A tough compartment case loaded with 900 Spectre Pro screws across six of the most-used sizes on site. Metal handle, metal catches, and a full box of each size ready to go. Ideal for keeping the van stocked and the job moving.
The Spectre Pro Screws Site Organiser Case is exactly what it sounds like: a ready-stocked, well-built screw kit designed for working tradespeople who want the right screw to hand without rummaging through a bag of mixed loose boxes. This spectre pro screws organiser case comes pre-loaded with 900 screws across six popular sizes, packed into individual compartments inside a solid carry case with metal catches and a metal handle.
Each size is there for a reason. The 4.0mm screws cover the bulk of day-to-day timber fixing, carcassing, and sheet materials. Step up to the 5.0mm range and you’ve got the length and gauge for structural timber, heavy framing, and anything that needs a bit more bite. Six sizes, all Spectre Pro quality, all in one box. Nobody’s borrowing screws off the next trade at the end of the day.
What’s Inside the Spectre Pro Screws Site Organiser
The case holds one full box of each of the following:
4.0 x 40mm (200 screws), 4.0 x 50mm (200 screws), 4.0 x 60mm (200 screws), 5.0 x 70mm (100 screws), 5.0 x 80mm (100 screws), 5.0 x 100mm (100 screws).
That’s 900 screws in total, covering everything from light joinery work through to heavier structural fixing. The compartments keep each size separated and easy to identify, which sounds like a small thing until you’re working at pace and grabbing a handful of screws without looking.
The case itself is built to take the knocks of site life. Metal catches don’t snap or work loose the way plastic clips do, and the metal handle means it carries properly when loaded. It stacks, it travels, and it fits neatly in a van without spilling everywhere. A solid bit of kit that earns its place on any job.
Pro Tip: Keep the 4.0 x 50mm compartment topped up first as it tends to run out fastest on most first and second fix timber jobs, so order a box of 200 spares before the case runs dry.
The Spectre Pro Screws Site Organiser is used across a wide range of timber fixing tasks on building sites, refurbishment projects, and fit-out work. The smaller 4.0mm screws are well suited to stud partitioning, skirting and architrave, carcassing, and general joinery work where a clean, consistent fixing is needed. The 5.0mm sizes step in for heavier structural work such as floor joinery, roof members, and dense hardwood applications where a smaller gauge would struggle.
Carpenters, joiners, and general builders will all find a use for the full range in this case. It's also a practical starter kit for tradespeople setting up a new van or a young apprentice who needs a sorted selection rather than piecemeal boxes bought as the job demands.
Best For
Stud partitioning and first fix carpentry
Carcassing and sheet material fixing
Skirting, architrave, and joinery
Structural timber and floor joinery
General site use across multiple trades
Screw Sizes Included
4.0 x 40mm (200 screws)
4.0 x 50mm (200 screws)
4.0 x 60mm (200 screws)
5.0 x 70mm (100 screws)
5.0 x 80mm (100 screws)
5.0 x 100mm (100 screws)
Key Features
900 screws total across 6 sizes
Metal handle and metal catches
Individual compartments per size
Spectre Pro quality screws throughout
Suitable for van storage and site use
Not suitable for: Not intended for masonry, concrete, or metal fixing applications. This kit covers timber work only, so you'll need the appropriate fixings if your job goes beyond wood.
Open the case and identify the size you need from the clearly separated compartments. Load into your driver or screw gun and fix as normal. When a compartment runs low, individual Spectre Pro boxes can be bought separately to top up the case without replacing the whole kit.
Select the correct screw size for the timber thickness and application in hand
Pre-drill pilot holes in hardwoods or near timber edges to reduce splitting
Load screws into your driver bit or screw gun magazine as required
Drive at a controlled speed to avoid cam-out or overdriving into the surface
Replace lids on unused compartments after each use to stop screws mixing during transit
Restock individual sizes from Spectre Pro boxes as each compartment runs low
Can I buy replacement screws to restock the individual compartments?
Yes. Spectre Pro screws are available in individual boxes across all six sizes included in this kit, so you can top up whichever compartments run out without needing to buy a whole new organiser.
Are these suitable for treated timber and pressure-treated wood?
Check the coating specification of the specific Spectre Pro screws included, as fixings used in treated or preservative-treated timber should ideally be corrosion-resistant. For outdoor or treated timber applications, confirm the screw finish is appropriate before use.
The Spectre Pro Screws Site Organiser contains 900 woodscrews across six gauges and lengths from 4.0 x 40mm up to 5.0 x 100mm. The carry case features metal hardware throughout, including catches and handle, to handle the demands of regular site use. Screws are Spectre Pro brand, manufactured to consistent tolerances for reliable driver engagement and clean, controlled fixing into softwood and hardwood timber substrates.
Reviews
There are no reviews yet.