Talon TS link spacer blocks sit between two Talon hinged clips and hold them a fixed distance apart. Handy for running neat, evenly spaced pipework in 15mm, 22mm and 28mm sizes. Several colours to match or contrast with your clips.
If you’ve ever tried to line up two pipe clips by eye, you’ll know it goes wrong around the third attempt. Talon TS Link Spacer Blocks fix that. Each block fits between two Talon hinged clips and sets them a standard distance apart, so parallel pipe runs look deliberate rather than accidental. It’s a small plastic part that does one job, and does it every time.
The Talon TS Link Spacer Blocks are sold in bags of 100, which tells you who they’re aimed at. Plumbers and heating installers working through a whole house of radiator tails, or a boiler room with several parallel runs, will get through them quickly. One bag covers a lot of pipe pairs, and the unit price makes the bag a sensible thing to keep in the van rather than a one-off purchase.
Where Talon TS Link Spacer Blocks Get Used
The classic job is two pipes running side by side, flow and return to a radiator, or hot and cold feeds along a wall. Clip one pipe, drop in a spacer block, clip the second pipe, and the gap is the same everywhere. No tape measure, no pencil marks, no stepping back to squint at it. On exposed pipework in kitchens, utility rooms and airing cupboards, that consistency is most of what makes a job look professional.
They’re also useful where the pipes are on show for good, such as chrome or coloured pipework in modern bathrooms, or visible runs in commercial fit-outs. In those cases the spacing is part of the finished look, and a block that matches or contrasts with the clip does a lot of the work for you.
Sizes and colours
The range covers 15mm, 22mm and 28mm, matched to the corresponding Talon hinged clips, so check the pipe size before you order. Colours include black, white, blue, red, yellow and chrome, depending on the size. Plenty of installers pick a colour to match the clips, though blue and red for cold and hot is a handy way of keeping a busy run readable for whoever opens the wall up in ten years.
The blocks are made to work with Talon hinged clips, so don’t expect them to suit other clip designs. If you’re not sure your existing clips are Talon, check the branding on the clip before you buy a bag of 100 spacers that don’t fit anything.
Keep a bag in the van and you’ll stop doing that annoying walk back for one more spacer.
Pro Tip: Fit the spacer block to the first clip before you screw the second one down, because adjusting spacing after both clips are fixed is a lot more fiddly than it needs to be.
Talon TS Link Spacer Blocks are used wherever two pipes run side by side and need to stay evenly spaced. Typical jobs include radiator flow and return runs, hot and cold feeds, and parallel central heating pipework along walls, skirting lines and floor voids. They suit domestic plumbing, heating installs and commercial fit-outs where visible pipework needs to look tidy. Available in 15mm, 22mm and 28mm sizes to match Talon hinged clips.
Best For
Parallel pipe runs
Radiator flow and return pipework
Hot and cold feed runs
Exposed pipework that needs a neat finish
Repeat installs where consistency matters
Compatible With
Talon hinged clips
15mm pipe size
22mm pipe size
28mm pipe size
Key Features
Sets a standard distance between clips
Sold in bags of 100
Multiple colour options
Lightweight plastic construction
Quick to fit between clips
Not suitable for: Not designed for use with clips from other manufacturers, and not intended to carry load or act as a structural support. They are spacers only.
Select the spacer block that matches your pipe size and clip colour, then fit it between two Talon hinged clips so the clips sit a set distance apart. Fix the clips to the surface, close them around the pipes, and the spacing is done.
Check the pipe size and pick the matching 15mm, 22mm or 28mm spacer blocks.
Mark your first clip position on the wall or surface.
Fit the first Talon hinged clip and fix it in place.
Position the spacer block against the clip so it sits flush.
Line up the second Talon hinged clip against the other side of the spacer block.
Fix the second clip and close both around the pipes.
Do these fit clips from other brands?
They are made to sit between Talon hinged clips, so they're not intended for use with other brands. Check your clips are Talon before ordering a full bag.
How many spacer blocks come in a bag?
The standard bag holds 100 blocks. Some sizes and colours are also offered in smaller quantities, so check the quantity option on the product page before you add to basket.
Which size should I order?
Match the spacer to the pipe size you are clipping: 15mm, 22mm or 28mm. The block needs to correspond to the Talon hinged clip size so the two sit together properly.
Talon TS Link Spacer Blocks are moulded plastic spacers designed to fit between two Talon hinged pipe clips and hold them at a standard centre distance. They are non-structural, lightweight and intended for use alongside Talon clips in 15mm, 22mm and 28mm sizes. Available in a range of colours, including black, white, blue, red, yellow and chrome finish, depending on size.
Reviews
There are no reviews yet.