SORTA-CASE – Metal Fixings Case – Large

A large metal screw case built for tradespeople who need proper organisation on site. This all-steel case measures 440 x 330 x 66mm and is designed to hold screws, fixings, drill bits, wall plugs and all the other small parts that seem to disappear the moment you need them. The removable compartments let you arrange your stock exactly how you want it, and actually keep it that way when the case gets thrown in the back of a van.

Steel construction means it takes a knock without warping or cracking. Plastic organiser cases do the job on a tidy shelf, but out on site they tend to crack at the hinges, bow under weight, or simply split when dropped from height. This case is built to a different standard. The full-length hinge runs the entire width of the lid, spreading the load so there are no weak points that fail after a few months of regular use.

What Makes This Large Metal Screw Case Worth Having

The removable compartments are the detail that makes day-to-day use genuinely practical. You can pull out a section, take it to where you are working, and put it back without emptying the whole case. For fixings jobs where you are moving between rooms or floors, that saves a surprising amount of time. Compartment layouts can be changed to suit the job, so it works equally well holding a mixed assortment of screws as it does storing a single large stock of one size.

At 440mm wide this is a serious-capacity case. It sits flat and stable on a workbench, stacks cleanly with other cases, and the steel shell means you are not going to lose your fixings stock because something heavy was put on top of it. For any tradesperson who gets through screws and fixings at volume, keeping them in a case like this is just tidier working.