Cutting in on skirting, architraves and window frames
- Applying emulsion, satin and gloss paints
- Primers and undercoats
- Varnishes and wood stains
- Bitumen and anti-corrosion coatings (vapour box compatible)
- Domestic and commercial decorating
Available In
- 0.5 inch
- 1 inch
- 1.5 inch
- 2 inch
- 2.5 inch
- 3 inch
- 4 inch
Key Features
- Extra-thick flagged bristle tips
- No bristle loss
- Smooth, streak-free finish
- Sharp cutting-in capability
- Stainless steel ferrule
- Traditional wooden handle
- Compatible with all paints and varnishes
- Vapour box compatible
Not suitable for: Not recommended for applying masonry coatings or textured finishes where a coarse natural bristle or masonry brush would be more appropriate. The finer synthetic bristles are not suited to heavily loaded thick coatings that require stiff-bristle application.
Before use, flex the bristles back and forth in your hand to remove any loose fibres, then lightly dampen the brush with water for water-based paints, or white spirit for solvent-based coatings. This helps the bristles load evenly from the start. Do not overload the brush — dip roughly a third of the bristle length into the paint for clean, controlled application without drips.
For cutting in, keep a steady hand and use the edge of the flagged tips to draw a clean line. Work in long, smooth strokes and lay off in one direction to avoid visible brush marks. When finished, clean thoroughly straight away. Dried paint in the ferrule is how brushes get ruined, so do not leave it sitting in a pot or wrapped up without cleaning.
- Flex bristles in your hand before first use to remove any loose fibres
- Dampen the bristles lightly — water for water-based paints, white spirit for solvent-based
- Load the brush by dipping roughly one third of the bristle length into the paint
- Apply with long, smooth strokes and lay off in a single direction to avoid brush marks
- Use the flagged bristle tips for cutting in along edges and frames
- Clean the brush thoroughly immediately after use, working paint out from the ferrule first
- Reshape the bristles and store flat or hanging to maintain the brush profile
Can this brush be used with both water-based and solvent-based paints?
Yes, it is compatible with all standard paints and varnishes including water-based emulsions and acrylics as well as solvent-based gloss, eggshell, and primers. Just make sure you clean the brush correctly for whichever type you are using — water and washing up liquid for water-based, white spirit for solvent-based — before the paint has a chance to dry in the bristles.
What size should I choose for cutting in?
For most cutting-in work around doors, windows, skirting and coving, a 1 inch or 1.5 inch brush gives you the best balance of control and coverage. The 0.5 inch is better suited to very fine detail work like glazing bars or narrow beading. The 2 inch and larger sizes are more practical for broader flat surfaces where you want to move faster.
The brush is constructed with synthetic filament bristles featuring flagged tips, which are split at the end to increase surface area and improve paint pick-up and release. The ferrule is stainless steel, crimped firmly to prevent movement and resist corrosion during washing. The handle is traditional lacquered wood. Suitable for use with water-based and solvent-based coatings, and rated compatible with vapour box systems for specialist coatings including bitumen-based products.
| Bristle Type | Synthetic filament with flagged tips |
|---|---|
| Ferrule Material | Stainless steel |
| Handle Material | Wooden |
| Available Sizes | 0.5", 1", 1.5", 2", 2.5", 3", 4" |
| Paint Compatibility | All water-based and solvent-based paints and varnishes |
| Vapour Box Compatible | Yes |
Be the first to review “Professional Synthetic Paint Brush (Single)”Cancel Reply
You may also like…

Prodec PREMIER Advanced Pro 6 Piece Synthetic Paint Brush Set
£14.95£17.94 EX VATINC VAT
ProDec TROJAN Pro Synthetic Brush Set – 6 Piece
£9.90£11.88 EX VATINC VAT
Related products

Timloc Universal Dry Fix Angled Ridge End Cap – 260 x 145
From £2.09£2.51 EX VATINC VAT
Contractors Disposable Mixed Paint Brush Set 10 Piece
£3.59£4.31 EX VATINC VAT
TIMCO Mixed Paint Brush Set (5 pieces)
£9.81£11.77 EX VATINC VAT
ProDec 9 Inch Tiger Twin Medium Pile 4pc Roller Set
£4.49£5.39 EX VATINC VAT








Reviews
There are no reviews yet.